Modulator power supply for 200 kV electron gun of the VEPP-5 injection complex
The 200 kV electron gun modulator power supply based on the half-bridge converter providing the high frequency partial charge of the capacitive energy storage element is described. The algorithm developed for the power supply driving allows one to provide the soft switching of charging circuits and...
Gespeichert in:
| Veröffentlicht in: | Вопросы атомной науки и техники |
|---|---|
| Datum: | 2004 |
| Hauptverfasser: | Akimov, A.V., Bak, P.A., Kazarezov, I.V., Pachkov, A.A. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2004
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/78966 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Modulator power supply for 200 kV electron gun of the VEPP-5 injection complex / A.V. Akimov, P.A. Bak, I.V. Kazarezov, A.A. Pachkov // Вопросы атомной науки и техники. — 2004. — № 1. — С. 125-127. — Бібліогр.: 4 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
200 kV pulse modulator for power supply of VEPP-5 injection complex electron gun
von: Akimov, V.E., et al.
Veröffentlicht: (2004)
von: Akimov, V.E., et al.
Veröffentlicht: (2004)
Electron-optical system of 200 kV gun for the VEPP-5 preinjector
von: Akimov, V.E., et al.
Veröffentlicht: (2004)
von: Akimov, V.E., et al.
Veröffentlicht: (2004)
200 kV pulse generator for a power supply of the electron gun for the complex VEPP-5 preinjector
von: Akimov, V.E., et al.
Veröffentlicht: (1999)
von: Akimov, V.E., et al.
Veröffentlicht: (1999)
Solid state switch based pulsers for the injection system of the collider VEPP-2000
von: Grishanov, B.I., et al.
Veröffentlicht: (2004)
von: Grishanov, B.I., et al.
Veröffentlicht: (2004)
Pulse modulators for the VEPP-5 injection complex klystron power supply
von: Akimov, A.V., et al.
Veröffentlicht: (2001)
von: Akimov, A.V., et al.
Veröffentlicht: (2001)
Hysteresis effects in electron guns
von: Agafonov, A.V., et al.
Veröffentlicht: (2004)
von: Agafonov, A.V., et al.
Veröffentlicht: (2004)
The modified 200 keV pulsed electron beam source for the VEPP-5 injection complex
von: Akimov, A.V., et al.
Veröffentlicht: (2006)
von: Akimov, A.V., et al.
Veröffentlicht: (2006)
Investigation of system for external injection of H⁻ ion beam on cyclotrons
von: Veresov, O.L., et al.
Veröffentlicht: (2004)
von: Veresov, O.L., et al.
Veröffentlicht: (2004)
RF power supply system of industry irradiation facility
von: Gavich, V.T., et al.
Veröffentlicht: (2004)
von: Gavich, V.T., et al.
Veröffentlicht: (2004)
Improved characteristics of HV pulse modulators for technological accelerators
von: Dolgov, A., et al.
Veröffentlicht: (2004)
von: Dolgov, A., et al.
Veröffentlicht: (2004)
High voltage modulators based on solid-state elements for linacs (review)
von: Beloglazov, V.I., et al.
Veröffentlicht: (2004)
von: Beloglazov, V.I., et al.
Veröffentlicht: (2004)
Microwave feeding system elements of superconducting linear collider cavities
von: Bogdanovich, B.Yu., et al.
Veröffentlicht: (2004)
von: Bogdanovich, B.Yu., et al.
Veröffentlicht: (2004)
The injector of high power electron linac for industrial application
von: Ayzatsky, M.I., et al.
Veröffentlicht: (2004)
von: Ayzatsky, M.I., et al.
Veröffentlicht: (2004)
Accelerating structure of 10 MEV electron linac
von: Zavadtsev, A.A., et al.
Veröffentlicht: (2004)
von: Zavadtsev, A.A., et al.
Veröffentlicht: (2004)
Application of software and hardware components of CAN-technology for accelerator control
von: Chepurnov, A., et al.
Veröffentlicht: (2004)
von: Chepurnov, A., et al.
Veröffentlicht: (2004)
Numerical study of the centre region acceleration for the RIC-30 cyclotron
von: Andreeva, Z.A., et al.
Veröffentlicht: (2004)
von: Andreeva, Z.A., et al.
Veröffentlicht: (2004)
200 keV electron beam pulse source for the complex VEPP-5 preinjector
von: Akimov, V.E., et al.
Veröffentlicht: (2001)
von: Akimov, V.E., et al.
Veröffentlicht: (2001)
Research surface resistance of copper normal and abnormal skin-effects depending on the frequency of electromagnetic field
von: Kutovyi, V.A., et al.
Veröffentlicht: (2013)
von: Kutovyi, V.A., et al.
Veröffentlicht: (2013)
RFQ as a second section of front end of ion linac
von: Plastun, A.S.
Veröffentlicht: (2013)
von: Plastun, A.S.
Veröffentlicht: (2013)
Surface wave plasma source for broad-beam ion and electron production
von: Azarenkov, N.A., et al.
Veröffentlicht: (2004)
von: Azarenkov, N.A., et al.
Veröffentlicht: (2004)
Formation of uniform electron beams on large-area targets
von: Dovbnya, A.N., et al.
Veröffentlicht: (2004)
von: Dovbnya, A.N., et al.
Veröffentlicht: (2004)
Development of new elements of automated control systems linear accelerator
von: Boriskin, V.N., et al.
Veröffentlicht: (2013)
von: Boriskin, V.N., et al.
Veröffentlicht: (2013)
RF photogun and Cherenkov decelerating system for a high power radiation source in sub-mm region
von: Bashmakov, Yu.A., et al.
Veröffentlicht: (2012)
von: Bashmakov, Yu.A., et al.
Veröffentlicht: (2012)
Solid ion accelerator based on magnetron sputtering discharge
von: Azarenkov, N.A., et al.
Veröffentlicht: (2004)
von: Azarenkov, N.A., et al.
Veröffentlicht: (2004)
The use of series BA permanent magnets in steerers of the beam extracted from the electron linac
von: Dovbnya, A.N., et al.
Veröffentlicht: (2004)
von: Dovbnya, A.N., et al.
Veröffentlicht: (2004)
Monitoring position of the electron beam in the air
von: Boriskin, V.N., et al.
Veröffentlicht: (2004)
von: Boriskin, V.N., et al.
Veröffentlicht: (2004)
Calculation of thermal transient condition in the biperiodic accelerating structure
von: Zavadtsev, D.A.
Veröffentlicht: (2004)
von: Zavadtsev, D.A.
Veröffentlicht: (2004)
Analog computation of transients in the power amplifier of DTL RF system
von: Kvasha, A.I.
Veröffentlicht: (2004)
von: Kvasha, A.I.
Veröffentlicht: (2004)
Electrodynamic characteristics of high current IH-accelerating structure
von: Toporkov, S.E., et al.
Veröffentlicht: (2013)
von: Toporkov, S.E., et al.
Veröffentlicht: (2013)
Multi-channel electronics for secondary emission grid profile monitor of TTF linac
von: Reingardt-Nikoulin, P., et al.
Veröffentlicht: (2004)
von: Reingardt-Nikoulin, P., et al.
Veröffentlicht: (2004)
Development of alternatives for accelerating structure in the range of intermediate proton energy
von: Bomko, V.A., et al.
Veröffentlicht: (2004)
von: Bomko, V.A., et al.
Veröffentlicht: (2004)
UHF–load
von: Dovbnya, A.N., et al.
Veröffentlicht: (2004)
von: Dovbnya, A.N., et al.
Veröffentlicht: (2004)
Approximations of operating characteristics of the elliptic cross-section beam position monitors
von: Ivashchenko, V.E., et al.
Veröffentlicht: (2004)
von: Ivashchenko, V.E., et al.
Veröffentlicht: (2004)
Numerical modelling of multibeam accelerating structures
von: Gavrilov, N.M., et al.
Veröffentlicht: (2004)
von: Gavrilov, N.M., et al.
Veröffentlicht: (2004)
RF quadrupole focusing drift tube linac RF design
von: Plastun, A.S., et al.
Veröffentlicht: (2012)
von: Plastun, A.S., et al.
Veröffentlicht: (2012)
Measurements of LET spectra of the JINR phasotron radiotherapy proton beam
von: Kubančák, J., et al.
Veröffentlicht: (2013)
von: Kubančák, J., et al.
Veröffentlicht: (2013)
Electron beam emittance measurement at storage ring with internal target
von: Bashmakov, Yu A., et al.
Veröffentlicht: (2012)
von: Bashmakov, Yu A., et al.
Veröffentlicht: (2012)
Investigation of the hollow beam structure on optical transition radiaton
von: Ayzatsky, M.I., et al.
Veröffentlicht: (2004)
von: Ayzatsky, M.I., et al.
Veröffentlicht: (2004)
Investigation of stability electron beam parameters in sources with cold secondary-emission cathodes
von: Dovbnya, A.N., et al.
Veröffentlicht: (2004)
von: Dovbnya, A.N., et al.
Veröffentlicht: (2004)
Status of 174 Mhz RF system for BEP
von: Biryuchevsky, Yu.A., et al.
Veröffentlicht: (2012)
von: Biryuchevsky, Yu.A., et al.
Veröffentlicht: (2012)
Ähnliche Einträge
-
200 kV pulse modulator for power supply of VEPP-5 injection complex electron gun
von: Akimov, V.E., et al.
Veröffentlicht: (2004) -
Electron-optical system of 200 kV gun for the VEPP-5 preinjector
von: Akimov, V.E., et al.
Veröffentlicht: (2004) -
200 kV pulse generator for a power supply of the electron gun for the complex VEPP-5 preinjector
von: Akimov, V.E., et al.
Veröffentlicht: (1999) -
Solid state switch based pulsers for the injection system of the collider VEPP-2000
von: Grishanov, B.I., et al.
Veröffentlicht: (2004) -
Pulse modulators for the VEPP-5 injection complex klystron power supply
von: Akimov, A.V., et al.
Veröffentlicht: (2001)