Clipper circuit of pulse modulator used for Klystron-5045 power supply
While the operation of modulator to the pulsed transformer of klystron-5045, current through the primary winding of the pulse transformer (PT) continues to flow even upon the end of the klystron voltage operating pulse. This is determined by an energy stored in magnetizing inductance. The prolongati...
Gespeichert in:
| Veröffentlicht in: | Вопросы атомной науки и техники |
|---|---|
| Datum: | 2001 |
| Hauptverfasser: | Akimov, A.V., Kazarezov, I.V. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2001
|
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/79017 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Clipper circuit of pulse modulator used for Klystron-5045 power supply / A.V. Akimov, I.V. Kazarezov // Вопросы атомной науки и техники. — 2001. — № 5. — С. 122-124. — Бібліогр.: 2 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Matching of pulse forming network and pulse transformer parameters in pulse modulator circuits for a klystron power supply
von: Kazarezov, I.V., et al.
Veröffentlicht: (1999)
von: Kazarezov, I.V., et al.
Veröffentlicht: (1999)
Pulse modulators for the VEPP-5 injection complex klystron power supply
von: Akimov, A.V., et al.
Veröffentlicht: (2001)
von: Akimov, A.V., et al.
Veröffentlicht: (2001)
Modulator based on K15-10 capacitors for a power supply of the KIU-12 klystron
von: Akimov, V.E., et al.
Veröffentlicht: (1999)
von: Akimov, V.E., et al.
Veröffentlicht: (1999)
200 kV pulse modulator for power supply of VEPP-5 injection complex electron gun
von: Akimov, V.E., et al.
Veröffentlicht: (2004)
von: Akimov, V.E., et al.
Veröffentlicht: (2004)
Modulator power supply for 200 kV electron gun of the VEPP-5 injection complex
von: Akimov, A.V., et al.
Veröffentlicht: (2004)
von: Akimov, A.V., et al.
Veröffentlicht: (2004)
200 kV pulse generator for a power supply of the electron gun for the complex VEPP-5 preinjector
von: Akimov, V.E., et al.
Veröffentlicht: (1999)
von: Akimov, V.E., et al.
Veröffentlicht: (1999)
Hard tube pulser for 150 MW klystron
von: Bak, P.A., et al.
Veröffentlicht: (1999)
von: Bak, P.A., et al.
Veröffentlicht: (1999)
INVESTIGATION OF A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER WITH DIFFERENT INDUCTOR POWER SUPPLY CIRCUITS
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)
von: Bolyukh, V. F., et al.
Veröffentlicht: (2018)
The system of constant current focus klystron KIU-37 master pulsed microwave generator electron linear accelerator
von: Beloglazov, V.I., et al.
Veröffentlicht: (2015)
von: Beloglazov, V.I., et al.
Veröffentlicht: (2015)
Forinjector VEPP-5 klystron gallery control system
von: Aleshaev, A.N., et al.
Veröffentlicht: (1999)
von: Aleshaev, A.N., et al.
Veröffentlicht: (1999)
Vacuum system of klystron repair facility for electron accelerators
von: Dronov, R.M., et al.
Veröffentlicht: (2021)
von: Dronov, R.M., et al.
Veröffentlicht: (2021)
Stady of the characteristics of barrier flat ozonizer with the use of pulse supply
von: Krasnyj, V.V., et al.
Veröffentlicht: (2005)
von: Krasnyj, V.V., et al.
Veröffentlicht: (2005)
Power supply for pulse electric discharge technology in water treatment
von: I. V. Bozhko, et al.
Veröffentlicht: (2014)
von: I. V. Bozhko, et al.
Veröffentlicht: (2014)
Ozone generator based on surface dielectric barrier discharge with pulse power supply
von: Lozina, A.S., et al.
Veröffentlicht: (2023)
von: Lozina, A.S., et al.
Veröffentlicht: (2023)
Pulse power supply for microresistance welding with the link of power regulation in continuous mode
von: Ye. V. Verbytskyi, et al.
Veröffentlicht: (2018)
von: Ye. V. Verbytskyi, et al.
Veröffentlicht: (2018)
Double-circuit resonant electric power amplifier for magnetic-pulse processing of metals
von: Yu. V. Batygin, et al.
Veröffentlicht: (2022)
von: Yu. V. Batygin, et al.
Veröffentlicht: (2022)
Improvement of the power supply to increase the energy efficiency of pulse barrier discharge
von: O. V. Blaha, et al.
Veröffentlicht: (2014)
von: O. V. Blaha, et al.
Veröffentlicht: (2014)
Investigation of plate-type barrier ozonizers with ac and pulse power supplies
von: Krasnji, V.V., et al.
Veröffentlicht: (2002)
von: Krasnji, V.V., et al.
Veröffentlicht: (2002)
Circuitry of power supplies for pulsed arc welding with chaotic current oscillations
von: V. N. Sidorets, et al.
Veröffentlicht: (2014)
von: V. N. Sidorets, et al.
Veröffentlicht: (2014)
EQUATIONS OF ELECTRIC MOTOR POWER SUPPLY UNIT DISSYMMETRY UNDER PHASE SHORT-CIRCUIT FAULT
von: Chaban, V. Y., et al.
Veröffentlicht: (2013)
von: Chaban, V. Y., et al.
Veröffentlicht: (2013)
Analysis of the stability of a pulse power supply for micro resistance welding
von: V. O. Didenko, et al.
Veröffentlicht: (2018)
von: V. O. Didenko, et al.
Veröffentlicht: (2018)
Synthesis of electrical circuits with capacitive energy storages in semiconductor formers of power discharge pulses
von: A. A. Shcherba, et al.
Veröffentlicht: (2014)
von: A. A. Shcherba, et al.
Veröffentlicht: (2014)
CONCEPT OF CONSTRUCTION OF POWER CIRCUITS OF A MULTILEVEL MODULAR CONVERTER AND ITS TRANSISTOR MODULES
von: Zhemerov, George G., et al.
Veröffentlicht: (2018)
von: Zhemerov, George G., et al.
Veröffentlicht: (2018)
Research of the composition of oxide layer and corn of the klystron cathodes with different degree of development
von: Vangha, S.O., et al.
Veröffentlicht: (2019)
von: Vangha, S.O., et al.
Veröffentlicht: (2019)
EQUATIONS OF ELECTRIC MOTOR POWER SUPPLY UNIT DISSYMMETRY UNDER PHASE-TO-PHASE SHORT-CIRCUIT FAULT
von: Chaban, V. Y., et al.
Veröffentlicht: (2013)
von: Chaban, V. Y., et al.
Veröffentlicht: (2013)
200 keV electron beam pulse source for the complex VEPP-5 preinjector
von: Akimov, V.E., et al.
Veröffentlicht: (2001)
von: Akimov, V.E., et al.
Veröffentlicht: (2001)
Energy characteristics of the electromagnetic vibration drive with pulse power supply of vibrator coils
von: O. O. Cherno, et al.
Veröffentlicht: (2023)
von: O. O. Cherno, et al.
Veröffentlicht: (2023)
Structure of polycrystalline diamond coatings deposited by СVD method in the plasma of glow discharge with the use of pulse power supply
von: Koshevoy, K.I., et al.
Veröffentlicht: (2021)
von: Koshevoy, K.I., et al.
Veröffentlicht: (2021)
Averaging of pulse converter model with second degree circuit
von: Ju. V. Rudenko, et al.
Veröffentlicht: (2018)
von: Ju. V. Rudenko, et al.
Veröffentlicht: (2018)
The use of network of power supply for construction of the informative systems
von: A. I. Semenko, et al.
Veröffentlicht: (2006)
von: A. I. Semenko, et al.
Veröffentlicht: (2006)
Study of the dependence of the characteristics of the pulse negative corona on the parameters of the combined high voltage power supply
von: Taran, G.V., et al.
Veröffentlicht: (2023)
von: Taran, G.V., et al.
Veröffentlicht: (2023)
Features of Transients in a Series RLC-Circuit with the Sinusoidal Power Supply and Reversing of Capacity In Modes Close to a Resonance
von: N. A. Shydlovska
Veröffentlicht: (2013)
von: N. A. Shydlovska
Veröffentlicht: (2013)
Intellectual Memory System with the Partitioned Modules on FPGA and Ring-bus Circuits
von: A. V. Palagin, et al.
Veröffentlicht: (2017)
von: A. V. Palagin, et al.
Veröffentlicht: (2017)
Development of a pulse solenoid of magnetic field amplitude up to 0.5 T and a pulse sinusoidal current generator for its power supply
von: Reshetnyak, N.G., et al.
Veröffentlicht: (2020)
von: Reshetnyak, N.G., et al.
Veröffentlicht: (2020)
Simulation of electromagnetic processes in the circuit of magnetic semiconductor generator of the direct pulses
von: V. I. Zozulev, et al.
Veröffentlicht: (2015)
von: V. I. Zozulev, et al.
Veröffentlicht: (2015)
Analysis of heat supply circuits with two heat pumps, using ventilation and air emissions, heated by water produced by crystallization
von: I. I. Pukhovyi, et al.
Veröffentlicht: (2014)
von: I. I. Pukhovyi, et al.
Veröffentlicht: (2014)
Construction of output voltage modulation for power supply with non-linear output transformer by the reduced order mathematical model
von: T. V. Mysak
Veröffentlicht: (2017)
von: T. V. Mysak
Veröffentlicht: (2017)
Electroslag melting of titanium ingots at pulsed electric supply
von: I. V. Protokovilov, et al.
Veröffentlicht: (2014)
von: I. V. Protokovilov, et al.
Veröffentlicht: (2014)
Mitigating interference in dynamic spectra in the presence of powerful signals. Part 1. Powerful broadband pulses and linear frequency-modulated interference
von: V. B. Ryabov, et al.
Veröffentlicht: (2024)
von: V. B. Ryabov, et al.
Veröffentlicht: (2024)
MITIGATING INTERFERENCE IN DYNAMIC SPECTRA IN THE PRESENCE OF POWERFUL SIGNALS. Part 1. POWERFUL BROADBAND PULSES AND LINEAR FREQUENCY-MODULATED INTERFERENCE
von: Ryabov, V. B., et al.
Veröffentlicht: (2024)
von: Ryabov, V. B., et al.
Veröffentlicht: (2024)
Ähnliche Einträge
-
Matching of pulse forming network and pulse transformer parameters in pulse modulator circuits for a klystron power supply
von: Kazarezov, I.V., et al.
Veröffentlicht: (1999) -
Pulse modulators for the VEPP-5 injection complex klystron power supply
von: Akimov, A.V., et al.
Veröffentlicht: (2001) -
Modulator based on K15-10 capacitors for a power supply of the KIU-12 klystron
von: Akimov, V.E., et al.
Veröffentlicht: (1999) -
200 kV pulse modulator for power supply of VEPP-5 injection complex electron gun
von: Akimov, V.E., et al.
Veröffentlicht: (2004) -
Modulator power supply for 200 kV electron gun of the VEPP-5 injection complex
von: Akimov, A.V., et al.
Veröffentlicht: (2004)