Method of the shortcut estimation of rails reliability by the fatigue strength criterion
The diagram of damage of structural steels under bending and contact loading has been constructed. The criterion of the critical state of steels is proposed, which corresponds to the formation of incipient surface cracks in the rolling friction zone. The methods of shortcut estimation of the damaged...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2009 |
| Hauptverfasser: | Sosnovskii, L.A., Makhutov, N.A., Matviatsov, V.I., Kebikov, A.A. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2009
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/48471 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Method of the shortcut estimation of rails reliability by the fatigue strength criterion / L.A. Sosnovskii, N.A. Makhutov, V.I. Matviatsov, A.A. Kebikov // Проблемы прочности. — 2009. — № 1. — С. 88-94. — Бібліогр.:8 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Size effect in contact fatigue
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
von: Zapletal, J., et al.
Veröffentlicht: (2008)
von: Zapletal, J., et al.
Veröffentlicht: (2008)
Fatigue Limits of Steels and Stress Gradient
von: Troshchenko, V.T., et al.
Veröffentlicht: (2011)
von: Troshchenko, V.T., et al.
Veröffentlicht: (2011)
Application of the Point Stress Criterion to Assess the Bond Strength of a Single-Lap Joint
von: Sajikumar, K.S., et al.
Veröffentlicht: (2014)
von: Sajikumar, K.S., et al.
Veröffentlicht: (2014)
Service loading test as a source for the fatigue curve parameters’ estimation
von: Gadolina, I.V., et al.
Veröffentlicht: (2009)
von: Gadolina, I.V., et al.
Veröffentlicht: (2009)
Two-parametrical fracture criterion
von: Ziliukas, A.
Veröffentlicht: (2006)
von: Ziliukas, A.
Veröffentlicht: (2006)
Quantification of the Influence of Residual Stresses on Fatigue Strength of Al-Alloy Welded Joints by Means of the Local Strain Energy Density Approach
von: Ferro, P., et al.
Veröffentlicht: (2016)
von: Ferro, P., et al.
Veröffentlicht: (2016)
Wear-fatigue test methods and their significance
von: Bahdanovich, A.V., et al.
Veröffentlicht: (2009)
von: Bahdanovich, A.V., et al.
Veröffentlicht: (2009)
Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
von: Haq, A.U., et al.
Veröffentlicht: (2018)
von: Haq, A.U., et al.
Veröffentlicht: (2018)
Fatigue Strength and Life Prediction of a MAR-M247 Nickel-Base Superalloy Gas Turbine Blade with Multiple Carbide Inclusions
von: Lin, H., et al.
Veröffentlicht: (2019)
von: Lin, H., et al.
Veröffentlicht: (2019)
Theoretical and Experimental Evaluation of Performance of a CNG Engine and the Pistons Fatigue Lives Employing Modified Fatigue Criteria
von: Shariyat, M., et al.
Veröffentlicht: (2012)
von: Shariyat, M., et al.
Veröffentlicht: (2012)
In-service fatigue fracture mechanisms in covered disks of a TV3-117VK helicopter turbine engine
von: Shanyavskii, A.A., et al.
Veröffentlicht: (2008)
von: Shanyavskii, A.A., et al.
Veröffentlicht: (2008)
Formalized design and synthesis of parallel programs for videographic shortcuts
von: Doroshenko, A.Yu., et al.
Veröffentlicht: (2025)
von: Doroshenko, A.Yu., et al.
Veröffentlicht: (2025)
On local fatigue life and fatigue strength
von: V. L. Busov, et al.
Veröffentlicht: (2010)
von: V. L. Busov, et al.
Veröffentlicht: (2010)
Fatigue Life Prediction of Welded Box Structures
von: Zedira, H., et al.
Veröffentlicht: (2004)
von: Zedira, H., et al.
Veröffentlicht: (2004)
An Algorithm for Estimating Minimum Strength of Thin-Walled Structures to Resist Elastic Buckling under Pressure
von: Ishinabe, M., et al.
Veröffentlicht: (2012)
von: Ishinabe, M., et al.
Veröffentlicht: (2012)
Fatigue Fracture Analysis of Composite Plates with an Elliptical Hole
von: Kielbasa, B., et al.
Veröffentlicht: (2017)
von: Kielbasa, B., et al.
Veröffentlicht: (2017)
Flexural Fatigue Behavior of Cross-Ply Laminates: An Experimental Approach
von: Bezazi, A.R., et al.
Veröffentlicht: (2003)
von: Bezazi, A.R., et al.
Veröffentlicht: (2003)
The Structural Strength of Glass: Hidden Damage
von: Veera, F.A., et al.
Veröffentlicht: (2011)
von: Veera, F.A., et al.
Veröffentlicht: (2011)
Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures
von: Arsić, D., et al.
Veröffentlicht: (2016)
von: Arsić, D., et al.
Veröffentlicht: (2016)
A model of fatigue crack propagation in metals
von: Yakovleva, T.Yu., et al.
Veröffentlicht: (2009)
von: Yakovleva, T.Yu., et al.
Veröffentlicht: (2009)
Evaluation of the limit state and cyclic life of structural materials under thermal fatigue
von: Gopkalo, A.P.
Veröffentlicht: (2009)
von: Gopkalo, A.P.
Veröffentlicht: (2009)
Fracture Criterion for the Tensile Test of 7075 Aluminum Alloy
von: Chen, D.C., et al.
Veröffentlicht: (2015)
von: Chen, D.C., et al.
Veröffentlicht: (2015)
Micromechanical Coupled Study of Crack Growth Initiation Criterion in Pressure Vessel Steel
von: Rakin, M., et al.
Veröffentlicht: (2004)
von: Rakin, M., et al.
Veröffentlicht: (2004)
Probabilistic Fatigue Crack Initiation and Propagation Fields Using the Strain Energy Density
von: Correia, J.A.F.O., et al.
Veröffentlicht: (2018)
von: Correia, J.A.F.O., et al.
Veröffentlicht: (2018)
Fatigue of NPP Components and Piping under Service Conditions
von: Filatov, V.M.
Veröffentlicht: (2004)
von: Filatov, V.M.
Veröffentlicht: (2004)
Fatigue Damage Analysis of an Asphalt Mixture Based on Pseudostiffness
von: Wang, X.R., et al.
Veröffentlicht: (2018)
von: Wang, X.R., et al.
Veröffentlicht: (2018)
Area and point approaches in fatigue life evaluation under combined bending and torsion loading
von: Karolczuk, A., et al.
Veröffentlicht: (2008)
von: Karolczuk, A., et al.
Veröffentlicht: (2008)
Modeling and Numerical Simulation of Fatigue Crack Growth in Cracked Specimens Containing Material Discontinuities
von: Jameel, Azher, et al.
Veröffentlicht: (2016)
von: Jameel, Azher, et al.
Veröffentlicht: (2016)
Application of the Micropolar Theory to the Strength Analysis of Bioceramic Materials for Bone Reconstruction
von: Eremeyev, V.A., et al.
Veröffentlicht: (2016)
von: Eremeyev, V.A., et al.
Veröffentlicht: (2016)
Method for low-cycle fatigue life assessment of metallic materials under multiaxial loading
von: Shukaev, S., et al.
Veröffentlicht: (2008)
von: Shukaev, S., et al.
Veröffentlicht: (2008)
In situ scanning electron microscopy study of fatigue crack propagation
von: Jacobsson, L., et al.
Veröffentlicht: (2008)
von: Jacobsson, L., et al.
Veröffentlicht: (2008)
Recent developments to improve the quality and economics of testing for fatigue and fracture
von: Sunder, R.
Veröffentlicht: (2009)
von: Sunder, R.
Veröffentlicht: (2009)
Influence of Temperature on Fatigue Crack Propagation in TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)
von: Feng, R.C., et al.
Veröffentlicht: (2014)
Improved Method of Fatigue Life Assessment for TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)
von: Feng, R.C., et al.
Veröffentlicht: (2014)
Pulse Current Treatment Effect on the Strength of Reinforcing Steel and Its Weld Joint under Impact Loading
von: Kruszka, L., et al.
Veröffentlicht: (2009)
von: Kruszka, L., et al.
Veröffentlicht: (2009)
Low-cycle fatigue calculation of gas turbine engine disks under flight cycle conditions
von: Karimbaev, K.D., et al.
Veröffentlicht: (2009)
von: Karimbaev, K.D., et al.
Veröffentlicht: (2009)
Nonlinearity of the Rock Joint Shear Strength
von: Wei, Y.F., et al.
Veröffentlicht: (2015)
von: Wei, Y.F., et al.
Veröffentlicht: (2015)
Fracture and Fatigue Analysis for a Cracked Carabiner Using 3D Finite Element Simulations
von: Aliha, M.R.M., et al.
Veröffentlicht: (2015)
von: Aliha, M.R.M., et al.
Veröffentlicht: (2015)
Influence of Nanoalumina Particles on the Static and High-Cycle Fatigue Properties of Peel-Loaded Adhesive-Bonded Joints
von: Kubita, A., et al.
Veröffentlicht: (2016)
von: Kubita, A., et al.
Veröffentlicht: (2016)
Ähnliche Einträge
-
Size effect in contact fatigue
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009) -
Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
von: Zapletal, J., et al.
Veröffentlicht: (2008) -
Fatigue Limits of Steels and Stress Gradient
von: Troshchenko, V.T., et al.
Veröffentlicht: (2011) -
Application of the Point Stress Criterion to Assess the Bond Strength of a Single-Lap Joint
von: Sajikumar, K.S., et al.
Veröffentlicht: (2014) -
Service loading test as a source for the fatigue curve parameters’ estimation
von: Gadolina, I.V., et al.
Veröffentlicht: (2009)