Аннотации
Saved in:
| Published in: | Фундаментальные и прикладные проблемы черной металлургии |
|---|---|
| Date: | 2009 |
| Format: | Article |
| Language: | Russian |
| Published: |
Інститут чорної металургії ім. З.І. Некрасова НАН України
2009
|
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/63156 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Аннотации // Фундаментальные и прикладные проблемы черной металлургии: Сб. научн. тр. — Дніпропетровськ.: ІЧМ НАН України, 2009. — Вип. 19. — С. 413-422. — рос. |
Institution
Digital Library of Periodicals of National Academy of Sciences of Ukraine| _version_ | 1859634185222750208 |
|---|---|
| citation_txt | Аннотации // Фундаментальные и прикладные проблемы черной металлургии: Сб. научн. тр. — Дніпропетровськ.: ІЧМ НАН України, 2009. — Вип. 19. — С. 413-422. — рос. |
| collection | DSpace DC |
| container_title | Фундаментальные и прикладные проблемы черной металлургии |
| first_indexed | 2025-12-07T13:14:29Z |
| format | Article |
| fulltext |
413
Abstracts
V.I.Bolshakov, L.G.Tuboltsev
Condition and prospects of development of iron and steel industry of Ukraine
in the conditions of crisis
Objective of this research is the estimation of prospects of development of
metallurgical manufacture in the conditions of world financial crisis. The carried out
analysis of tendencies of development of a world iron and steel industry of Ukraine has
given the opportunity to reveal perspective directions of scientific researches for
development of domestic metallurgy. Arrangements for maintenance of effective work
of a metallurgical complex are offered.
V.I.Bolshakov, S.M. Zhuchkov
The analysis of work results of Z.I.Nekrasov Iron & Steel Institute of National
Academy of sciences of Ukraine in 2008
Research objective is the analysis of scientific and personnel possibilities of Iron &
Steel Institute of National Academy of Sciences of Ukraine for holding fundamental and
applied researches in the field of iron and steel industry. Results of researches have
shown that the Institute has material, financial and personnel possibilities for qualitative
performance of scientific researches. Ways and prospects for realisation of scientific
potential of Institute are shown.
V.I.Bolshakov, N.M.Mozharenko, I.G.Muraveva, G.N.Golubyh
Technological features of the blowout of blast furnaces at blowing-down on the
capital repairs
Research objective is working out of technological parameters of the blast furnaces
work providing their accident-free blow-out at blowing-down on capital repairs. It is
shown, that the furnace blow-out should be carefully prepared according to requirements
of the technological instruction. Observance of the developed parameters of blast
furnaces work is recommended at blow-out on all blast furnaces of Ukraine that will
provide industrial safety and prolongation of furnaces service life.
D.N.Togobitskaja, A.F.Hamhotko, N.A.Gladkov, N.E.Hodotova
Developing of models for forecasting of modular transformations iron ore
materials in a blast furnace
The purpose of present research is developing of the complex approach for an all-
round estimation of iron ore quality and the analysis of the offered variant for
developing predictive models for softening and melting of the agglomerates, pellets and
ores. Using the data received by the standard technique, performed analytical
generalisation of information about phase transformations of iron ore materials in the
original conditions and recovered conditions of blast furnace smelting. The offered
physical and chemical models can be used to predict the softening and melting of charge
materials temperatures.
V.I.Bolshakov, V.V.Lebed
Modern control condition of gas-distribution in blast furnace
The purpose of present research is analysis and developing of scientific and
technical perspective directions for improvement of various control devices of
distribution of gases in blast furnaces. It shown, that for an informative and reliable
414
control of gas distribution it is appropriate to equip the blast furnace with mobile and
stationary gas-tube sondes under the charge surface. The perspective directions of
introductions in the field of automation for increase to improve management of blast
furnace smelting are brought.
I.G.Muraveva, J.S.Semenov, F.M.Shutylev, E.I.Shumelchik, S.T.Shuliko,
J.A.Bogachev
Estimation method of displaceable volume of coke during unloading on him
the iron-containing components of charge
The purpose of present research is the developing of estimation method of the
displaceable volume of coke during unloading on him the iron-containing components
of charge in a blast furnace. It is established, that the volume of displaceable coke is
defined as the mass landed on him the iron-containing components and depends on the
mass of the unloaded coke. It is shown, that the developed method can be used as part
of an information system about the level of charge, received by radio-locating profile-
measuring device, and as part of mathematical model of radial distribution charge
materials on blast-furnace top.
A.S.Nesterov, V.I.Bolshakov, N.M.Mozharenko, I.P.Lusenko, I.V.Loginov,
V.J.Kuchin
The research of processes of melt filtration through the coke nozzle in the blast
furnace smelting at coal dust fuel application
The purpose of the research was studying of input influence of finely dispersed
partially burnt grains of coke dust fuel on viscosity characteristics of homogeneous slag
melt in a blast furnace. The experiments were held on laboratory liquid viskosimeter
using the capillary method. It is shown, that during coke dust fuel (CDF) application, the
defining link of efficiency of replacement of the coke part of CDF is stability of coke
quality during high temperatures and rational distribution of iron-ore materials on blast
furnace section. The results of the work can be used at realisation of charging process of
coke dust fuel in a blast furnace.
D.N.Togobitskaya, A.I.Belkova, A.F.Hamhotko, D.A.Stepanenko, P.I.Otorvin,
S.V.Nyn
The experience of creation and introduction of the control system of the slag
regime of the blast furnace smelting in the charge and technological conditions of
the works of Ukraine
With the purpose of solving practical problems of management of the slag regime
of blast furnace smelting in the Institute of iron and steel of the National Academy of
Sciences there are created physical and chemical bases of predicting of structure and
properties of blast furnace smelted products, automatic system "Slag" is developed for
the control and management of a slag regime of blast furnace smelting. The system
introduction has allowed to stabilise a slag regime in the limits providing pig-iron
smelting of required quality. It is shown, that the system "Slag" development is
connected with an establishment of scientifically proved dependences of mutual
influence of components of pig-iron and slag in shaft of the blast furnace, working out
of criteria and the ratios, describing conditions of the coordination of their structures.
V.I.Bolshakov, A.F.Shevchenko, A.S.Bulahtin, A.M.Bashmakov, L.P.Kurilova
Material and energy saving process of deep pig-iron desulfuration
415
The purpose of the work was comparison of the basic technological indicators of
industrial work of complexes on the number of steel works with capacity from 2, 1 to 6,
0 million ton per year and sulphur decrease in pig-iron from 0,006-0,099 % to 0, 0005-
0,010 %. It is shown, that the new technological process of refinement of pig-iron
developed and mastered by the Ukrainian experts by magnesium blowing without
additives provides deep and especially deep pig-iron desulfuration in the conditions of
large industrial metallurgical manufacture. The development is checked up by the wide
industrial experimental work and it is recommended for wide application at the
metallurgical enterprises.
A.S.Vergun, V.G.Kislyakov, A.F.Shevchenko, B.V.Dvoskin, A.M.Bashmakov
The condition and perspectives of the industrial realization of the external iron
desulfurization process
The purpose of the work was further development of the iron desulfurization
technology by the granulated magnesium without addition agents. The information
concerning industrial implementation of this technology and of the new generation
equipment is given and the suggestions for realization of this technology on the
Ukrainian metallurgical enterprises are also developed.
S.I.Semykin, V.F.Polykov, E.V.Semykina, T.S.Kiyashko, A.S.Semykina
Comparison of the refining metal effectiveness in the converter and casting ladle
during electric potential application
The goal of the work was the application perspectives detection of the electrical
energy of the low power density during the converter metal smelting and on the stage of
metal working in the casting ladle. The peculiarities and effectiveness of using of low-
voltage electric potential on the melt are compared. The fundamentals, concerning the
nature of the obtaining effects are formulated. The research showed the availability of
the complex low-voltage electrical energy application on the both stages of the steel
remelting.
S.I.Semykin, V.F.Polyakov, V.V.Vakulchuk, S.A.Dudchenko
Temperature distribution study on the volume of the bath during cold
modeling using of the top-blown converter process
The goal of the work was study of influence of blast regime parameters on
temperature distribution in the volume of the converter and detection of temperature
distribution mechanisms during using electric potentials influencing on bath. The
research of the process was carried out on the universal cold table simulator. The
influence of the blast regime parameters on temperature distribution in the volume of the
bath by using electric potential is shown. The influence of current intensity in the circuit
of the tuyere is defined, which is electrode influencing the development of the thermal
process.
V.P.Korchenko, L.G.Tyboltsev, V.F.Polyakov, N.I.Padyn, A.M.Shevchenko
Dephosphorization and desulphurization regularities on the final stages
oxygen converter smelting with combined blowing
The purpose of the research was studying of phosphor and sulphur behavior in the
process of oxygen converter smelting. Technological capabilities of the final stages of
oxygen converter process with combined blowing for metal smelting with low phosphor
and sulphur content are researched. It is shown that at constant amount of phosphor and
416
sulphur, taken along with lime and scrap, the dynamics of changing of sulphur content
in the metal depends on sulphur content in the pig iron. Minimal phosphor content,
achieved on the stage of the full decline of the flame, doesn’t decrease on the afterblow
stage. In the afterblow process and during metal washing by the neutral gas through
bottom tuyere without oxygen feed from above, the sulphur content decreases to 0, 0030
– 0, 0072 %.
V.P.Piptyk, V.F.Polyakov, A.B.Kovyra, A.A.Travinchev, S.N.Pavlov, I.L.Byzyn
The data for numerical research of the ladleman bath thermal condition of
high capasity during smelt working on the ladle furnace
The purpose of the research was study of using capability of mathematical
modeling for researching of melt behavior in the volumes of hostile environment (hot
metal and slag) in the conditions of sampling impossibility and inability of temperature
melt measuring. The data for numerical investigation of thermal processes in the
metallic bath of the ladle furnace with the ladle capacity 350 t are given. The choice for
basic data is carried out by using statistical and numerical analytical procedures.
A.A. Gorbanev
The development of scientific manufacture fundamentals of the high-quality
rolled wire
The purpose of the research is discussing the results of scientific research complex
and applied developments, carried out under the direction of Zhuchkov S.M. The results
of these researches and the possibility of their usage in the practice of rolling
manufacture on the metallurgical enterprises of Ukraine are given.
S.M.Zhuchkov, D.G.Palamar, V.G.Razdobreev, A.P.Ivanov, A.I.Leshenko
Information and analytical system of continuous section rolling
The purpose of the research is creation of information support of problem solution
of energy supply economic usage in the metallurgical manufacture. The characteristics
of the created information and analytical system of the continuous section rolling, which
allows to carry out analytical researches of the continuous section rolling process on the
mills with different technological schemes of manufacture is given. It is shown that
mathematical models usage, which are the part of the calculation set of information and
analytical system on the mill 250–1 of the enterprise «Arselormittal Krivoi Rog»
provides energy saving to 5%.
B.N.Kolosov, A.A.Gorbanev, P.V.Tokmakov, P.A.Kiselov
The choice and justification of the calculation technique of energy-power
parameters of rolling on the reversible cogging-billet mill
The purpose of the research is the choice and justification of the calculation
technique of the energy-power parameters of rolling on the reversible cogging-billet
mill. As the basis of calculation technique of the energy-power parameters of rolling on
the mill 850 assigned the main analytical, empirical and half empirical statements,
which describe adequately the conditions of rolling on the cogging reversible mills. The
calculation of the energy-power parameters of the reversible rolling of the round section
billet with the diameter 80 mm from the steel grade ШХ15.
S.M.Zhuchkov, K.J.Klychnikov, A.P.Lohmatov, I.V.Sikachina, J.S.Galenko,
J.M.Beklemeshev, L.P.Barisheva
417
The development of the main approaches to the projection of parameters
process of steel strips spreading of the wide dimensional assortment using the
method «rolling – drawing»
The purpose of the research is development of basic approaches to the projection of
the technological schemes of the process “rolling – drawing” for the production of strip
profiles of the wide dimensional assortment. Mathematical simulation means of the
spreading process, which allow projecting the technological schemes of strip profiles
manufacture, are developed. Numerical and analytical investigations are carried out by
means of modeling using final elemental model.
A.J.Pytnoki, V.G.Ivanchenko, V.T.Tilik
Technological capabiliyies of using the whole field of thickness tolerances
during hot strip rolling
The purpose of the research is occurrence of technological capabilities of using the
whole field of thickness tolerances during hot strip rolling. Usually before adjustment of
the mill for rolling one defines the magnitude of the required excess of the strip
thickness above the nominal one when leaving the last stand. The equation for
calculation of magnitude of this excess is suggested and it is proportional to actual
magnitude of crosscut gage interference of the strip, this allows to hold on the thickness
of the rolled strips in the field of blanks on allowable level.
S.A.Vorobei, A.N.Stepanenko, G.V.Levchenko, T.V.Gritsai
Rational schemes of thin hot strips production from low-carbon steel
The purpose of the research was the choice of rational schemes of thin hot strips
manufacture with necessary structure and properties on hot broad-strip rolling mills. The
Results of the research of various schemes of thin hot strips manufacture from low-
carbon steel for cold forming. From attitude to the receipt of microstructure rational
schemes of hot rolled strips manufacture depending on their thickness and type of a
stand of hot rolling are offered.
I.J.Prihodko, P.P.Chernov, V.V.Raznosilin, A.A.Sergeenko, S.V.Trusillo,
V.A.Agureev, A.I.Sobolev, E.A.Parsenjuk, J.A.Tsukanov
The first domestic system of the automatic control of flatness of strips by using
contactless methods of measurement of flatness and temperature
The purpose of the research is the creation of a complex of systems of automatic
control for sheet stands. The first domestic system of automatic control of flatness of
strips for cold rolling stands, using a contactless optical method of measurement of
flatness and thermal imaging method of measurement of strips temperature is presented.
The advantages of this system in comparison with traditional systems on the basis of
stressmetric roller, and also practical results of using system are described.
V.I.Spivakov, E.A.Orlov, P.L.Litvinenko
The ways of development of deformative-thermal hardening of thick sheet and
broadband rolled stock
The purpose of the research was revealing of perspective ways of development of
thick sheet and broadband rolled stock manufacture. The analysis of the works executed
in the Institute of Steel and Iron of National Academy of Sciences of Ukraine of Z. I.
Nekrasov of the problem of deformative-thermal hardening of structural thick sheet and
broadband rolled stock is given. It is shown, that the achieved technical decisions
418
correspond to their world analogues and allow to manufacture economic and
competitive hardened sheet rolled stock.
V.A.Lutsenko, V.A.Matochkin*, O.V.Lutsenko, M.F.Evsjukov,
V.G.Chernichenko, A.S.Kozachek, V.I.Shcherbakov
Modern technological approaches to the directed formation of structure and
properties of high-carbon rolled wire
The kinetics of disintegration of austenite from high-carbon steel 80 with the
regulated content of chrome and manganese at continuous cooling in the range of speeds
0,4 … 17,00C/sec. is investigated. It is established, that at speeds of cooling 0, 4–
4,80С/sec the temperature of the beginning and the final austenite transformation in this
steel raises on 100С. Retrogressive dependence of ultimate strength from chrome and
manganese content is revealed for the steel 80. The received results can be used for the
directed formation of structure and properties in the high-carbon rolled wire intended for
ultra high-strength of wire and metal cord manufacturing.
O.G.Sidorenko, I.P.Fedorova, A.P.Suhoj
The research of formation regularities of rainforcing bar rolled stock structure
which is thermally strengthened with application of ways of interrupted and
descrete hardening in the stream of the rolling mill
The purpose of the research was the research macro-and microstructures of
rainforcing bar rolled stock thermally strengthened by the method of interrupted
hardening in the stream of the stand. It is established, that within a strengthened bar at
the distance of 0,3 – 0,4 of its radius one can see the border of transition from one
regularities of formation of structure of rolled stock section to the other ones. It is
shown, that occurrence at hardening of separate parts of degenerated perlite, and then
the subsequent gradual replacement by them ferrite-perlite structures, is observed
irrespective of the content of chemical elements in them.
M.F.Evsjukov
The ultrasonic quality assurance of railway wheels and bandages. development
and achievement stages.
The purpose of the research is studying the stages of development of the ultrasonic
method of railway wheels and bandages quality estimation in 1982 – 2006. It is
established, that developed technologies of the ultrasonic method of the control of all
elements of wheels and bandages allow to carry out 100 % of the control of all
assortment of wheels and the bandages which are produced both for the internal
consumer, and for export in compliance with national and foreign standards.
I.G.Uzlov, K.I.Uzlov, A.I.Babachenko, A.N.Hulin, A.A.Kononenko
Experimentally industrial realization of production technology of high-
strength locomotive bandages of the raised wear resistance
Under production conditions of the wheel rolling shop of the public corporation
«Interpipe NTZ» technological schemes of melt, out of furnace processings, rolling, and
thermal hardening of high-strength with the raised wear resistance of railway bandages
of grade «Т» on Standard 35. 2–23365425–628:2008 are realized. From the tested ways
of cooling of high-strength locomotive bandages 1060х143х98, produced from the
microalloyed by vanadium steel, the most effective from the point of view of
419
achievement of competitiveness and necessary level of mechanical properties are piece
hardening by the vertical hardening car and volume hardening by the stock.
V.S.Luchkin, L.G.Tuboltsev, N.I.Padun, A.M.Shevchenko
The diagram of the condition and the structure of liquid fe-c alloys
The purpose of the research is the development of theoretical views about the
structure and properties of multicomponent metal melts, detection of possible structure
of liquid elementary cells, kinds and concentration intervals of existence of material
particles from atoms of iron and carbon. The model of liquid elementary cells of
corresponding crystal lattices Fe-C of the alloys defining materiality of particles in a
liquid condition is offered on the basis of which the structures of liquid phases on the
diagramme of condition Fe-C of alloys are considered.
A.M.Nesterenko, A.B.Sychkov, V.J.Poluektov
Deformation ageing of rolled wire from the steel of grade СВ–08G2С
The purpose of the work is the establishment of regularities of complex change of
mechanical properties of wire rod from steel Сb-08G2С microalloyed by boron, at
deformation temperatures 100-5000С. It is established, that the higher plasticity and
processability at deformation by drawing wire rod from steel Сb-08G2С microalloyed
by boron, in comparison with wire rod from the similar steel without boron is caused by
smaller degree of development of dynamic deformation ageing.
G.V.Levchenko, A.M.Nesterenko, V.L.Pljuta, S.V.Bobyr, P.D.Grushko,
O.S.Kasjan
The research of cast structure of manganous and chrome- manganous iron-
carbon alloys
The purpose of the research is further studying and analysis of phase-structural
transformations in the system Fe-Cr-C. It is shown, that cast chrome-manganous alloys
with colonial eutectic on the basis of carbide Ме7С3 are characterised by the high level
of great impact-abrasive wear resistance defining availability of their use for
manufacturing of wear-proof details of the replaceable metallurgical equipment.
M.F.Evsjukov, A.A.Brovko
The influence of the structural condition on thermal properties of steels and
pig iron
The purpose of the research was complex studying of change of values of
coefficient of linear expansion at heating and at cooling in high-strength pig iron and
white wear-proof pig iron in the range of temperatures 200 … 10000С, an estimation of
influence of structural components on values of coefficient of linear expansion in the
course of cooling of real products. For the first time regular data on average and true
values of coefficient of linear expansion (α) both at heating, and at cooling in the range
of temperatures from 200С to 10000С are described.
V.F.Moroz, E.V.Prihodko, N.E.Hodotova
The behaviour of hydrogen in the various structural constituents of carbon-
containing alloys and steels
The purpose of the research was studying of regularities of hydrogen behavior in
the steels defining their hydrogen fragility. By using physical and chemical model of
metal melts with ACC– the similar structure, the behaviour of hydrogen in various
420
structural carbon-containing alloys and steels was analyzed. The connection of hydrogen
solubility, the coefficient of its diffusion and water permeability with parametres of
internuclear interaction in multicomponent phases and alloys is established at numerical
level.
V.I.Bolshakov, J.I.Cherevik, A.M.Bashmakov
Estimation of change frequency of the technological loading operating on
tuyere during pig-iron desulphurization
The purpose of the work was definition of rational constructive and regime parameters
of the equipment realizing the technology of out of furnace desulphurization of pig-iron. The
analytical dependences, allowing defining the mechanism of formation of the forced
vibrations, size and frequency of their change depending on design data of tuyere,
modes of blasting and intensity of processes of steam formation are received during
magnesium evaporation. It is shown that the knowledge of size and character of change of the
technological loading operating on tuyere and its drive allows to provide high reliability and
durability of the equipment.
K.V.Bajul, B.N.Majmur, N.A.Solodkaja
Development of the technical decisions providing the control and regulation of
operating modes of rolling and briquetting presses
The purpose of the research was development of requirements to an automatic
control system by the current parameters of briquetting process and rolling press work as
a part of a technological line of briquette manufacture. The analysis of the parametres
the knowledge of which is the most important for technological and technical modes
estimation of rolling press operation is fulfilled. It is shown, that the main role plays first
equipment of rolling presses with the measuring instrument of compacting force, the
gage of the control of burden level in the over-press hopper, temperature and humidity
gages of burden and the frequency converter. Technical capabilities of measurement of
required parametres by using measuring means of various manufacturers and the level of
equipment of foreign presses by registering and operating equipment are considered.
V.I.Bolshakov, A.M.Junakov, E.A.Evteev
The researches of loading of the equipment during mastering, operation and
development of the wire stand
The purposes of the research were development and mastering of the production
technology of high-quality wire rod of wide grade composition, research and
optimisation of operating modes of the modern equipment, the establishment and use of
its reserves. Research results of drive loading lines of the equipment, including dynamic
and vibrating processes are presented. It is shown, that usage of the results of the given
research during mastering, operation and development of the wire stand has allowed to
provide release of the competitive production.
V.V.Verenev, V.I.Bolshakov, A.M.Junakov
Models of dynamic processes in rolling mills
The purpose of the research was the perfection of models of dynamic processes in
rolling mills taking into account nonlinearity of elastic linkages. Several developed (in
the Institute of iron and steel) base models of transitional processes depending on the
solved problem are presented. The systematization of the computer models applied to the
research of dynamic processes in the main lines and stands of rolling mills is given. On
421
the basis of models, technical offers about rolling speed increasing and improvement of
technical characteristics of rolling mills are proved, developed and successfully realized.
A.V.Borodulin
The power and ecological aspects of coking blast furnace manufacture
functioning in the conditions of the economic crisis
The purpose of the work is formation of suggestions about finding the way out from
crisis for iron and steel industry. The system aspects of subindustry functioning are
considered in the conditions of crisis at different levels, some measures in dominating
blast furnace manufacture are given. It is shown, that during the energy crisis the role of
structural optimisation of blast furnace manufacture, abilities to work on variable modes
and their flexible economic reorganisation according to the market conditions and other
restrictions increases.
E.V.Prihodko, D.N.Togobitskaja
The complex usage of methodology of physical, chemical and mathematical
modelling for optimisation of metallurgical technologies
The purpose of the research was solving of optimisation problems of metallurgical
technologies with usage of methodology of physical, chemical and mathematical
modelling and the criteria connected among themselves by difficult nonlinear
dependences. Examples of usage of long-term experience of creation of the information
and intellectual resource are given. It is shown that the application of the developed
models complex created on the basis of using the given methodology, allows solving
problems of optimisation of interface metallurgical metal production successfully.
V.I.Bolshakov
Memoirs on the outstanding scientist-mechanic
New data about the life and creative activity of the Doctor of Engineering, prof.
A.V.Prazdnikov who was the pupil and the successor of scientific school of dynamics of
machines of correspondent-member of Academy of Science of USSR S.N.Kozhevnikov
are presented.
M.P.Kuznetsova
MEMORIES ABOUT ANATOLIY VLADIMIROVICH PRAZDNIKOV
Maria Petrovna Kuznetsova’s memories about the way of life of her husband – the
Doctor of Engineering, prof. A.V.Prazdnikov who was the significant scientist in the
field of dynamics of machines are presented.
A.M.Ioffe
Anatoliy Vladimirovich Prazdnikov
It is 80 years from the date of Anatoliy Vladimirovich Prazdnikov's birthday, who
was the head of machine science department of the Institute of iron and steel, the
professor, the Doctor of Engineering for a long time.
V.D.Chehranov
Going ahead
V.D.Chehranov's note about Anatolii Vladimirovich Prazdnikov has been
published in the newspaper «Pravda Ukrainy» («The truth of Ukraine»), November
422
the 5th 1970, under the heading «the Word about a companion». The full text of this
note is given below.
J.P.Karpinsky, O.N.Kukushkin, V.A.Chigrinsky, J.A.Dinnik, V.N.Kuvaev,
D.A.Ivanov, I.V.Politov
The system start-up – the creation and introduction history
The system of programmed control of the speed of stands "START-UP" is one of
the significant developments of Institute of iron and steel, widely introduced into the
industry on the continuous wire stands of works "Krivorogstal", Magnitogorskiy
integrated iron-and-steel works, Makeevsky metal works, public corporation
«Arselormittal Krivoi Rog».
A.I.Sivak, V.G.Chernichenko
The department of the thermal processing of metal for mechanical
engineering: scientific problems and achievements
The data about the department of thermal processing of metal for mechanical
engineering of the Institute of iron and steel of Ukrainian National Academy of Science
which develops the scientific bases and technological processes of manufacture of high-
quality rolled stock and wire rod of wide range of grades are given.
I.P.Fedorova, V.S.Luchkin
K.P.Bunin’s scientific school in the Institute of Iron and Steel of Ukrainian
National Academy of science
Memoirs of pupils about K.P.Bunin and about the development of his scientific
school in the Institute of iron and steel.
A.I.Babachenko
Roads which we choose
Short data about leading experts of the department of deformative and thermal
processing of structural steels of the Institute of iron and steel of Ukrainian National
Academy of Science of Z.I.Nekrasova, working in Institute more than forty years are
stated in the article. It is devoted to 70th anniversary of the Institute of iron and steel.
G.G.Efimenko
The development and introduction of the complex technologies of expenses
reduction of coke and natural gas for efficiency increasing of pig-iron and
ferroalloys smelting
There is the feedback on the work presented on nomination of the State science
award of Ukraine for 2009.
|
| id | nasplib_isofts_kiev_ua-123456789-63156 |
| institution | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| issn | XXXX-0070 |
| language | Russian |
| last_indexed | 2025-12-07T13:14:29Z |
| publishDate | 2009 |
| publisher | Інститут чорної металургії ім. З.І. Некрасова НАН України |
| record_format | dspace |
| spelling | 2014-05-29T20:09:01Z 2014-05-29T20:09:01Z 2009 Аннотации // Фундаментальные и прикладные проблемы черной металлургии: Сб. научн. тр. — Дніпропетровськ.: ІЧМ НАН України, 2009. — Вип. 19. — С. 413-422. — рос. XXXX-0070 https://nasplib.isofts.kiev.ua/handle/123456789/63156 ru Інститут чорної металургії ім. З.І. Некрасова НАН України Фундаментальные и прикладные проблемы черной металлургии Аннотации Article published earlier |
| spellingShingle | Аннотации |
| title | Аннотации |
| title_full | Аннотации |
| title_fullStr | Аннотации |
| title_full_unstemmed | Аннотации |
| title_short | Аннотации |
| title_sort | аннотации |
| url | https://nasplib.isofts.kiev.ua/handle/123456789/63156 |