Buchumschlag

Modeling of the mechanical behavior of composite at different relative humidities

The moisture diffusion and mechanical response in shear of a laminate constituted of 12 layers of glass fabric fiber/epoxy resin were evaluated. The experimental analysis of the moisture absorption of the specimens conditioned at different relative humidities, 0, 60, and 96% RH at 60°C was to...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Проблемы прочности
Datum:	2009
1. Verfasser:	Naceri, A.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інститут проблем міцності ім. Г.С. Писаренко НАН України 2009
Schlagworte:	Научно-технический раздел
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/48399
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Modeling of the mechanical behavior of composite at different relative humidities / A. Naceri // Проблемы прочности. — 2009. — № 4. — С. 133-140. — Бібліогр.: 9 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Identification method of structural defects in glass fiber fabric/epoxy resin laminate
von: Naceri, A.
Veröffentlicht: (2009)

Compression Behavior of Biodegradable Thermoplastic Plasticizer-Containing Composites
von: Guo, A.F., et al.
Veröffentlicht: (2019)

Experimental Analysis of Behavior and Damage of Sandwich Composite Materials in Three-Point Bending. Part 2. Fatigue Test Results and Damage Mechanisms
von: Bezazi, A., et al.
Veröffentlicht: (2009)

Mechanical properties and fracture behavior of high-strength steels
von: Musalek, R., et al.
Veröffentlicht: (2008)

Non-Monotonous Mechanical Behavior at the Nanoscale: Elastic and Plastic Properties
von: Zhang, X., et al.
Veröffentlicht: (2015)

Mechanical Behavior and Failure of Riveting Joints in Tensile and Shear Tests
von: Mucha, J., et al.
Veröffentlicht: (2015)

Mechanical behavior and optimization of multidirectional laminate specimens under delamination by bending
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2006)

Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
von: Bounouas, L., et al.
Veröffentlicht: (2001)

Effect of Braiding Angle on the Impact and Post-Impact Behavior of 3D Braided Composites
von: Yan, S., et al.
Veröffentlicht: (2017)

Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes
von: Bang, HanSur, et al.
Veröffentlicht: (2015)

Analysis of Viscoelastoplastic Behavior of Expanded Polystyrene under Compressive Loading: Experiments and Modeling
von: Imad, A., et al.
Veröffentlicht: (2001)

Numerical Simulation of the Damage Behavior of a Concrete Beam with an Anisotropic Damage Model
von: Long, Y.C., et al.
Veröffentlicht: (2018)

Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells
von: Han, Z.Y., et al.
Veröffentlicht: (2014)

Mechanical Behavior of TiN/TiC-n Multilayer Coatings and Ti(C,N) Multicomponent Coatings Produced by PACVD
von: Azadi, M., et al.
Veröffentlicht: (2016)

A New Method for Evaluation of Mechanical Properties of Glass/Epoxy Composites at Low Temperatures
von: Shokrieh, M.M., et al.
Veröffentlicht: (2012)

Mechanical Properties of A356 Matrix Composites Reinforced with Nano-SiC Particles
von: Mazahery, A., et al.
Veröffentlicht: (2012)

Experimental analysis of behavior and damage of sandwich composite materials in three-point bending. Part 1. Static tests and stiffness degradation at failure studies
von: Bezazi, A., et al.
Veröffentlicht: (2007)

Microstructure and Mechanical Properties of TiC Nanoparticle-Reinforced Iron-Matrix Composites
von: Kim, J.M., et al.
Veröffentlicht: (2014)

A Probabilistic Model for Describing Short Fatigue Crack Growth Behavior of LZ50 Steel
von: Yang, B., et al.
Veröffentlicht: (2016)

Study on Non-Linear Flexural Behavior of Reinforced Concrete Beams Using ANSYS by Discrete Reinforcement Modeling
von: Vasudevan, G., et al.
Veröffentlicht: (2013)

Effect of the Interfacial Transition Zone on Basic Mechanical Properties of a Solid Composite Propellant
von: Shen, L.L., et al.
Veröffentlicht: (2018)

A Computational Strategy for the Localization and Fracture of Laminated Composites. Part 2. Life Prediction by Mesoscale Modeling for Composite Structures
von: Boutaous, A., et al.
Veröffentlicht: (2011)

Comparison of the Effect of Different Heat Treatment Processes on Microstructure and Mechanical Properties of Stainless Steel Clad Plate
von: Jin, H.R., et al.
Veröffentlicht: (2017)

Morphology and Mechanical Properties of PP/LLDPE Blends and Ternary PP/LLDPE/nano-CaCO₃ Composites
von: Cheraghi, H., et al.
Veröffentlicht: (2013)

Mechanical Properties of GF/pCBT Composites and Their Fusion-Bonded Joints: Influence of Process Parameters
von: Zhang, L., et al.
Veröffentlicht: (2015)

Mechanical and Aging Properties of Polypropylene and Styrene-Butadiene-Styrene Composites under Outdoor and Indoor Conditions
von: Yimit, M., et al.
Veröffentlicht: (2018)

Relation between Mechanical Properties and Microstructure of Cast Aluminum Alloy AlSi9Cu3
von: Panuskova, M., et al.
Veröffentlicht: (2008)

Numerical Modeling and Mechanical Analysis of Combined Connection with Bolts and Welds
von: Liu, M.S, et al.
Veröffentlicht: (2016)

Preparation, Modeling, and Optimization of Mechanical Properties of Epoxy/HIPS/Silica Hybrid Nanocomposite Using Combination of Central Composite Design and Genetic Algorithm. Part 1. Study of Damping and Tensile Strengths
von: Rostamiyan, Y., et al.
Veröffentlicht: (2013)

Behavior of Strengthened Glass under High-Velocity Impact
von: Vlasov, A.S., et al.
Veröffentlicht: (2002)

Numerical Simulation of Fatigue Damage and Shape Instability Behavior of Steel 40Cr by the Damage-Coupled Crystal Plastic Model
von: Wu, G.C., et al.
Veröffentlicht: (2017)

Flexural Fatigue Behavior of Cross-Ply Laminates: An Experimental Approach
von: Bezazi, A.R., et al.
Veröffentlicht: (2003)

Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys
von: Slota, J., et al.
Veröffentlicht: (2017)

Analysis of Fracture Behavior of Thin Polycrystalline Diamond Films
von: Li, D.S., et al.
Veröffentlicht: (2014)

Investigation of Plastic Behavior of Alloyed Steel Deformed during Martensitic Transformation
von: Kandrotaitė-Janutienė, R., et al.
Veröffentlicht: (2016)

Stress Distribution Behavior in Single-Lap Adhesively Bonded Beams
von: He, X., et al.
Veröffentlicht: (2014)

Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die
von: Jiang, Q.Y., et al.
Veröffentlicht: (2018)

Shear Behavior of Non-Persistent Joint under High Normal Load
von: Sarfarazi, V., et al.
Veröffentlicht: (2017)

A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars
von: Buyukkaragoz, A., et al.
Veröffentlicht: (2013)

Influence of nitriding on the fatigue behavior and fracture micromechanisms of nodular cast Iron
von: Konecna, R., et al.
Veröffentlicht: (2008)