Quantitative fractographic analysis of impact fracture surfaces of steel R73

Macroscopic images offracture surfaces of Charpy test specimens of steel R73 were studied, where bright spots in images represent cleavage facets or ductile dimples, respectively, both in special orientations. Within image analysis, they may be taken for the most significant textural element. Being...

Повний опис

Збережено в:
Бібліографічні деталі
Опубліковано в: :Проблемы прочности
Дата:2008
Автори: Mrazkova, L., Lauschmann, L.
Формат: Стаття
Мова:Англійська
Опубліковано: Інститут проблем міцності ім. Г.С. Писаренко НАН України 2008
Теми:
Онлайн доступ:https://nasplib.isofts.kiev.ua/handle/123456789/48455
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Цитувати:Quantitative fractographic analysis of impact fracture surfaces of steel R73 / L. Mrazkova, H. Lauschmann // Проблемы прочности. — 2008. — № 1. — С. 77-80. — Бібліогр.: 2 назв. — англ.

Репозитарії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
_version_ 1862731672363991040
author Mrazkova, L.
Lauschmann, L.
author_facet Mrazkova, L.
Lauschmann, L.
citation_txt Quantitative fractographic analysis of impact fracture surfaces of steel R73 / L. Mrazkova, H. Lauschmann // Проблемы прочности. — 2008. — № 1. — С. 77-80. — Бібліогр.: 2 назв. — англ.
collection DSpace DC
container_title Проблемы прочности
description Macroscopic images offracture surfaces of Charpy test specimens of steel R73 were studied, where bright spots in images represent cleavage facets or ductile dimples, respectively, both in special orientations. Within image analysis, they may be taken for the most significant textural element. Being the brightest patches in the image, they can be extracted by thresholding. Their counts and area distribution are closely related to temperature and impact energy. Выполнены исследования макроизображений поверхностей разрушений образцов Шарпи из стали R73. При специальных условиях ориентации поверхностей разрушения видны яркие участки на изображениях, соответствующие граням скола или ямкам вязкого разрушения. Эти участки могут быть использованы в качестве основного элемента текстуры для обработки изображения. Поскольку эти участки на изображениях являются наиболее яркими, их можно отсеять путем настройки порогового уровня освещенности. Результаты расчета относительной доли их площади тесно коррелируют с температурой и энергией ударного разрушения.
first_indexed 2025-12-07T19:27:27Z
format Article
fulltext
id nasplib_isofts_kiev_ua-123456789-48455
institution Digital Library of Periodicals of National Academy of Sciences of Ukraine
issn 0556-171X
language English
last_indexed 2025-12-07T19:27:27Z
publishDate 2008
publisher Інститут проблем міцності ім. Г.С. Писаренко НАН України
record_format dspace
spelling Mrazkova, L.
Lauschmann, L.
2013-08-19T18:28:03Z
2013-08-19T18:28:03Z
2008
Quantitative fractographic analysis of impact fracture surfaces of steel R73 / L. Mrazkova, H. Lauschmann // Проблемы прочности. — 2008. — № 1. — С. 77-80. — Бібліогр.: 2 назв. — англ.
0556-171X
https://nasplib.isofts.kiev.ua/handle/123456789/48455
539. 4
Macroscopic images offracture surfaces of Charpy test specimens of steel R73 were studied, where bright spots in images represent cleavage facets or ductile dimples, respectively, both in special orientations. Within image analysis, they may be taken for the most significant textural element. Being the brightest patches in the image, they can be extracted by thresholding. Their counts and area distribution are closely related to temperature and impact energy.
Выполнены исследования макроизображений поверхностей разрушений образцов Шарпи из стали R73. При специальных условиях ориентации поверхностей разрушения видны яркие участки на изображениях, соответствующие граням скола или ямкам вязкого разрушения. Эти участки могут быть использованы в качестве основного элемента текстуры для обработки изображения. Поскольку эти участки на изображениях являются наиболее яркими, их можно отсеять путем настройки порогового уровня освещенности. Результаты расчета относительной доли их площади тесно коррелируют с температурой и энергией ударного разрушения.
This research has been supported by the Ministry of Education of the
 Czech Republic, research project “Diagnostics of materials” No. MSM 6840770021.
en
Інститут проблем міцності ім. Г.С. Писаренко НАН України
Проблемы прочности
Научно-технический раздел
Quantitative fractographic analysis of impact fracture surfaces of steel R73
Оличественный фрактографический анализ поверхностей ударного разрушения стали R73
Article
published earlier
spellingShingle Quantitative fractographic analysis of impact fracture surfaces of steel R73
Mrazkova, L.
Lauschmann, L.
Научно-технический раздел
title Quantitative fractographic analysis of impact fracture surfaces of steel R73
title_alt Оличественный фрактографический анализ поверхностей ударного разрушения стали R73
title_full Quantitative fractographic analysis of impact fracture surfaces of steel R73
title_fullStr Quantitative fractographic analysis of impact fracture surfaces of steel R73
title_full_unstemmed Quantitative fractographic analysis of impact fracture surfaces of steel R73
title_short Quantitative fractographic analysis of impact fracture surfaces of steel R73
title_sort quantitative fractographic analysis of impact fracture surfaces of steel r73
topic Научно-технический раздел
topic_facet Научно-технический раздел
url https://nasplib.isofts.kiev.ua/handle/123456789/48455
work_keys_str_mv AT mrazkoval quantitativefractographicanalysisofimpactfracturesurfacesofsteelr73
AT lauschmannl quantitativefractographicanalysisofimpactfracturesurfacesofsteelr73
AT mrazkoval oličestvennyifraktografičeskiianalizpoverhnosteiudarnogorazrušeniâstalir73
AT lauschmannl oličestvennyifraktografičeskiianalizpoverhnosteiudarnogorazrušeniâstalir73