Investigation the structured material surfaces using the quartz tuning fork based on an atomic force microscopy with controllable q-factor in two modes operation: “intermittent contact” and “shear-force”
We present a combination of an atomic force microscopy with a quartz-crystal tuning fork in ambient conditions. A silicon cantilever tip was attached to one prong of the tuning fork to realize shear-force and intermittent contact mode Fork-AFM operation. By electronically adjusting the quality facto...
Збережено в:
| Дата: | 2008 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Науковий фізико-технологічний центр МОН та НАН України
2008
|
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/7881 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Investigation the structured material surfaces using the quartz tuning fork based on an atomic force microscopy with controllable q-factor in two modes operation: “intermittent contact” and “shear-force” / Vo Thanh Tung, S.A. Chizhik, V.V. Chikunov, Tran Xuan Hoai // Физическая инженерия поверхности. — 2008. — Т. 6, № 3-4. — С. 210-215. — Бібліогр.: 20 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of UkraineБудьте першим, хто залишить коментар!