Constitutive description of creep behavior of Mg-4 Al-1Ca alloy
Creep behavior of an advanced magnesium alloy AX41 (4 wt.% Al, 1 wt.% Ca, Mg balanced) was investigated in temperature interval from 343 to 673 K and stresses from 2 to 200 MPa. Compressive creep experiments with stepwise loading were used in order to obtain stress dependence of the creep rate in in...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2008 |
| ISSN: | 0556-171X |
| Hauptverfasser: | Milicka, K., Dobes, F. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2008
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/48403 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Constitutive description of creep behavior of Mg-4Al-1Ca alloy / K. Milicka, F. Dobes // Проблемы прочности. — 2008. — № 1. — С. 36-39. — Бібліогр.: 5 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Constitutive Modeling for Al–Cu–Mg Alloy in Creep Aging Process
von: Yang, Y.L., et al.
Veröffentlicht: (2016)
von: Yang, Y.L., et al.
Veröffentlicht: (2016)
Compressive creep of Fe3Al-type iron aluminide with Zr additions
von: Dobes, F., et al.
Veröffentlicht: (2008)
von: Dobes, F., et al.
Veröffentlicht: (2008)
Estimation of anisotropy of mechanical properties in Mg alloys by means of compressive creep tests
von: Dobes, F., et al.
Veröffentlicht: (2008)
von: Dobes, F., et al.
Veröffentlicht: (2008)
Constitutive Behavior of 4343/4A60 Aluminum Alloy at Multi-Pass Hot Deformation
von: Tang, C., et al.
Veröffentlicht: (2017)
von: Tang, C., et al.
Veröffentlicht: (2017)
Прогнозирование термодинамических свойств расплавов системы MgO–Al₂O₃–SiO₂–CaF₂
von: Гончаров, И.А., et al.
Veröffentlicht: (2011)
von: Гончаров, И.А., et al.
Veröffentlicht: (2011)
Effect of the Microcrack Inclination Angle on Crack Propagation Behavior of TiAl Alloy
von: Feng, R.C., et al.
Veröffentlicht: (2017)
von: Feng, R.C., et al.
Veröffentlicht: (2017)
Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
von: Haq, A.U., et al.
Veröffentlicht: (2018)
von: Haq, A.U., et al.
Veröffentlicht: (2018)
Creep-induced structural changes in Ni-Si-B amorphous alloy
von: Jurikova, A., et al.
Veröffentlicht: (2008)
von: Jurikova, A., et al.
Veröffentlicht: (2008)
Effects of Sc and Zr on the texture and mechanical anisotropy of high strength Al - Zn - Mg alloy sheets
von: Deng, Y., et al.
Veröffentlicht: (2016)
von: Deng, Y., et al.
Veröffentlicht: (2016)
Construction of constitutive relationships for simple in Noll’s sense materials with viscoelastic-viscoplastic behavior
von: Lepikhin, P.P.
Veröffentlicht: (2009)
von: Lepikhin, P.P.
Veröffentlicht: (2009)
Образование шпинели в расплаве агломерированного сварочного флюса системы MgO–Al₂O₃–SiO₂–CaF₂ и ее влияние на вязкость шлака
von: Гончаров, И.А., et al.
Veröffentlicht: (2012)
von: Гончаров, И.А., et al.
Veröffentlicht: (2012)
Прогнозирование термодинамических свойств расплавов системы CaO–Al₂O₃
von: Гончаров, И.А., et al.
Veröffentlicht: (2014)
von: Гончаров, И.А., et al.
Veröffentlicht: (2014)
Creep-Fatigue Behavior Evaluation by Reversible Permeability of CrMo Ferritic Steel for Ultra-Supercritical Steem Power Plants
von: Kim, C.S.
Veröffentlicht: (2016)
von: Kim, C.S.
Veröffentlicht: (2016)
Theoretical-experimental model for predicting crack growth rate in structural alloys under combined action of fatigue and creep
von: Pokrovskii, V.V., et al.
Veröffentlicht: (2009)
von: Pokrovskii, V.V., et al.
Veröffentlicht: (2009)
Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys
von: Slota, J., et al.
Veröffentlicht: (2017)
von: Slota, J., et al.
Veröffentlicht: (2017)
Effect of Si and Mn on Microstructure and Mechanical Properties of Vacuum Suction Casting Al–4.5Cu Alloy
von: He, T., et al.
Veröffentlicht: (2018)
von: He, T., et al.
Veröffentlicht: (2018)
Hot Extrusion Effect on the Microstructure and Mechanical Properties of a Mg–Y–Nd–Zr Alloy
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)
Study of Mechanical Degradation of 9Cr-1Mo-V-Nb Steel under Creep-Fatigue Interaction Conditions
von: Kim, C.S.
Veröffentlicht: (2017)
von: Kim, C.S.
Veröffentlicht: (2017)
Investigation of Plastic Behavior of Alloyed Steel Deformed during Martensitic Transformation
von: Kandrotaitė-Janutienė, R., et al.
Veröffentlicht: (2016)
von: Kandrotaitė-Janutienė, R., et al.
Veröffentlicht: (2016)
Effect of Forging on Cyclic Hardening Behavior of CW 614 Brass Alloy
von: Mnif, R., et al.
Veröffentlicht: (2011)
von: Mnif, R., et al.
Veröffentlicht: (2011)
Стойкость сплавов системы Al—Zn—Mg—Cu против образования горячих трещин при аргонодуговой сварке
von: Ищенко, А.Я., et al.
Veröffentlicht: (2007)
von: Ищенко, А.Я., et al.
Veröffentlicht: (2007)
Small punch testing and Its numerical simulations under constant deflection force conditions
von: Dymacek, P., et al.
Veröffentlicht: (2008)
von: Dymacek, P., et al.
Veröffentlicht: (2008)
Influence of Temperature on Fatigue Crack Propagation in TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)
von: Feng, R.C., et al.
Veröffentlicht: (2014)
Improved Method of Fatigue Life Assessment for TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)
von: Feng, R.C., et al.
Veröffentlicht: (2014)
The Sources and Affecting Factors of Creep Threshold Stress of Magnesium Based Composite
von: Tian, J.
Veröffentlicht: (2016)
von: Tian, J.
Veröffentlicht: (2016)
Microstructural features of failure surfaces and low-temperature mechanical properties of Ti-6Al-4V ELI ultra-fine grained alloy
von: Tabachnikova, E.D., et al.
Veröffentlicht: (2008)
von: Tabachnikova, E.D., et al.
Veröffentlicht: (2008)
Surface Strengthening Behavior of Magnesium Alloy with Laser Thermal Loading under Rapid Cooling
von: Ge, Y.Q., et al.
Veröffentlicht: (2018)
von: Ge, Y.Q., et al.
Veröffentlicht: (2018)
Fatigue behavior of dissimilar friction stir welds between cast and wrought aluminum alloys
von: Uematsu, Y., et al.
Veröffentlicht: (2008)
von: Uematsu, Y., et al.
Veröffentlicht: (2008)
Прочностные характеристики Mg-Li-сплавов
von: Регенер, Д., et al.
Veröffentlicht: (2009)
von: Регенер, Д., et al.
Veröffentlicht: (2009)
Comparison between Isothermal and Non-Isothermal Fatigue Behavior in a Cast Aluminum-Silicon-Magnesium Alloy
von: Azadi, M., et al.
Veröffentlicht: (2015)
von: Azadi, M., et al.
Veröffentlicht: (2015)
Influence of Tantalum Addition on Microstructure and Mechanical Properties of the NiAl-Based Eutectic Alloy
von: Sheng, L.Y., et al.
Veröffentlicht: (2017)
von: Sheng, L.Y., et al.
Veröffentlicht: (2017)
Creep Failure Time of Thin-Walled Pipes under Combined Internal Pressure, Bending, and Tension
von: El Megharbel, A.
Veröffentlicht: (2010)
von: El Megharbel, A.
Veröffentlicht: (2010)
Corrosion fatigue behavior of extruded AZ80, AZ61, and AM60 magnesium alloys in distilled water
von: Uematsu, Y., et al.
Veröffentlicht: (2008)
von: Uematsu, Y., et al.
Veröffentlicht: (2008)
Experimental Investigation on Microstructure and Mechanical Properties of Direct Squeeze Cast Al–13%Si Alloy
von: Souissi, S., et al.
Veröffentlicht: (2012)
von: Souissi, S., et al.
Veröffentlicht: (2012)
Accelerating Effects of Cyclic Creep Due to the Alternative Load Compared with Constant Load for CD 304L
von: Daei-Sorkhabi, A.H., et al.
Veröffentlicht: (2015)
von: Daei-Sorkhabi, A.H., et al.
Veröffentlicht: (2015)
Термодинамические свойства расплавов системы CaO–SiO₂
von: Гончаров, И.А., et al.
Veröffentlicht: (2015)
von: Гончаров, И.А., et al.
Veröffentlicht: (2015)
Effect of Aging Treatment on Surface Roughness, Mechanical Properties, and Fracture Behavior of 6xxx and 7xxx Aluminum Alloys
von: Sevim, I., et al.
Veröffentlicht: (2014)
von: Sevim, I., et al.
Veröffentlicht: (2014)
Relation between Mechanical Properties and Microstructure of Cast Aluminum Alloy AlSi9Cu3
von: Panuskova, M., et al.
Veröffentlicht: (2008)
von: Panuskova, M., et al.
Veröffentlicht: (2008)
Microstructure and Wear Properties of the Quasi-Rapidly Solidified NiAl/ Cr(Mo,Dy) Hypoeutectic Alloy
von: Sheng, L.Y.
Veröffentlicht: (2016)
von: Sheng, L.Y.
Veröffentlicht: (2016)
Creep Lifetime Assessment of Pressure-Tight PE100 Pipes Based on a Slow Fatigue Crack Growth
von: Luo, W.B., et al.
Veröffentlicht: (2018)
von: Luo, W.B., et al.
Veröffentlicht: (2018)
Ähnliche Einträge
-
Constitutive Modeling for Al–Cu–Mg Alloy in Creep Aging Process
von: Yang, Y.L., et al.
Veröffentlicht: (2016) -
Compressive creep of Fe3Al-type iron aluminide with Zr additions
von: Dobes, F., et al.
Veröffentlicht: (2008) -
Estimation of anisotropy of mechanical properties in Mg alloys by means of compressive creep tests
von: Dobes, F., et al.
Veröffentlicht: (2008) -
Constitutive Behavior of 4343/4A60 Aluminum Alloy at Multi-Pass Hot Deformation
von: Tang, C., et al.
Veröffentlicht: (2017) -
Прогнозирование термодинамических свойств расплавов системы MgO–Al₂O₃–SiO₂–CaF₂
von: Гончаров, И.А., et al.
Veröffentlicht: (2011)