Evaluation of the limit state and cyclic life of structural materials under thermal fatigue
The relationship between the cyclic life and reduced stress in half-cycles of heating (compression) has been established, as well as the parameters defining the transition from the quasi-static to fatigue fracture mode and their threshold values. An approach has been proposed for the evaluation of c...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2009 |
| 1. Verfasser: | Gopkalo, A.P. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2009
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/48470 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Evaluation of the limit state and cyclic life of structural materials under thermal fatigue / A.P. Gopkalo // Проблемы прочности. — 2009. — № 1. — С. 95-104. — Бібліогр.: 12 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
von: Zhao, L.H., et al.
Veröffentlicht: (2018)
von: Zhao, L.H., et al.
Veröffentlicht: (2018)
Area and point approaches in fatigue life evaluation under combined bending and torsion loading
von: Karolczuk, A., et al.
Veröffentlicht: (2008)
von: Karolczuk, A., et al.
Veröffentlicht: (2008)
Fatigue Life Prediction of Welded Box Structures
von: Zedira, H., et al.
Veröffentlicht: (2004)
von: Zedira, H., et al.
Veröffentlicht: (2004)
Thermal Fatigue Life Prediction of Ventilation Air Methane Oxidation Bed
von: Liu, Y.Q., et al.
Veröffentlicht: (2016)
von: Liu, Y.Q., et al.
Veröffentlicht: (2016)
Crack initiation and endurance limit of hard steels under multiaxial cyclic loads
von: Bomas, H., et al.
Veröffentlicht: (2008)
von: Bomas, H., et al.
Veröffentlicht: (2008)
Short Fatigue Crack Behavior of LZ50 Axle Steel under Rotating-Bending Cyclic Loading
von: Yang, B., et al.
Veröffentlicht: (2018)
von: Yang, B., et al.
Veröffentlicht: (2018)
Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
von: Zapletal, J., et al.
Veröffentlicht: (2008)
von: Zapletal, J., et al.
Veröffentlicht: (2008)
Study on Fatigue Life of Plow Bit under Different Planning Parameters
von: Zhang, Q., et al.
Veröffentlicht: (2014)
von: Zhang, Q., et al.
Veröffentlicht: (2014)
A Method of Virtual Design of the Fatigue Life of a Dynamic Structure
von: Zhao, W., et al.
Veröffentlicht: (2015)
von: Zhao, W., et al.
Veröffentlicht: (2015)
Residual Strains of Filter Materials Reinforced with Grid Inclusions under Cyclic Loading
von: Lin, Y.L., et al.
Veröffentlicht: (2015)
von: Lin, Y.L., et al.
Veröffentlicht: (2015)
Improved Method of Fatigue Life Assessment for TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)
von: Feng, R.C., et al.
Veröffentlicht: (2014)
Fatigue life of welded joints according to energy criteria in the critical plane
von: Lagoda, T.
Veröffentlicht: (2006)
von: Lagoda, T.
Veröffentlicht: (2006)
Cyclic cracking resistance of brittle materials in compressive loading
von: Lanin, A.G.
Veröffentlicht: (2009)
von: Lanin, A.G.
Veröffentlicht: (2009)
Fatigue of NPP Components and Piping under Service Conditions
von: Filatov, V.M.
Veröffentlicht: (2004)
von: Filatov, V.M.
Veröffentlicht: (2004)
Accelerated Life Test and FEM Simulation-Based Fatigue Analysis of an Aluminum Alloy Push Rod
von: Xua, L., et al.
Veröffentlicht: (2019)
von: Xua, L., et al.
Veröffentlicht: (2019)
Theoretical-experimental model for predicting crack growth rate in structural alloys under combined action of fatigue and creep
von: Pokrovskii, V.V., et al.
Veröffentlicht: (2009)
von: Pokrovskii, V.V., et al.
Veröffentlicht: (2009)
Evolution of discrete phenomena of inelasticity in aluminum alloy under cyclic loading
von: Pisarenko, G.G., et al.
Veröffentlicht: (2009)
von: Pisarenko, G.G., et al.
Veröffentlicht: (2009)
Elastoplastic Damage Model for Concrete under Triaxial Compression and Reversed Cyclic Loading
von: Zhang, J., et al.
Veröffentlicht: (2018)
von: Zhang, J., et al.
Veröffentlicht: (2018)
Thermal Fatigue Resistance of Bionic Compacted Graphite Cast Iron Treated with the Twice Laser Process in Water
von: Liu, Y., et al.
Veröffentlicht: (2015)
von: Liu, Y., et al.
Veröffentlicht: (2015)
Modeling and Numerical Simulation of Fatigue Crack Growth in Cracked Specimens Containing Material Discontinuities
von: Jameel, Azher, et al.
Veröffentlicht: (2016)
von: Jameel, Azher, et al.
Veröffentlicht: (2016)
Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
von: Haq, A.U., et al.
Veröffentlicht: (2018)
von: Haq, A.U., et al.
Veröffentlicht: (2018)
Notch Effect on the Fatigue Behavior of a Hot Dip Galvanized Structural Steel
von: Berto, F., et al.
Veröffentlicht: (2015)
von: Berto, F., et al.
Veröffentlicht: (2015)
Size effect in contact fatigue
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
Theoretical and Experimental Investigation of the Dissipated and Stored Energy Ratio in Iron under Quasi-Static and Cyclic Loading
von: Plekhov, O., et al.
Veröffentlicht: (2008)
von: Plekhov, O., et al.
Veröffentlicht: (2008)
Modeling of Damage Interaction in Fatigue Relaxation for Long-Term Life Prediction. Case of Alloy 800 Grade 2 Study at 550°C
von: Gharad, A. El, et al.
Veröffentlicht: (2002)
von: Gharad, A. El, et al.
Veröffentlicht: (2002)
High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2017)
von: Hu, X.L., et al.
Veröffentlicht: (2017)
Wear-fatigue test methods and their significance
von: Bahdanovich, A.V., et al.
Veröffentlicht: (2009)
von: Bahdanovich, A.V., et al.
Veröffentlicht: (2009)
Effect of Preliminary Torsional Strain on Low-Cycle Fatigue of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2019)
von: Hu, X.L., et al.
Veröffentlicht: (2019)
Study of Mechanical Degradation of 9Cr-1Mo-V-Nb Steel under Creep-Fatigue Interaction Conditions
von: Kim, C.S.
Veröffentlicht: (2017)
von: Kim, C.S.
Veröffentlicht: (2017)
A model of fatigue crack propagation in metals
von: Yakovleva, T.Yu., et al.
Veröffentlicht: (2009)
von: Yakovleva, T.Yu., et al.
Veröffentlicht: (2009)
Experimental Analysis of Behavior and Damage of Sandwich Composite Materials in Three-Point Bending. Part 2. Fatigue Test Results and Damage Mechanisms
von: Bezazi, A., et al.
Veröffentlicht: (2009)
von: Bezazi, A., et al.
Veröffentlicht: (2009)
An Improved Projection Method for Determination of Fatigue Parameters of Metal Structures Based on Spherical Direction Cosine Group Construction
von: Yang, B., et al.
Veröffentlicht: (2016)
von: Yang, B., et al.
Veröffentlicht: (2016)
Fatigue Fracture Analysis of Composite Plates with an Elliptical Hole
von: Kielbasa, B., et al.
Veröffentlicht: (2017)
von: Kielbasa, B., et al.
Veröffentlicht: (2017)
Fatigue Damage Analysis of an Asphalt Mixture Based on Pseudostiffness
von: Wang, X.R., et al.
Veröffentlicht: (2018)
von: Wang, X.R., et al.
Veröffentlicht: (2018)
Recent developments to improve the quality and economics of testing for fatigue and fracture
von: Sunder, R.
Veröffentlicht: (2009)
von: Sunder, R.
Veröffentlicht: (2009)
In situ scanning electron microscopy study of fatigue crack propagation
von: Jacobsson, L., et al.
Veröffentlicht: (2008)
von: Jacobsson, L., et al.
Veröffentlicht: (2008)
Flexural Fatigue Behavior of Cross-Ply Laminates: An Experimental Approach
von: Bezazi, A.R., et al.
Veröffentlicht: (2003)
von: Bezazi, A.R., et al.
Veröffentlicht: (2003)
Method of the shortcut estimation of rails reliability by the fatigue strength criterion
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
Influence of Temperature on Fatigue Crack Propagation in TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)
von: Feng, R.C., et al.
Veröffentlicht: (2014)
Effect of Forging on Cyclic Hardening Behavior of CW 614 Brass Alloy
von: Mnif, R., et al.
Veröffentlicht: (2011)
von: Mnif, R., et al.
Veröffentlicht: (2011)
Ähnliche Einträge
-
Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
von: Zhao, L.H., et al.
Veröffentlicht: (2018) -
Area and point approaches in fatigue life evaluation under combined bending and torsion loading
von: Karolczuk, A., et al.
Veröffentlicht: (2008) -
Fatigue Life Prediction of Welded Box Structures
von: Zedira, H., et al.
Veröffentlicht: (2004) -
Thermal Fatigue Life Prediction of Ventilation Air Methane Oxidation Bed
von: Liu, Y.Q., et al.
Veröffentlicht: (2016) -
Crack initiation and endurance limit of hard steels under multiaxial cyclic loads
von: Bomas, H., et al.
Veröffentlicht: (2008)