Analog computation of transients in the power amplifier of DTL RF system

Some peculiarities of DTL pulse RF system operation are connected with its load – a high quality factor cavity.
 In case of coinciding of tank and feeder frequencies overvoltages may appear at the falling edge of RF pulse in the
 power amplifier anode-grid cavity. In the paper by mea...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Вопросы атомной науки и техники
Datum:2004
ISSN:1562-6016
1. Verfasser: Kvasha, A.I.
Format: Artikel
Sprache:Englisch
Veröffentlicht: Національний науковий центр «Харківський фізико-технічний інститут» НАН України 2004
Schlagworte:
Online Zugang:https://nasplib.isofts.kiev.ua/handle/123456789/79350
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:Analog computation of transients in the power amplifier of DTL RF system / A.I. Kvasha // Вопросы атомной науки и техники. — 2004. — № 2. — С. 81-83. — Бібліогр.: 4 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine
Beschreibung
Zusammenfassung:Some peculiarities of DTL pulse RF system operation are connected with its load – a high quality factor cavity.
 In case of coinciding of tank and feeder frequencies overvoltages may appear at the falling edge of RF pulse in the
 power amplifier anode-grid cavity. In the paper by means of program Micro-Cap V an influence of the RF system at
 an overvoltage value is investigated. Особливості роботи систем імпульсного ВЧ живлення резонаторів із трубками дрейфу обумовлені
 високою добротністю останніх. У випадку збігу власної частоти резонатора з однієї з фідерних частот в анодному контурі підсилювача можуть виникати неприпустимі перенапруги. У роботі за допомогою
 програми Micro-Cap V досліджується вплив параметрів схеми ВЧ живлення на величини перенапруг. Особенности работы систем импульсного ВЧ питания резонаторов с трубками дрейфа обусловлены вы-
 сокой добротностью последних. В случае совпадения собственной частоты резонатора с одной из фидерных
 частот в анодном контуре усилителя могут возникать недопустимые перенапряжения. В работе с помощью
 программы Micro-Cap V исследуется влияние параметров схемы ВЧ питания на величины перенапряжений.
ISSN:1562-6016