Registration and assessment of load cycles in pipelines
An optimized load cycle registration and assessment method was developed on the basis of evaluation of the fatigue test series with arched test pieces. The tests were performed under Wohler-type and transient loading conditions. Test results were evaluated using different load cycle registration a...
Saved in:
| Published in: | Проблемы прочности |
|---|---|
| Date: | 2009 |
| Main Authors: | Torop, O., Schmidt, V. |
| Format: | Article |
| Language: | English |
| Published: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2009
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/48429 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Registration and assessment of load cycles in pipelines / O. Torop, V. Schmidt // Проблемы прочности. — 2009. — № 5. — С.109-117. — Бібліогр.: 13 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
The limit load calculations for pipelines with axial complex-shaped defects
by: Bogdan, A.V., et al.
Published: (2009)
by: Bogdan, A.V., et al.
Published: (2009)
Prediction of residual pipeline resource taking into account the operation loading conditions
by: Banahevych, Yu.V., et al.
Published: (2009)
by: Banahevych, Yu.V., et al.
Published: (2009)
Discrepancy Analysis of Load–Displacement in the Combination Space for Concrete Box Girder Assessment
by: Ye, X.F., et al.
Published: (2018)
by: Ye, X.F., et al.
Published: (2018)
Assessment of the Low-Cycle Strain-Induced Martensite Transformation in AISI 316 Stainless Steel by Magnetic and Acoustic Nondestructive Methods
by: Kim, C.S.
Published: (2018)
by: Kim, C.S.
Published: (2018)
Fracture Toughness and Crack Resistance of Steam Pipeline Steel in Initial and Used States
by: Zrilic, M., et al.
Published: (2004)
by: Zrilic, M., et al.
Published: (2004)
Influence of H₂S Corrosion on Tensile Properties and Fracture Toughness of X80 Pipeline Steel
by: Gu, L., et al.
Published: (2019)
by: Gu, L., et al.
Published: (2019)
Modified Norris–Landzberg Model and Optimum Design of Temperature Cycling ALT
by: Sun, F.Q., et al.
Published: (2016)
by: Sun, F.Q., et al.
Published: (2016)
Accelerating Effects of Cyclic Creep Due to the Alternative Load Compared with Constant Load for CD 304L
by: Daei-Sorkhabi, A.H., et al.
Published: (2015)
by: Daei-Sorkhabi, A.H., et al.
Published: (2015)
Elastoplastic Model of Sand under Complex Loading
by: Wan, Z., et al.
Published: (2018)
by: Wan, Z., et al.
Published: (2018)
Experimental Study of Concrete Subjected to Explosive Loading
by: Rekucki, R., et al.
Published: (2002)
by: Rekucki, R., et al.
Published: (2002)
Fracture of Polymethylmethacrylate under Pulse Loading Conditions
by: Atroshenko, S.A., et al.
Published: (2002)
by: Atroshenko, S.A., et al.
Published: (2002)
High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
by: Hu, X.L., et al.
Published: (2017)
by: Hu, X.L., et al.
Published: (2017)
Effect of Preliminary Torsional Strain on Low-Cycle Fatigue of Q345B Structural Steel
by: Hu, X.L., et al.
Published: (2019)
by: Hu, X.L., et al.
Published: (2019)
Pipeline life extension and integrity management based on optimized use of above ground survey data and inline inspection results
by: Francis, A., et al.
Published: (2009)
by: Francis, A., et al.
Published: (2009)
Cyclic cracking resistance of brittle materials in compressive loading
by: Lanin, A.G.
Published: (2009)
by: Lanin, A.G.
Published: (2009)
Response of an Indented Square Tube under Impact Loading
by: Tan, Z.H., et al.
Published: (2015)
by: Tan, Z.H., et al.
Published: (2015)
Modal Analysis of the Turbine Blade at Complex Thermomechanical Loads
by: Witek, L., et al.
Published: (2016)
by: Witek, L., et al.
Published: (2016)
Deformation and fracture of high-temperature steels at different temperatures and loading rates
by: Kondryakov, E.A., et al.
Published: (2009)
by: Kondryakov, E.A., et al.
Published: (2009)
Effect of Impact Load on Dynamic Buckling of Steel Lattice Arch
by: Liu, M.S., et al.
Published: (2017)
by: Liu, M.S., et al.
Published: (2017)
Fracture Process in ± θ Laminates Subjected to Mode II Loading
by: Ahmed Benyahia, A., et al.
Published: (2002)
by: Ahmed Benyahia, A., et al.
Published: (2002)
Investigation of Fracture of Spheroplastics under Static and Dynamic Loading Conditions
by: Atroshenko, S.A., et al.
Published: (2002)
by: Atroshenko, S.A., et al.
Published: (2002)
Vibrations of a Complex Systems with Damping under Dynamic Loading
by: Cabanska-Placzkiewicz, K.
Published: (2002)
by: Cabanska-Placzkiewicz, K.
Published: (2002)
Lateral Torsional Buckling of an Eccentrically Loaded Channel Section Beam
by: Dahmani, L., et al.
Published: (2015)
by: Dahmani, L., et al.
Published: (2015)
Service loading test as a source for the fatigue curve parameters’ estimation
by: Gadolina, I.V., et al.
Published: (2009)
by: Gadolina, I.V., et al.
Published: (2009)
Linear Micropolar Elasticity Analysis of Stresses in Bones under Static Loads
by: Eremeyev, V.A., et al.
Published: (2017)
by: Eremeyev, V.A., et al.
Published: (2017)
Evolution of discrete phenomena of inelasticity in aluminum alloy under cyclic loading
by: Pisarenko, G.G., et al.
Published: (2009)
by: Pisarenko, G.G., et al.
Published: (2009)
Shear Behavior of Non-Persistent Joint under High Normal Load
by: Sarfarazi, V., et al.
Published: (2017)
by: Sarfarazi, V., et al.
Published: (2017)
Dynamic Response of Pavement Plates to the Positive and Negative Phases of the Friedlander Load
by: Alisjahbana, S.W., et al.
Published: (2018)
by: Alisjahbana, S.W., et al.
Published: (2018)
Experimental and Theoretical Design Methodology of Hemispherical Shells under Extreme Static Loading
by: Galiev, Sh.U., et al.
Published: (2004)
by: Galiev, Sh.U., et al.
Published: (2004)
Method of Prevention of Fracture of Welded Metal Structural Elements Subjected to Single Dynamic Loads
by: Kir’yan, V.I., et al.
Published: (2002)
by: Kir’yan, V.I., et al.
Published: (2002)
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels
by: Kaščák, L., et al.
Published: (2016)
by: Kaščák, L., et al.
Published: (2016)
Comparison of fatigue criteria for combined bending-torsion loading of nitrided and virgin specimens
by: Major, S., et al.
Published: (2008)
by: Major, S., et al.
Published: (2008)
Lateral Torsional Buckling Response of Steel Beam with Different Boundary Conditions and Loading
by: Dahmani, L., et al.
Published: (2014)
by: Dahmani, L., et al.
Published: (2014)
Static and Dynamic Buckling of Rectangular Functionally Graded Plates Subjected to Thermal Loading
by: Czechowski, L., et al.
Published: (2013)
by: Czechowski, L., et al.
Published: (2013)
Crack initiation and endurance limit of hard steels under multiaxial cyclic loads
by: Bomas, H., et al.
Published: (2008)
by: Bomas, H., et al.
Published: (2008)
Analysis of Viscoelastoplastic Behavior of Expanded Polystyrene under Compressive Loading: Experiments and Modeling
by: Imad, A., et al.
Published: (2001)
by: Imad, A., et al.
Published: (2001)
Residual Strains of Filter Materials Reinforced with Grid Inclusions under Cyclic Loading
by: Lin, Y.L., et al.
Published: (2015)
by: Lin, Y.L., et al.
Published: (2015)
Simulation of the Mechanical Characteristics of a Granular Matter Tested under Biaxial Loading
by: Bi, Z.W., et al.
Published: (2015)
by: Bi, Z.W., et al.
Published: (2015)
Elastoplastic Damage Model for Concrete under Triaxial Compression and Reversed Cyclic Loading
by: Zhang, J., et al.
Published: (2018)
by: Zhang, J., et al.
Published: (2018)
Radiation-Induced Embrittlement of WWER-440 Reactor Pressure Vessel Steel under Loading
by: Grinik, E.U., et al.
Published: (2003)
by: Grinik, E.U., et al.
Published: (2003)
Similar Items
-
The limit load calculations for pipelines with axial complex-shaped defects
by: Bogdan, A.V., et al.
Published: (2009) -
Prediction of residual pipeline resource taking into account the operation loading conditions
by: Banahevych, Yu.V., et al.
Published: (2009) -
Discrepancy Analysis of Load–Displacement in the Combination Space for Concrete Box Girder Assessment
by: Ye, X.F., et al.
Published: (2018) -
Assessment of the Low-Cycle Strain-Induced Martensite Transformation in AISI 316 Stainless Steel by Magnetic and Acoustic Nondestructive Methods
by: Kim, C.S.
Published: (2018) -
Fracture Toughness and Crack Resistance of Steam Pipeline Steel in Initial and Used States
by: Zrilic, M., et al.
Published: (2004)