Buchumschlag

Mechanical properties and fracture behavior of high-strength steels

Typical thicknesses ofhigh-strength steels (HSS) sheets used in the car industry are inapplicablefor standardized testingprocedures. The aim ofthis study is topropose an appropriate methodologyfor testing and comparing of thin HSS sheets. Microstructures were observed by means of light and scanning...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Проблемы прочности
Datum:	2008
Hauptverfasser:	Musalek, R., Hausild, P., Siegl, J., Bensch, J., Slama, J.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інститут проблем міцності ім. Г.С. Писаренко НАН України 2008
Schlagworte:	Научно-технический раздел
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/48419
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Mechanical properties and fracture behavior of high-strength steels / R. Musalek, P. Hausild, J. Siegl, J. Bensch, J. Slama // Проблемы прочности. — 2008. — № 1. — С. 155-158. — Бібліогр.: 5 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Microstructure and fracture morphology of thermally sprayed refractory metals and ceramics
von: Kovarik, O., et al.
Veröffentlicht: (2008)

Study on the Cracking Mechanism of YQ450NQR1 High-Strength Weathering Steel
von: Qing, J.S., et al.
Veröffentlicht: (2018)

Cryogenic Fracture Behavior of Metastable Austenitic Stainless Steel in a High Magnetic Field
von: Shindo, Y., et al.
Veröffentlicht: (2010)

Review of new formats for fracture mechanics parameters
von: Landes, J.D., et al.
Veröffentlicht: (2006)

Flexural Fracture Toughness and First-Crack Strength Tests of Steel Fiber-Silica Fume Concrete and Its Engineering Applications
von: Zhang, J.P., et al.
Veröffentlicht: (2018)

Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures
von: Arsić, D., et al.
Veröffentlicht: (2016)

Strain-Induced Precipitation Kinetics of Vanadium Carbonitride Precipitates with the Cubic Structure in High-Strength Weathering Steels
von: Cheng, J., et al.
Veröffentlicht: (2018)

Influence of H₂S Corrosion on Tensile Properties and Fracture Toughness of X80 Pipeline Steel
von: Gu, L., et al.
Veröffentlicht: (2019)

Deformability Behavior of St3 Steel Used in the Profiles of High-Voltage Poles
von: Jutas, A., et al.
Veröffentlicht: (2018)

High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2017)

Optimization Analysis of Initial Sheet Metal Contour Line for High-Strength Boron Steel in Hot Stamping
von: Zhang, Z.Q., et al.
Veröffentlicht: (2016)

Effects of Sc and Zr on the texture and mechanical anisotropy of high strength Al - Zn - Mg alloy sheets
von: Deng, Y., et al.
Veröffentlicht: (2016)

Deformation and fracture of high-temperature steels at different temperatures and loading rates
von: Kondryakov, E.A., et al.
Veröffentlicht: (2009)

Evaluation of the Test Temperature Effect on Failure Mechanisms and Notched Impact Strength Characteristics of Ultra-Hard Low Alloy Steels
von: Binar, T., et al.
Veröffentlicht: (2011)

Evaluation of Metal-Active Gas Double-Sided Double-Power Arc Welded Joints of High-Strength Low-Alloy Steel
von: Chen, Y.X., et al.
Veröffentlicht: (2015)

Mechanical Behavior and Failure of Riveting Joints in Tensile and Shear Tests
von: Mucha, J., et al.
Veröffentlicht: (2015)

Microstructure and Microhardness of Fiber Laser Welded Dual-Phase Steels with High-Strength Low-Alloy Steels
von: Švec, P., et al.
Veröffentlicht: (2017)

Strength Improvement of Ferritic/Martensitic T91 Steel by Cross Wedge Rolling at Different Austenitizing Temperatures
von: He, T., et al.
Veröffentlicht: (2017)

Analysis of Fracture Behavior of Thin Polycrystalline Diamond Films
von: Li, D.S., et al.
Veröffentlicht: (2014)

Microstructure and Mechanical Properties of an Underwater Wet Welded Dissimilar Ferritic/Austenitic Steel Joint
von: Guo, N., et al.
Veröffentlicht: (2015)

Shear Strength Optimization of Laser-Joined Polyphenylene Sulfide-Based CFRTP and Stainless Steel
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)

Influence of nitriding on the fatigue behavior and fracture micromechanisms of nodular cast Iron
von: Konecna, R., et al.
Veröffentlicht: (2008)

Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
von: Ji, S.J., et al.
Veröffentlicht: (2015)

Assessment of the Microstructure and Mechanical Properties of a Laser-Joined Carbon Fiber-Reinforced Thermosetting Plastic and Stainless Steel
von: Sheng, L.Y., et al.
Veröffentlicht: (2018)

Numerical Simulation of Steel Target Penetration by Shaped Charge Distended Jet with a High-Polymer Liner
von: Yi, J.Y., et al.
Veröffentlicht: (2017)

Study on High-Strength Ring Chain Dynamic Characteristics under Different Launch Parameters
von: Zhang, Q., et al.
Veröffentlicht: (2018)

Microstructural and fracture analysis of aged cast duplex steel
von: Dyja, D., et al.
Veröffentlicht: (2008)

Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes
von: Bang, HanSur, et al.
Veröffentlicht: (2015)

Non-Monotonous Mechanical Behavior at the Nanoscale: Elastic and Plastic Properties
von: Zhang, X., et al.
Veröffentlicht: (2015)

Analysis of Warm Prestressing Effect on Fracture Toughness of Reactor Pressure Vessel Steels
von: Beleznai, R., et al.
Veröffentlicht: (2010)

Effect of Grinding Parameters on the Surface Quality of Cutting Tools Made of High-Speed Low-Alloy Steels
von: Jaworski, J., et al.
Veröffentlicht: (2016)

Microstructure and Mechanical Properties of TiC Nanoparticle-Reinforced Iron-Matrix Composites
von: Kim, J.M., et al.
Veröffentlicht: (2014)

Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
von: Zapletal, J., et al.
Veröffentlicht: (2008)

Behavior of Self-Compacting Concrete-Filled Steel Tube Columns with Inclined Stiffener Ribs under Axial Compression
von: Liang, W., et al.
Veröffentlicht: (2017)

Fatigue Fracture Analysis of Composite Plates with an Elliptical Hole
von: Kielbasa, B., et al.
Veröffentlicht: (2017)

Hot-cracking of high-alloyed steels evaluated by wedge rolling test
von: Schindler, I., et al.
Veröffentlicht: (2008)

Tensile strength of the brittle materials, probabilistic or deterministic approach?
von: Jeong, J., et al.
Veröffentlicht: (2006)

Fracture Toughness and Crack Resistance of Steam Pipeline Steel in Initial and Used States
von: Zrilic, M., et al.
Veröffentlicht: (2004)

Investigation of Plastic Behavior of Alloyed Steel Deformed during Martensitic Transformation
von: Kandrotaitė-Janutienė, R., et al.
Veröffentlicht: (2016)

Effect of Tungsten-Inert-Gas Preheating on Mechanical and Microstructure Properties of Friction Stir Welded Dissimilar Al Alloy and Mild Steel
von: Bang, HanSur, et al.
Veröffentlicht: (2016)