Crack growth in FeP04 steel under cyclic tension for different notches on the basis of its microstructure
We present the results of experimental work carried out in order to analyze the initiation and propagation of fatigue cracks in FeP04 steel. The tests were performed in plane specimens under cyclic tension by keeping constant the nominal load ratio R = 0. Crack paths on the basis of the tested mater...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2008 |
| ISSN: | 0556-171X |
| 1. Verfasser: | Rozumek, D. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2008
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/48437 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Crack growth in FeP04 steel under cyclic tension for different notches on the basis of its microstructure / D. Rozumek // Проблемы прочности. — 2008. — № 1. — С. 121-124. — Бібліогр.: 7 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Fatigue properties of notched specimens made of FeP04 steel
von: D. Rozumek, et al.
Veröffentlicht: (2011)
von: D. Rozumek, et al.
Veröffentlicht: (2011)
Fatigue properties of notched specimens made of FeP04 steel
von: Rozumek, D., et al.
Veröffentlicht: (2011)
von: Rozumek, D., et al.
Veröffentlicht: (2011)
Influence of oxygenation time on crack growth in titanium alloy under cyclic bending
von: D. Rozumek, et al.
Veröffentlicht: (2011)
von: D. Rozumek, et al.
Veröffentlicht: (2011)
Influence of oxygenation time on crack growth in titanium alloy under cyclic bending
von: Rozumek, D., et al.
Veröffentlicht: (2011)
von: Rozumek, D., et al.
Veröffentlicht: (2011)
Influence of notch radius on fatigue crack propagation in beam specimens of 2017A-T4 alloy
von: D. Rozumek, et al.
Veröffentlicht: (2017)
von: D. Rozumek, et al.
Veröffentlicht: (2017)
The influence of microstructure components on static crack growth resistance of 13KhMF steel
von: I. R. Dzioba
Veröffentlicht: (2011)
von: I. R. Dzioba
Veröffentlicht: (2011)
Review of formulas to describe the fatigue crack growth rate
von: D. Rozumek
Veröffentlicht: (2013)
von: D. Rozumek
Veröffentlicht: (2013)
Review of formulas to describe the fatigue crack growth rate
von: Rozumek, D.
Veröffentlicht: (2013)
von: Rozumek, D.
Veröffentlicht: (2013)
Short Fatigue Crack Growth at Different Maintenance Times for LZ50 Steel
von: Yang, B., et al.
Veröffentlicht: (2015)
von: Yang, B., et al.
Veröffentlicht: (2015)
Peculiarities of microstructure of multilayer welds with different susceptibility to hot cracking
von: K. A. Jushchenko, et al.
Veröffentlicht: (2016)
von: K. A. Jushchenko, et al.
Veröffentlicht: (2016)
Crack growth specific features under static and low-cyclic loading
von: V. A. Skachkov, et al.
Veröffentlicht: (2015)
von: V. A. Skachkov, et al.
Veröffentlicht: (2015)
Brittle Mixed-Mode (I+II) Fracture: Application of the Equivalent Notch Stress Intensity Factor to the Cracks Emanating From Notches
von: Minor, H. El, et al.
Veröffentlicht: (2002)
von: Minor, H. El, et al.
Veröffentlicht: (2002)
Crack initiation and endurance limit of hard steels under multiaxial cyclic loads
von: Bomas, H., et al.
Veröffentlicht: (2008)
von: Bomas, H., et al.
Veröffentlicht: (2008)
Fatigue crack growth in AlCu4Mg1 under nonproportional bending with torsion loading
von: Rozumek, D., et al.
Veröffentlicht: (2010)
von: Rozumek, D., et al.
Veröffentlicht: (2010)
Correlation of uniaxial cyclic torsion and tension-compression for low-cycle fatigue
von: T. Lagoda, et al.
Veröffentlicht: (2017)
von: T. Lagoda, et al.
Veröffentlicht: (2017)
Strength and cyclic crack growth resistance of thermally deformed Al–Mg–Sc alloys
von: O. P. Ostash, et al.
Veröffentlicht: (2021)
von: O. P. Ostash, et al.
Veröffentlicht: (2021)
Anisotropy of cyclic crack growth resistance of aluminium alloys after long-term operation
von: I. M. Andreiko, et al.
Veröffentlicht: (2016)
von: I. M. Andreiko, et al.
Veröffentlicht: (2016)
Effect of cyclic loading on microstructure and cold resistance of HAZ metal of steel 10G2FB
von: V. D. Poznjakov, et al.
Veröffentlicht: (2014)
von: V. D. Poznjakov, et al.
Veröffentlicht: (2014)
Fatigue crack growth in AlCu4Mg1 under non-proportional bending with torsion loading
von: D. Rozumek, et al.
Veröffentlicht: (2010)
von: D. Rozumek, et al.
Veröffentlicht: (2010)
To the Theory of Growth of Mode I Fatigue Cracks in Thin Isotropic Plates of Finite Sizes under Unilateral Tension-Compression
von: V. P. Golub, et al.
Veröffentlicht: (2018)
von: V. P. Golub, et al.
Veröffentlicht: (2018)
Structure, Crystallization and Thermal Behavior of Fluorinated ethylene propylene (FEP) based Plastics Composites
von: Chen Jian-bing, et al.
Veröffentlicht: (2018)
von: Chen Jian-bing, et al.
Veröffentlicht: (2018)
The influence of hydrogenon static crack growth resistance of refractory steels
von: L. M. Ivaskevych, et al.
Veröffentlicht: (2012)
von: L. M. Ivaskevych, et al.
Veröffentlicht: (2012)
Strength and fatigue crack growth resistance of as-cast graphitic steels
von: I. M. Andreiko, et al.
Veröffentlicht: (2013)
von: I. M. Andreiko, et al.
Veröffentlicht: (2013)
Environmentally-assisted fatigue crack growth in prestressing steel wires
von: J. Toribio, et al.
Veröffentlicht: (2011)
von: J. Toribio, et al.
Veröffentlicht: (2011)
Environmentally-assisted fatigue crack growth in prestressing steel wires
von: Toribio, J., et al.
Veröffentlicht: (2011)
von: Toribio, J., et al.
Veröffentlicht: (2011)
Theoretical prediction of fatigue crack growth in load-carrying welded structures at random spectrum of cyclic loading
von: V. I. Makhnenko, et al.
Veröffentlicht: (2009)
von: V. I. Makhnenko, et al.
Veröffentlicht: (2009)
Kinetics of growth of corrosion cracks in pipe steel 17G1S
von: V. I. Makhnenko, et al.
Veröffentlicht: (2010)
von: V. I. Makhnenko, et al.
Veröffentlicht: (2010)
Growth of corrosion cracks in structural steel 10GN2MFA
von: V. I. Makhnenko, et al.
Veröffentlicht: (2012)
von: V. I. Makhnenko, et al.
Veröffentlicht: (2012)
Corrosion fatigue crack growth resistance of steel for boom sprayers frame
von: A. M. Syrotiuk, et al.
Veröffentlicht: (2020)
von: A. M. Syrotiuk, et al.
Veröffentlicht: (2020)
Influence of Phase Composition and Microstructure on Mechanical Behaviour of the Metastable Ti—3Al—4.5Fe—7.2Cr and VT22 Titanium β-Alloys under Tension with Different Rates
von: Markovsky, P.E., et al.
Veröffentlicht: (2016)
von: Markovsky, P.E., et al.
Veröffentlicht: (2016)
Notch Effect on the Fatigue Behavior of a Hot Dip Galvanized Structural Steel
von: Berto, F., et al.
Veröffentlicht: (2015)
von: Berto, F., et al.
Veröffentlicht: (2015)
Propagation of surface crack-like defect in welded joints of steel 06GB-390 at cyclic loading
von: Ju. Barvinko, et al.
Veröffentlicht: (2012)
von: Ju. Barvinko, et al.
Veröffentlicht: (2012)
Short Fatigue Crack Behavior of LZ50 Axle Steel under Rotating-Bending Cyclic Loading
von: Yang, B., et al.
Veröffentlicht: (2018)
von: Yang, B., et al.
Veröffentlicht: (2018)
Distribution of microdamages of low -carbon steel St1.03 12 sheets under tension with different velocities
von: O. R. Hokhman, et al.
Veröffentlicht: (2013)
von: O. R. Hokhman, et al.
Veröffentlicht: (2013)
The influence of crack faces friction on fatigue crack growth resistance of 65H steel under transverse shear
von: T. M. Lenkovskyi
Veröffentlicht: (2014)
von: T. M. Lenkovskyi
Veröffentlicht: (2014)
Fatigue crack growth resistance characteristics of steels under transverse shear (Review)
von: T. M. Lenkovskyi
Veröffentlicht: (2014)
von: T. M. Lenkovskyi
Veröffentlicht: (2014)
Develop¬ment of in-laboratory method of steel degradation for assessing their crack growth resistance
von: M. I. Hredil, et al.
Veröffentlicht: (2021)
von: M. I. Hredil, et al.
Veröffentlicht: (2021)
Micromechanical Coupled Study of Crack Growth Initiation Criterion in Pressure Vessel Steel
von: Rakin, M., et al.
Veröffentlicht: (2004)
von: Rakin, M., et al.
Veröffentlicht: (2004)
Vacuum Crack Growth Behavior of Austenitic Stainless Steel under Fatigue Loading
von: Takeda, T., et al.
Veröffentlicht: (2011)
von: Takeda, T., et al.
Veröffentlicht: (2011)
Stresses in anisotropic halfplane with notches
von: O. V. Maksymovych, et al.
Veröffentlicht: (2015)
von: O. V. Maksymovych, et al.
Veröffentlicht: (2015)
Ähnliche Einträge
-
Fatigue properties of notched specimens made of FeP04 steel
von: D. Rozumek, et al.
Veröffentlicht: (2011) -
Fatigue properties of notched specimens made of FeP04 steel
von: Rozumek, D., et al.
Veröffentlicht: (2011) -
Influence of oxygenation time on crack growth in titanium alloy under cyclic bending
von: D. Rozumek, et al.
Veröffentlicht: (2011) -
Influence of oxygenation time on crack growth in titanium alloy under cyclic bending
von: Rozumek, D., et al.
Veröffentlicht: (2011) -
Influence of notch radius on fatigue crack propagation in beam specimens of 2017A-T4 alloy
von: D. Rozumek, et al.
Veröffentlicht: (2017)