Аннотации
Saved in:
| Published in: | Фундаментальные и прикладные проблемы черной металлургии |
|---|---|
| Date: | 2009 |
| Format: | Article |
| Language: | English |
| Published: |
Інститут чорної металургії ім. З.І. Некрасова НАН України
2009
|
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/63158 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Аннотации // Фундаментальные и прикладные проблемы черной металлургии: Сб. научн. тр. — Дніпропетровськ.: ІЧМ НАН України, 2009. — Вип. 20. — С. 389-400. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of Ukraine| _version_ | 1859837452413304832 |
|---|---|
| citation_txt | Аннотации // Фундаментальные и прикладные проблемы черной металлургии: Сб. научн. тр. — Дніпропетровськ.: ІЧМ НАН України, 2009. — Вип. 20. — С. 389-400. — англ. |
| collection | DSpace DC |
| container_title | Фундаментальные и прикладные проблемы черной металлургии |
| first_indexed | 2025-12-07T15:35:54Z |
| format | Article |
| fulltext |
389
Abstracts
V.I.Bolshakov, N.M.Mozharenko, N.G.Ivancha, G.N.Golubyh,
V.N.Loginov
The technological rational reception substantiation of blast furnaces
blowing-in of the big and average volumes.
The research purpose is working out of technological parameters of blast
furnaces work providing their accident-free blowing-in. Generalization of
intensive blowing-in methods of blast furnaces is executed, modern
fundamentals, effective and blowing-in safe technology of blast furnaces are
developed and systematized. It is shown, that blowing-in of the furnace
demands thorough preparation and strict observance of all operations according
sequence to the developed technological instruction that will provide industrial
safety and prolongation of blast furnace campaign.
A.V.Borodulin, K.A.Dmitrenko, N.M.Mozharenko, S.V.Nyn,
D.V.Pinchuk, A.A.Sohatsky, A.L.Chajka
Monitoring and heat engineering analysis of blast furnace blowing out
with nitrogen application in the 5000 м3 volume furnace
The work purpose is recommendations development about blast furnaces
blowing out with the maximum preservation of lining elements and cooling
plates of the shaft, hearth, top protection and load device. On the example of BF
№ 9 the program of blast furnace blowing out with nitrogen application that has
provided minimization of the harmful consequences to blast furnace, applied to
the lining as a result of furnace pouring by water is developed, it has lowered the
explosive mix formation probability of hydrogen and oxygen. The estimation of
blasting application efficiency enriched by nitrogen is given.
I.G.Tovarovsky, A.E.Merkulov, F.M.Shutylev, V.V.Lebed
The influence parameters research of outlets on the smelting
operation course with the multizone mathematical model help
The work purpose is parameters influence studying of outlets on smelting
operation course with mathematical model application. It is shown, that
efficiency increase of blast furnace smelting by means of burden materials
distribution perfection in the blast furnace should be conducted in a direction of
rational distribution search of ore loadings in ring zones on tap radius, paying
special attention at axial and peripheral zones.
N.A.Gladkov
The experience analysis of the combined blasting application
The work purpose is the search of optimal composition of the enriched by
oxygen blasting and efficiency increasing possibility studying of natural gas
application in blast furnaces. It is shown, that efficiency of natural gas use is
defined by level of theoretical temperature of gas at lances, coefficient of coke
390
replacement by natural gas, high quality of mixing with the blasting excluding
soot formation and hydrocarbons polymerization. The further optimization of
the combined blasting composition, natural gas consumption and conditions of
its application is necessary.
A.S.Nesterov, V.I.Bolshakov, N.M.Mozharenko
Studying of initial melted slags behaviour on the coke nozzle at coal
injection.
The work purpose is studying of technological parameters changing level
of burden materials and their influence on coal efficiency fuel application in the
technology of blast furnace smelting. It is shown, that a defining link of
replacement efficiency of coke part by the prepared coal fuel is stability of coke
quality at high temperatures and rational distribution of iron-ore materials on
blast furnace section.
D.N.Togobitskaya, A.F.Hamhotko, D.A.Stepanenko
The crystallizing ability estimation and mineralogical composition of
final blast furnace slags in the raw and technological conditions of the
Ukrainian blast furnaces work
The work purpose is the estimation of the crystallizing ability and
mineralogical composition of final blast furnace slags, typical for charging and
technological conditions of Ukraine blast furnaces. The slag adjustment
analysis of BF №9 of the public corporation «ArselorMittal Krivoi Rog» is
carried out, the maximal speed of its crystallization and the allocated firm phase
quantity is investigated at cooling of blast furnace slag. According to the
complex of the properties characterizing the crystallizing ability of slag,
viscosity and sulfur stripping ability, its optimal composition is proved.
A.F.Shevchenko, A.M.Bashmakov, A.S.Bulahtin, B.V.Dvoskin,
L.P.Kurilova, A.V.Ostapenko
The capabilities development of ladle pig-iron refinement process by
the disperse magnesium
The research purpose is the further development of the Ukrainian
technology of pig-iron desulfuration by granulated or granular magnesium
inflation, steady decrease maintenance of sulphur content in pig-iron to 0,001–
0,002 % in the conditions of large industrial steel production. Calculating and
experimental parameters of system [Mg] – [S] sizes change in the conditions of
magnesium granules inflation are given during deep (≤0,005 % of sulphur) and
especially deep (≤0,002 %) pig-iron desulfuration. The conditions of process
and its technical and economic advantages are described.
391
A.F.Shevchenko, A.V.Ostapenko, B.V.Dvoskin, S.A.Shevchenko,
A.P.Tolstopyat
Predictive estimation of magnesium granules inflation parameters in
liquid pig-iron through double nozzle lance
The research purpose is studying of increase intensity possibility of
magnesium input in liquid pig-iron during its out-of-furnace desulfuration for
increasing the process productivity. It is shown, that double nozzle application in
the course of granular or granulated magnesium inflation into the ladles
promotes the best distribution of blown magnesium and gas in the pre-lance zone and
creates preconditions for more active dispersion. It allows reducing duration of
process.
A.S.Vergun, A.F.Shevchenko, V.G.Kislyakov, A.L.Rudenko
|The role of the ladle slag at pig-iron desulfuration by magnesium
The work purpose is the on the desulfuration process during granulated
magnesium injection into pig-iron through the lance. Data about ladle slag
composition influence on the efficiency of magnesium interaction with sulphur
are presented. It is shown, that generated oxidizing slag in a ladle basicity can
make negative impact on results of pig-iron desulfuration process.
S.I.Semykin, V.F.Polyakov, S.A.Dudchenko, V.V.Vakulchuk
Features exploration of a sulphur removal in the converter, metal, with
a miscellaneous the sulphur and manganese contents at use of low-voltage
potentials
The research object was the establishment of the basic dependences
connecting electric and purging gas-dynamic parameters in the oxygen
converter. By using the methods of cold modeling the basic blast factors,
connecting electric signals, removed from the sector of lance – bath and the
hydrodynamic processes occurring in a bath at a purge from above are
considered. It is shown, that the change character of the electric signals
registered on the area lance – bath, reflects hydrodynamic modes of purging,
spatters, wave formation and bath pulsation.
T.S.Kiyashko, S.I.Semykin, E.V.Semykina
The research of desulfuration features in the converter of metal with a
miscellaneous sulphur and manganese content during low-voltage
potentials application
The work purpose is the features investigation and the removal level
estimation of sulphur in the converter at low-voltage potentials of various
polarity application. Pig-irons with wide range of sulphur and manganese
content were exposed to processing. The expediency of low-voltage potentials
application during pig-iron processing with the low sulphur and manganese
content is established. Specificity of sulphur removal domination from the
metal in slag is confirmed at negative polarity potential and in gas - at positive.
392
I.A.Pavluchenkov, V.P.Piptuk, M.V.Babenko, L.A.Ignatenko,
S.N.Pavlov, V.F.Polyakov
The model development and refractory additives fusion processes
researching on the border of interface
The work purpose is insufficiently known questions investigation of
aluminum lumpy additives fusion, ferrotitanium and ferrosilicon, charged into
the ladle on fusion release on a bath surface. The mathematical model and
results of a calculative estimation of refractory lumpy additives fusion duration
on the border "slag-metal" in the conditions of smelt processing on the system
"ladle-furnace" that will allow to predict ladle efficiency technology and to
form measures concerning resource-saving is given.
V.P.Piptuk, A.F.Petrov, A.F.Hamhotko, S.N.Pavlov, S.V.Grekov,
V.A.Kondrashkin
Physical and chemical properties of steel remaking refining slags
The work purpose is specification of the analytical dependences describing
the basic properties of multicomponent slag systems, for real slags properties
estimation of steel remaking. The modelling description of structure of refining
slag melts is considered. The equations of values experimental communication
of viscosity are given, density and a superficial tension of slags with their
modeling parameters and corresponding settlement and experimental data are
compared. A perspective of physical use and chemical methodology for an
estimation of real slags properties of steel remaking is confirmed.
V.P.Korchenko, L.G.Tuboltsev, V.F.Polyakov, N.I.Padun,
A.M.Shevchenko
The oxidation laws of silicon and manganese at the final stages oxygen-
converter smelting with the combined purge
The work purpose is research of the final stages oxygen converter smelting
features with the combined purge for metal obtaining with the low and ultra
low maintenance of impurity. It is shown, that at the final stages of smelting
low and ultra low maintenances of carbon, silicon, manganese, phosphorus and
sulphur are reached, the oxygen maintenance in metal decreases and stabilizes.
The received quantitative values of indicators can be used for an estimation of
metal quality and technical and economic indicators of metal melt process with
the low maintenance of silicon and manganese.
V.P.Piptuk, V.F.Polyakov, I.A.Pavluchenkov, S.E.Samohvalov,
A.F.Petrov, M.V.Babenko, S.N.Pavlov, L.A.Ignatenko
Use of numerical methods in studying properties and conditions of
material additives during steel manufacture
393
The work purpose was studying of use possibility of physical and chemical
methodology in studying of ferroalloys properties, firm slag making mixes,
their components and refining slag systems applied at different stages of steel
remaking. Working-out necessity of the mathematical models describing fusion
(dissolution) of used additives on border of metal section and slag phases
taking into account a trajectory of their movement, hydrodynamics and a
thermal condition metal melt is defined
L.G.Tuboltsev, V.P.Korchenko, D.N.Togobitskaya, N.I.Padun,
A.M.Shevchenko
Interface technologies of steel production
The work purpose is theoretical positions perfection on working-out of
interface technologies of the metal products, the defining feature of which is
chain use of various steel-smelting units following one after another and
reception purpose of final metal products with the set chemical compound,
corresponding quality and with minimum power and material inputs. The
system decision of a problem on the basis of through technology consideration
as dynamically changing industrial system is used. Research is intended for
working-out of offers on improvement of manufacture processes of steel with
the properties complex.
S.M.Zhuchkov, P.V.Tokmakov, A.I.Leshchenko, S.I.Baduk
The design of three focal rolling module at its installation in a line of a
continuous section mill
The work purpose is working-out of requirements and the technological
concept of three focal rolling module according to technological problems,
power parameters of rolling and an arrangement in a line of the continuous
rolling mill. Possible schemes of three focal rolling module are considered and
variants of its constructive execution are offered at its installation in a line of
operating and during construction of continuous high-quality rolling mills. It is
shown, that the general drive, rolling in the non-powered rolls should be kept
with small back backup and a forward tension.
S.M.Zhuchkov M.N.Shtoda, D.G.Palamar
Estimation of technological possibility of three-start thread rolling-
divisions organization with rebar № 8 on the stand 250
The work purpose is studying of technological possibility of process
realization of three-start thread rolling-division with non-powered deformation-
division device application during rebar manufacture. For conditions of
continuous light-section mill 250–1 of Open Society «ArselorMittal Krivoi
Rog» it is shown, that by rebar №8 manufacture technical possibilities of the
basic process equipment of a mill allow to realize technology without essential
reconstruction.
394
V.I.Biba, V.A.Olejnik
Working-out of universal calibration of rolls for high accuracy round
profiles rolling
The work purpose is working-out of rolls calibration technique, high
accuracy of the sizes providing achievement hot-rolled metal during rolling in
the fair calibres. The universal method of calculation and construction of round
two-and three rolled calibres with releases of the various form taking into
account permissible deviations on diameter of rolled metal of any class of
accuracy is stated. Application of the calibres calculated by the given technique
provides reception of round profiles with the set accuracy, promotes prevention
stripe formation and "moustache", and provides steady work of stands.
L.A.Shevchenko, V.V.Zelinskaya, L.T.Zhupinskaya
Research and definition of the steel surface clearing technological
parameters from low temperature plasma pollution
The work purpose is research of surface cleaning method of low
temperature plasma, alternative to traditional means of rolled metal steel
surface cleaning from pollution. Research is carried out and technical
characteristics on plasma cleaning of rolled metal from pollution are defined. It
is established, that each concrete capacity of plasmatron is answered with the
concrete optimum speed of its moving providing qualitative cleaning of rolled
metal surface from pollution.
A.J.Putnoki, V.T.Tilik, V.G.Ivanchenko, V.Z.Kutsova, T.V.Kotova,
A.A.Chernoivanenko
Structure, distribution of elements and properties of hot-rolled sheet
low-carboned steel 08 semi-sielent
The purpose of the given researches is studying of elements distribution in
low-carboned steels 08 semi-sielent structure, the rolling termination of which
occurred in the field of ferrite structures temperatures, and its influence on
formation of structure and metal property. Properties, structure and distribution
of chemical elements on section of hot-rolled sheet low-carboned steel, rolled
in the field of temperatures of ferrite metal conditions are studied. It is shown,
that higher values of strength and fluidity are observed during rolling in the
field of temperatures of ferrite condition.
O.S.Kasiyan, A.I.Breskina, S.D.Adamsky
The rape oil investigation as a basis of technological lubricating cooling
means for cold rolling of sheet steel
The work purpose is research of technological properties of lubricants
received on the basis of vegetative raw materials renewed in the conditions of
Ukrainian raw materials and which application can reduce considerably the raw
materials import for manufacture of technological lubricants and lubricoolants.
Ways influence of rape oil processing on thermal stability and lubricant
395
efficiency of technological lubricating-cooling means on their basis is
investigated. The optimum fatty-acid structure crude of rape oil for reception of
effective basis is defined.
S.M.Zhuchkov, M.S.Valetov, V.M.Kuzmichev, O.N.Perkov
Modelling of molding billet of the centre for a locomotive wheel on lead
samples
The research objective is studying of application possibility of the centers
for locomotive wheels on the existing equipment of wheel rolling shops,
including the demanded length of locomotive wheels nave. Within the limits of
possibilities studying of modeling billet centre naves manufacture on lead
preparations is carried out. Modeling has shown basic possibility of products
application with a nave in length to 345 mm. The effort at modeling did not
exceed 2,5 МН, that corresponds to effort of molding of natural samples nearby
80 МН.
I.G.Uzlov, K.I.Uzlov, A.V.Knish, A.M.Hulin, Z.A.Dementeva
The analysis phase transformations kinetics of the wheel-band steel
according to the hardening-microstructural analysis
The research object is studying of cooling speed influence on
structurization of the wheel-band steel. Formation of steel structural condition
and parameters of its formation depending on speed of cooling at thermal
hardening is investigated. It is established, that thermal kinetic structurization
of the wheel-band steel and, as a consequence, formation of properties,
essentially differ for the wheel-band steel microalloyed by vanadium and
without microalloying.
V.A.Lutsenko, M.F.Evsjukov, T.N.Panfilova, A.I.Sivak
The research of phase transformations kinetis into electrosteels
42Cr4Mo2
The work purpose is definition of cooling modes by manufacture of large
size rolled metal. The laws transformation kinetics and features of formation of
the microstructure in the electrosteel 42Сr4Мо2 after separate heating 8500С
with the subsequent cooling in the range of speeds 0,03 … 2400S/s are studied.
The researches results are presented in the form of the thermokinetic
diagramme of austenite transformation with the description of the formed
microstructures.
V.A.Lutsenko
The research of thin structural wire rod from the steel SV-10NMA
after hardened out thermomechanical processing
The work purpose is research of high-temperature deformation influence
and the subsequent conditions of cooling on austenite transformation kinetics
and a parity of structural components which are necessary for considering by
396
working out and introduction of new highly effective technological processes
of welding wire rod manufacture. It is shown, that after hardened out
thermomechanical wire rod processing from steel Св–10НМА is forming
multiphase ferrite-perlite-bainite-martensite structure, which provides high
plasticity and ability of steel to deformation forming. Features of thin structure
of ferrite, perlite, bainite and martensite in the island strengthening places
which do not interfere into the dispositions movement are revealed.
O.P.Ostash, A.I.Babachenko, I.M.Andrejko, V.V.Kulyk, A.A.Kononenko
The structural destruction mechanics and operational reliability of
railway wheels
The research purpose is working out of criteria which can serve as
indicators of railway wheels reliability, especially high-strength ones. For an
estimation of railway wheels reliability according to conditions of their
operation necessity of fracture toughness characteristics application is proved.
It is shown, that according to the indicators of cyclic fracture toughness,
characterising near-liminal and medium amplitude site of the kinetic
diagramme of fatigue failure, the wheels of mark KP-T practically do not
concede to similar indicators for wheels of mark КP–2.
A.J.Borisenko
About the structural heredity in greypig-irons
The work purpose is research of structural heredity in grey pig-irons as a
component of the general theory of the structural heredity in metals and their
alloys. The analytical review of data about the structural heredity in grey pig-
irons is carried out. Necessity of general theory working out of a structural
heredity in iron-carbon alloys, based on the knowledge of mechanisms of liquid
and solid-phase transformations is noted.
M.F.Evsjukov, I.A.Krivosheeva
The kinetics of beinite transformation in the medium-carbon steel
alloyed by molybdenum
The work purpose is studying transformation kinetics of overcooled
austenite in the big interval of cooling speeds of steel 32ХМА–3. It is
established, that alloying by molybdenum of the medium-carbon steels are
raised sharply by austenite stability at it diffusion disintegration, shifting
disintegration area on perlite and ferrite towards small speeds of cooling. It is
shown, that the disintegration area on bainite is separated from disintegration
area on perlite. Bainite transformation is realised in a very big interval of
cooling speeds in the range of temperatures 5300 – 3350С with formation,
basically, products of disintegration of granular structure.
L.A.Shevchenko,? .VV..Zelinskaja, L.T.Zhupnskajai
Research and determination of technological parameters of cleaning of surface
397
became low temperature plasma from contaminations
Research of surface cleaning method is the purpose of work by low
temperature plasma, alternative to traditional facilities of surface cleaning of
steel rental from contaminations. Research is conducted and technological
descriptions of the plasma cleaning of rental from contaminations are certain. It
is set that concrete optimum speed of his moving answers every concrete power
of plazmotrona, providing the high-quality cleaning of surface of rental from
contaminations.
V.F.Moroz, E.V.Prihodko, O.V.Kuksa
Parametres influence of internuclear interaction on steels and alloys
snowflake sensitivity
The purpose of the present work was studying of internuclear interaction
parametres influence on snowflake sensitivity of steels with application of
physical and chemical model of metal melts with axel centrical crystal –like
structure. Interconnection of snowflake sensitivity of steels of various structure
with integrated parametres of internuclear interaction is studied. It is
established, that with a chemical equivalent of structures ZY <1,3 e became
inclined, and with ZY> 1,5 e are not inclined to formation of flakes.
O.G.Sidorenko, I.P.Fedorova, A.P.Suhoj
The new methodical approach to researches of phase transformations
The work purpose was revealing of power influences nature under which
influence in processed steels and other materials phase transformations
develop, and studying of possibilities of the new methodical approach to their
researches. It is shown, that further theory development of phase
transformations can be provided under condition of the account of development
dependence of phase transformations from (absorption) of the warmth
necessary generating for restoration of thermodynamic balance.
V.I.Bolshakov, V.V.Butsukin
Estimation of pulsation development possibility in the rotating system
of an electromechanical drive
The work purpose is development research of pulsation in a two-mass
electromechanical drive of heavy metallurgical cars at the expense of an
exchange of energy between electric and mechanical systems. On the basis of
mathematical modeling pulsation occurrence in similar systems is shown if the
parity of elastic-mass and electric parameters is in limits of an adverse range. It
is shown, that at introduction of positive feedback frequency increases,
dispersion of energy of fluctuations decreases, stability of the drive decreases
and, as a rule, at fluctuations interaction of electric and mechanical systems of a
drive amplifies.
398
V.I.Bolshakov, I.B.Listopadov
Features of feeding device work at unstable rolling
The work purpose is unstable modes research of rolling on pilger rolling
mill in the conditions of emergency operation possible development of feeding
device work. Influence researches of rolling sleeve diameter increase on
kinematics of the feeding device working are carried out, the results of which
create preconditions for management system engineering by the feeding device
during pipes rolling, allow to make changes into design procedures of
constructive and energy-power parametres of its work.
A.M.Bashmakov
The complex equipment of pig-iron desulphuration by the granulated
magnesium
The work purpose is working out of requirements and layout decisions of
pig-iron desulfuration complexes by the granulated magnesium, considering the
organisation operated or projected manufacture individually from each
customer. For the cardinal improvement problem decision of a melted steel
quality, including the expense of low-sulphur manufacture and especially pure
from sulphur grades of steel, with simultaneous reduction of expenses for their
reception, at many large metallurgical enterprises one has found technology
application of out of furnace pig-iron desulfuration directed to steel-smelting
manufacture.
B.N.Majmur, K.V.Baiul, A.T.Lebed, V.I.Petrenko, S.V.Vashchenko,
A.G.Soja
Working out and control devices tests of pressing effort in roll
processes
The work purpose is working out of control devices for regulation and the
control of technological operating modes of rolling briquette presses. The
measuring instrument description of a new design pressing effort for rolling
briquette presses, its tests are given. On the basis of experimental data
interrelations between size of pressing effort and other parametres
characterising modes of briquetting process are established and analysed.
V.I.Bolshakov, J.I.Cherevik, A.M.Bashmakov
Working capacity estimation and modernisation of desulfuration pig-
iron installations equipment of the first GENERATION
The work purpose is equipment modernisation of pig-iron desulfuration
installations for decreasing in breakdown susceptibility, reliability and
durability increasing, maintenance of deep steady pig-iron desulfuration. The
working capacity estimation of installations equipment of the first generation
pig-iron desulfuration in which tuyere device plunged into a ladle with the melt
by gravity is executed. The modernisation of this equipment which has raised
its reliability and durability is carried out.
399
A.V.Borodulin, A.V.Vorontsov, M.V.Temlyantsev, A.L.Chajka
The dynamics macroanalysis of power consumption of the
metallurgical enterprise production by full power balance method
The research objective is the further development of the thermodynamic
analysis methods with construction of the full power balance used for an
estimation of potential energy saving of the metallurgical enterprise. On a
concrete example the expediency and efficiency of application of full power
balance of the prof. V.S.Stepanov using concept «exenergy», for the analysis of
power consumption of metal products in various economic conditions of
functioning of the enterprise is shown.
V.G.Chernichenko, M.D.Kutsygin, V.K.Spinjakov
Ultrasonic quality assurance of preparations in the metallurgical
enterprise conditions
The work purpose of not destroying quality assurance application
possibility studying of metal products by means of ultrasonic apparatus in the
conditions of the modern metallurgical enterprise. Application of an echo-
impulse method for test of billet with the section 150х150 mm allows to reveal
well enough defects of slag inclusions type, a pipe, internal cracks and
ruptures, stratifications. The analysis of results of the ultrasonic control allows
to estimate a technological level of manufacture and quality of rolled metal, to
define a number of the technical and organizational measures providing
competitiveness of production.
V.A.Gorohova, L.G.Tuboltsev, V.P.Korchenko, N.I.Padun
Manufacture modernisation problems and ecological situation in iron
and steel metallurgy of Ukraine
The work purpose is the ecological situation analysis in metallurgy of
Ukraine. It is shown, that during measures implementation directed on
improvement of the ecological situation, to 2012 year it is possible to count on
decrease of emissions of hotbed gases and dumps of a toxic waste in reservoirs,
and also on positive results of energy saving.
V.I.Bolshakov, E.V.Prihodko, I.G.Muraveva
Labour and a career of A.F.Shevchenko
Data about the life and the creative activity of the Doctor of Engineering
A.F.Shevchenko who is the pupil and the continuer of scientific school about
the out of furnace pig-iron desulfuration of prof. N.A.Voronova.
V.I.Bolshakov, E.V.Prihodko
To 75 anniversary of engineering science doctor, professor
V.F.Polyakov
Data about the life and the creative activity of the Doctor of Engineering,
400
the prof. V.F.Poljakov who is the prominent scientist in the field of steel-
smelting manufacture are given.
V.I.Bolshakov, G.V.Levchenko
To the 70 anniversary of engineering science doctor, professor
V.V.Parusova
Data about the life and the creative activity of the Doctor of Engineering,
prof. V.V.Parusov who is theprominent scientist in the field of materials
technology and thermal processing of the rolled metal are given.
V.I.Bolshakov, G.V.Levchenko
To the 90th anniversary from the date of Vadim Demjanovich
Chehranov's birthday
Data about the life and the creative activity of the Candidate of
Engineering, the laureate of the USSR state award, the former deputy director
of the Institute of Iron and Steel, who was the prominent scientist in the field of
rolling manufacture are given.
A.M.Junakov, V.I.Bolshakov
In honour to Igor Ivanovich Leepa
Data about the life and the creative activity of the Doctor of Engineering
I.I.Leepa who was the pupil of the corresponding member of USSR
S.N.Kozhevnikov and the prominent scientist in the field of metallurgical
machine science, theory of mechanisms and cars, dynamics of large cars are
given.
M.S.Valetov, V.M.Kuzmichov
100 years of M.J.Shifrin (1909-2001)
The article is devoted to 100 anniversary from the day of birth of the
known scientist, specialist in area of the rolling production of Doctor of
Engineering M.J.Shifrin.
|
| id | nasplib_isofts_kiev_ua-123456789-63158 |
| institution | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| issn | XXXX-0070 |
| language | English |
| last_indexed | 2025-12-07T15:35:54Z |
| publishDate | 2009 |
| publisher | Інститут чорної металургії ім. З.І. Некрасова НАН України |
| record_format | dspace |
| spelling | 2014-05-29T20:10:17Z 2014-05-29T20:10:17Z 2009 Аннотации // Фундаментальные и прикладные проблемы черной металлургии: Сб. научн. тр. — Дніпропетровськ.: ІЧМ НАН України, 2009. — Вип. 20. — С. 389-400. — англ. XXXX-0070 https://nasplib.isofts.kiev.ua/handle/123456789/63158 en Інститут чорної металургії ім. З.І. Некрасова НАН України Фундаментальные и прикладные проблемы черной металлургии Аннотации Article published earlier |
| spellingShingle | Аннотации |
| title | Аннотации |
| title_full | Аннотации |
| title_fullStr | Аннотации |
| title_full_unstemmed | Аннотации |
| title_short | Аннотации |
| title_sort | аннотации |
| url | https://nasplib.isofts.kiev.ua/handle/123456789/63158 |