Comparison of fatigue criteria for combined bending-torsion loading of nitrided and virgin specimens
This work deals with fatigue life of plasma-nitrided and virgin specimens made of a low-alloy high strength steel. Specimens were subjected to an in-phase combined bending-torsion loading. The plasma-nitrided specimens exhibited a significantly improved fatigue resistance. The criterion proposed by...
Saved in:
| Published in: | Проблемы прочности |
|---|---|
| Date: | 2008 |
| Main Authors: | Major, S., Papuga, J., Hornikova, J., Pokluda, J. |
| Format: | Article |
| Language: | English |
| Published: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2008
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/48456 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Comparison of fatigue criteria for combined bending-torsion loading of nitrided and virgin specimens / S. Major, J. Papuga, J. Hornikova, J. Pokluda // Проблемы прочности. — 2008. — № 1. — С. 73-76. — Бібліогр.: 10 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Area and point approaches in fatigue life evaluation under combined bending and torsion loading
by: Karolczuk, A., et al.
Published: (2008)
by: Karolczuk, A., et al.
Published: (2008)
To Solving the Problems of Fatigue under Combined Loading by Static Torsion and Symmetric Cyclic Bending
by: V. N. Pelykh
Published: (2019)
by: V. N. Pelykh
Published: (2019)
Comparison of fatigue characteristics for some selected structural materials under bending and torsion
by: M. Kurek, et al.
Published: (2011)
by: M. Kurek, et al.
Published: (2011)
Comparison of fatigue characteristics for some selected structural materials under bending and torsion
by: Kurek, М., et al.
Published: (2011)
by: Kurek, М., et al.
Published: (2011)
Fatigue crack growth in AlCu4Mg1 under nonproportional bending with torsion loading
by: Rozumek, D., et al.
Published: (2010)
by: Rozumek, D., et al.
Published: (2010)
Fatigue crack growth in AlCu4Mg1 under non-proportional bending with torsion loading
by: D. Rozumek, et al.
Published: (2010)
by: D. Rozumek, et al.
Published: (2010)
Correlation of uniaxial cyclic torsion and tension-compression for low-cycle fatigue
by: T. Lagoda, et al.
Published: (2017)
by: T. Lagoda, et al.
Published: (2017)
Mechanical behavior and optimization of multidirectional laminate specimens under delamination by bending
by: Ahmed Benyahia, A., et al.
Published: (2006)
by: Ahmed Benyahia, A., et al.
Published: (2006)
Fatigue analysis of structures during random loadings
by: Zarka, J., et al.
Published: (2009)
by: Zarka, J., et al.
Published: (2009)
Short Fatigue Crack Behavior of LZ50 Axle Steel under Rotating-Bending Cyclic Loading
by: Yang, B., et al.
Published: (2018)
by: Yang, B., et al.
Published: (2018)
Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting
by: Razavi, S.M.J., et al.
Published: (2017)
by: Razavi, S.M.J., et al.
Published: (2017)
The use of ontological knowledge for multi-criteria comparison of complex information objects
by: Rogushina, J.V., et al.
Published: (2023)
by: Rogushina, J.V., et al.
Published: (2023)
Effect of Preliminary Torsional Strain on Low-Cycle Fatigue of Q345B Structural Steel
by: Hu, X.L., et al.
Published: (2019)
by: Hu, X.L., et al.
Published: (2019)
On numerical realization of torsion and bending problems for prismatic bars with arbitrary cross-sections
by: Ju. Fialko, et al.
Published: (2012)
by: Ju. Fialko, et al.
Published: (2012)
Determination of stress and strain concentrations in the elastic-plastic materials under bending and torsion
by: M. Kurek, et al.
Published: (2011)
by: M. Kurek, et al.
Published: (2011)
Determination of stress and strain concentrations in the elastic-plastic materials under bending and torsion
by: Kurek, M., et al.
Published: (2011)
by: Kurek, M., et al.
Published: (2011)
Bending of axisymmeric loaded thick plates
by: V. P. Revenko
Published: (2019)
by: V. P. Revenko
Published: (2019)
Fatigue properties of notched specimens made of FeP04 steel
by: Rozumek, D., et al.
Published: (2011)
by: Rozumek, D., et al.
Published: (2011)
Methods and specimens for comparative studies of fatigue resistance of parts with multilayer surfacing
by: I. A. Rjabtsev, et al.
Published: (2019)
by: I. A. Rjabtsev, et al.
Published: (2019)
A specimen for fatigue thresholds determination under cyclic transverse shear
by: O. P. Datsyshyn, et al.
Published: (2019)
by: O. P. Datsyshyn, et al.
Published: (2019)
Fatigue properties of notched specimens made of FeP04 steel
by: D. Rozumek, et al.
Published: (2011)
by: D. Rozumek, et al.
Published: (2011)
To Solution of the Fatigue Problems under Two-Axial Combined Symmetric and Asymmetric Cyclic Loading
by: A. D. Pogrebnjak
Published: (2016)
by: A. D. Pogrebnjak
Published: (2016)
Fatigue life of specimens from 40KH steel after wear-resistant
by: V. V. Knysh, et al.
Published: (2021)
by: V. V. Knysh, et al.
Published: (2021)
The change of the coercive force under fatigue testing of 40X steel specimens
by: Вакуленко, К. В., et al.
Published: (2015)
by: Вакуленко, К. В., et al.
Published: (2015)
The change of the coercive force under fatigue testing of 40X steel specimens
by: Вакуленко, К. В., et al.
Published: (2015)
by: Вакуленко, К. В., et al.
Published: (2015)
The change of the coercive force under fatigue testing of 40X steel specimens
by: K. V. Vakulenko, et al.
Published: (2015)
by: K. V. Vakulenko, et al.
Published: (2015)
Evolution of torsion and bending moments in a frame support profile due to its plastic deformation
by: V. V. Nazymko, et al.
Published: (2018)
by: V. V. Nazymko, et al.
Published: (2018)
Study of the impact of crack resistance parameters on the critical load of a specimen with a mode I crack under three-point bending in the framework of the cohesive zone model
by: V. L. Bogdanov, et al.
Published: (2024)
by: V. L. Bogdanov, et al.
Published: (2024)
Elastic properties of B19’ structure of NiTi alloy under uniaxial and hydrostatic loading from first principles
by: Sestak, P., et al.
Published: (2008)
by: Sestak, P., et al.
Published: (2008)
Modeling and Numerical Simulation of Fatigue Crack Growth in Cracked Specimens Containing Material Discontinuities
by: Jameel, Azher, et al.
Published: (2016)
by: Jameel, Azher, et al.
Published: (2016)
Experimental Analysis of Behavior and Damage of Sandwich Composite Materials in Three-Point Bending. Part 2. Fatigue Test Results and Damage Mechanisms
by: Bezazi, A., et al.
Published: (2009)
by: Bezazi, A., et al.
Published: (2009)
Preface
by: Pokluda, J.
Published: (2008)
by: Pokluda, J.
Published: (2008)
Numerical Simulation of Flexible Riser under Torsion
by: Liu, M.S., et al.
Published: (2017)
by: Liu, M.S., et al.
Published: (2017)
Influence of notch radius on fatigue crack propagation in beam specimens of 2017A-T4 alloy
by: D. Rozumek, et al.
Published: (2017)
by: D. Rozumek, et al.
Published: (2017)
Fatigue crack growth resistance of steels of long-term exploited steam pipeline bends
by: O. P. Ostash, et al.
Published: (2012)
by: O. P. Ostash, et al.
Published: (2012)
Influence of nitriding on the fatigue behavior and fracture micromechanisms of nodular cast Iron
by: Konecna, R., et al.
Published: (2008)
by: Konecna, R., et al.
Published: (2008)
The influence of ion nitriding modes on fretting-fatigue of 40X steel
by: P. V. Kaplun, et al.
Published: (2018)
by: P. V. Kaplun, et al.
Published: (2018)
Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
by: Zapletal, J., et al.
Published: (2008)
by: Zapletal, J., et al.
Published: (2008)
Lateral Torsional Buckling of an Eccentrically Loaded Channel Section Beam
by: Dahmani, L., et al.
Published: (2015)
by: Dahmani, L., et al.
Published: (2015)
Determination of tribological properties of multilayer coatings based on nitrides
by: J. Brezinová, et al.
Published: (2022)
by: J. Brezinová, et al.
Published: (2022)
Similar Items
-
Area and point approaches in fatigue life evaluation under combined bending and torsion loading
by: Karolczuk, A., et al.
Published: (2008) -
To Solving the Problems of Fatigue under Combined Loading by Static Torsion and Symmetric Cyclic Bending
by: V. N. Pelykh
Published: (2019) -
Comparison of fatigue characteristics for some selected structural materials under bending and torsion
by: M. Kurek, et al.
Published: (2011) -
Comparison of fatigue characteristics for some selected structural materials under bending and torsion
by: Kurek, М., et al.
Published: (2011) -
Fatigue crack growth in AlCu4Mg1 under nonproportional bending with torsion loading
by: Rozumek, D., et al.
Published: (2010)