Deformation and fracture of high-temperature steels at different temperatures and loading rates
Charpy impact tests were conducted at different temperatures and loading rates. Temperature dependences of the crack initiation and propagation energies were determinedfor carbon steel 45, steels St. 3 and 15Kh2NMFA from the load-time curves obtained with due account of the impact test results. The...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2009 |
| Hauptverfasser: | Kondryakov, E.A., Lenzion, S.V., Kharchenko, V.V. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2009
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/48479 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Deformation and fracture of high-temperature steels at different temperatures and loading rates / E.A. Kondryakov, S.V. Lenzion, V.V. Kharchenko // Проблемы прочности. — 2009. — № 1. — С. 29-34. — Бібліогр.: 11 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Coupled Effects of Strain Rate and Temperature on Deformation Twinning in Cu-Zn Alloy
von: Zhou, P., et al.
Veröffentlicht: (2016)
von: Zhou, P., et al.
Veröffentlicht: (2016)
Effects of Lattice Relaxation and Limiting Shear Stress of fcc Metals at High-Rate Deformation
von: Kamyshenko, V.V., et al.
Veröffentlicht: (2002)
von: Kamyshenko, V.V., et al.
Veröffentlicht: (2002)
Mechanical properties and fracture behavior of high-strength steels
von: Musalek, R., et al.
Veröffentlicht: (2008)
von: Musalek, R., et al.
Veröffentlicht: (2008)
Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures
von: Arsić, D., et al.
Veröffentlicht: (2016)
von: Arsić, D., et al.
Veröffentlicht: (2016)
Strength Improvement of Ferritic/Martensitic T91 Steel by Cross Wedge Rolling at Different Austenitizing Temperatures
von: He, T., et al.
Veröffentlicht: (2017)
von: He, T., et al.
Veröffentlicht: (2017)
Localization of plastic deformation and fracture in aluminum polycrystals
von: Zarikovskaya, N.V., et al.
Veröffentlicht: (2008)
von: Zarikovskaya, N.V., et al.
Veröffentlicht: (2008)
Method of Prevention of Fracture of Welded Metal Structural Elements Subjected to Single Dynamic Loads
von: Kir’yan, V.I., et al.
Veröffentlicht: (2002)
von: Kir’yan, V.I., et al.
Veröffentlicht: (2002)
Fracture of Polymethylmethacrylate under Pulse Loading Conditions
von: Atroshenko, S.A., et al.
Veröffentlicht: (2002)
von: Atroshenko, S.A., et al.
Veröffentlicht: (2002)
Cryogenic Fracture Behavior of Metastable Austenitic Stainless Steel in a High Magnetic Field
von: Shindo, Y., et al.
Veröffentlicht: (2010)
von: Shindo, Y., et al.
Veröffentlicht: (2010)
Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling
von: Guan, B., et al.
Veröffentlicht: (2018)
von: Guan, B., et al.
Veröffentlicht: (2018)
Deformability Behavior of St3 Steel Used in the Profiles of High-Voltage Poles
von: Jutas, A., et al.
Veröffentlicht: (2018)
von: Jutas, A., et al.
Veröffentlicht: (2018)
Lateral Torsional Buckling Response of Steel Beam with Different Boundary Conditions and Loading
von: Dahmani, L., et al.
Veröffentlicht: (2014)
von: Dahmani, L., et al.
Veröffentlicht: (2014)
Construction and Verification of the Constitutive Model of Pure Copper Deformation at Elevated Temperatures
von: Huang, S.H., et al.
Veröffentlicht: (2019)
von: Huang, S.H., et al.
Veröffentlicht: (2019)
Research on Cutting-Temperature Field and Distribution of Heat Rates among a Workpiece, Cutter, and Chip for High-Speed Cutting Based on Analytical and Numerical Methods
von: An, H.P., et al.
Veröffentlicht: (2014)
von: An, H.P., et al.
Veröffentlicht: (2014)
Fracture Process in ± θ Laminates Subjected to Mode II Loading
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2002)
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2002)
Investigation of Fracture of Spheroplastics under Static and Dynamic Loading Conditions
von: Atroshenko, S.A., et al.
Veröffentlicht: (2002)
von: Atroshenko, S.A., et al.
Veröffentlicht: (2002)
Microstructural and fracture analysis of aged cast duplex steel
von: Dyja, D., et al.
Veröffentlicht: (2008)
von: Dyja, D., et al.
Veröffentlicht: (2008)
Correlation dependences between short-term/long-term static strength characteristics and creep resistance of tungsten at high temperatures
von: Borisenko, V.A., et al.
Veröffentlicht: (2005)
von: Borisenko, V.A., et al.
Veröffentlicht: (2005)
Influence of a Strain Rate and Temperature on the Crack Tip Stress and Microstructure Evolution of Monocrystalline Nickel: a Molecular Dynamics Simulation
von: Wu, W.P., et al.
Veröffentlicht: (2014)
von: Wu, W.P., et al.
Veröffentlicht: (2014)
Fracture Toughness and Crack Resistance of Steam Pipeline Steel in Initial and Used States
von: Zrilic, M., et al.
Veröffentlicht: (2004)
von: Zrilic, M., et al.
Veröffentlicht: (2004)
Analysis of Warm Prestressing Effect on Fracture Toughness of Reactor Pressure Vessel Steels
von: Beleznai, R., et al.
Veröffentlicht: (2010)
von: Beleznai, R., et al.
Veröffentlicht: (2010)
Fracture resistance of ceramics: edge fracture method
von: Gogotsi, G.A., et al.
Veröffentlicht: (2005)
von: Gogotsi, G.A., et al.
Veröffentlicht: (2005)
Relaxation processes for high-frequency mechanical loading of metals deformed at low temperatures
von: O. I. Volchok, et al.
Veröffentlicht: (2017)
von: O. I. Volchok, et al.
Veröffentlicht: (2017)
Influence of H₂S Corrosion on Tensile Properties and Fracture Toughness of X80 Pipeline Steel
von: Gu, L., et al.
Veröffentlicht: (2019)
von: Gu, L., et al.
Veröffentlicht: (2019)
Damage and Fracture of VT22 Titanium Alloy in Static Tension after the Application of Additional Pulse Loading
von: Марущак, П.О., et al.
Veröffentlicht: (2017)
von: Марущак, П.О., et al.
Veröffentlicht: (2017)
Evaluation of the Test Temperature Effect on Failure Mechanisms and Notched Impact Strength Characteristics of Ultra-Hard Low Alloy Steels
von: Binar, T., et al.
Veröffentlicht: (2011)
von: Binar, T., et al.
Veröffentlicht: (2011)
Effect of Impact Load on Dynamic Buckling of Steel Lattice Arch
von: Liu, M.S., et al.
Veröffentlicht: (2017)
von: Liu, M.S., et al.
Veröffentlicht: (2017)
Fracture Investigation of Wood under Mixed Mode I/II Loading Based on Maximum Shear Stress Criterion
von: Fakoor, M., et al.
Veröffentlicht: (2013)
von: Fakoor, M., et al.
Veröffentlicht: (2013)
On Standards for Mechanical Testing of Materials at Cryogenic Temperatures
von: Novogrudskii, L.S., et al.
Veröffentlicht: (2010)
von: Novogrudskii, L.S., et al.
Veröffentlicht: (2010)
Investigation of Fracturing Process of Rock-Like Brazilian Disks Containing Three Parallel Cracks under Compressive Line Loading
von: Haeri, H., et al.
Veröffentlicht: (2014)
von: Haeri, H., et al.
Veröffentlicht: (2014)
Investigation of Plastic Behavior of Alloyed Steel Deformed during Martensitic Transformation
von: Kandrotaitė-Janutienė, R., et al.
Veröffentlicht: (2016)
von: Kandrotaitė-Janutienė, R., et al.
Veröffentlicht: (2016)
Shear Behavior of Non-Persistent Joint under High Normal Load
von: Sarfarazi, V., et al.
Veröffentlicht: (2017)
von: Sarfarazi, V., et al.
Veröffentlicht: (2017)
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels
von: Kaščák, L., et al.
Veröffentlicht: (2016)
von: Kaščák, L., et al.
Veröffentlicht: (2016)
Crack initiation and endurance limit of hard steels under multiaxial cyclic loads
von: Bomas, H., et al.
Veröffentlicht: (2008)
von: Bomas, H., et al.
Veröffentlicht: (2008)
Radiation-Induced Embrittlement of WWER-440 Reactor Pressure Vessel Steel under Loading
von: Grinik, E.U., et al.
Veröffentlicht: (2003)
von: Grinik, E.U., et al.
Veröffentlicht: (2003)
Resistance to deformation and fracture of 35Kh3NM steel under conditions of shock loading
von: Gluzman, V.D., et al.
Veröffentlicht: (1985)
von: Gluzman, V.D., et al.
Veröffentlicht: (1985)
Influence of carbides morphology on fracture toughness of cast steel G200CrMoNi4-3-3
von: Stradomski, Z., et al.
Veröffentlicht: (2008)
von: Stradomski, Z., et al.
Veröffentlicht: (2008)
Flexural Fracture Toughness and First-Crack Strength Tests of Steel Fiber-Silica Fume Concrete and Its Engineering Applications
von: Zhang, J.P., et al.
Veröffentlicht: (2018)
von: Zhang, J.P., et al.
Veröffentlicht: (2018)
Change in the ductility characteristics of austenitic steels during deformation at different rates
von: Shinkarenko, E.T.
Veröffentlicht: (1985)
von: Shinkarenko, E.T.
Veröffentlicht: (1985)
Fracture toughness of the high-strength steels within the ductile to cleavage transition temperature range – Master Curves
von: A. Neimitz, et al.
Veröffentlicht: (2017)
von: A. Neimitz, et al.
Veröffentlicht: (2017)
Ähnliche Einträge
-
Coupled Effects of Strain Rate and Temperature on Deformation Twinning in Cu-Zn Alloy
von: Zhou, P., et al.
Veröffentlicht: (2016) -
Effects of Lattice Relaxation and Limiting Shear Stress of fcc Metals at High-Rate Deformation
von: Kamyshenko, V.V., et al.
Veröffentlicht: (2002) -
Mechanical properties and fracture behavior of high-strength steels
von: Musalek, R., et al.
Veröffentlicht: (2008) -
Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures
von: Arsić, D., et al.
Veröffentlicht: (2016) -
Strength Improvement of Ferritic/Martensitic T91 Steel by Cross Wedge Rolling at Different Austenitizing Temperatures
von: He, T., et al.
Veröffentlicht: (2017)