The use of series BA permanent magnets in steerers of the beam extracted from the electron linac
Relying on the results of test bench simulation and magnetic measurements, barium plates BA (typical size is
 180x80x16 mm) were used to manufacture “dipole magnet”-type units with a constant field of intensity up to
 1.8 kOe in the working gap of 3 to 3.5 cm in height. The operating...
Saved in:
| Published in: | Вопросы атомной науки и техники |
|---|---|
| Date: | 2004 |
| Main Authors: | Dovbnya, A.N., Myakushko, L.K., Tolstoj, A.E., Shendrik, V.A. |
| Format: | Article |
| Language: | English |
| Published: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2004
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/79355 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | The use of series BA permanent magnets in steerers of the beam extracted from the electron linac / A.N. Dovbnya, L.K. Myakushko, A.E. Tolstoj, V.A. Shendrik // Вопросы атомной науки и техники. — 2004. — № 2. — С. 93-95. — Бібліогр.: 4 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Formation of uniform electron beams on large-area targets
by: Dovbnya, A.N., et al.
Published: (2004)
by: Dovbnya, A.N., et al.
Published: (2004)
Carbon-carbon windows, intended for extraction of electron-and proton beams from accelerators into atmosphere
by: Kovpik, O.F., et al.
Published: (2004)
by: Kovpik, O.F., et al.
Published: (2004)
The injector of high power electron linac for industrial application
by: Ayzatsky, M.I., et al.
Published: (2004)
by: Ayzatsky, M.I., et al.
Published: (2004)
Accelerating structure of 10 MEV electron linac
by: Zavadtsev, A.A., et al.
Published: (2004)
by: Zavadtsev, A.A., et al.
Published: (2004)
The RF system for RFQ-injector of LINAC-20
by: Kuzmichev, V.G., et al.
Published: (2013)
by: Kuzmichev, V.G., et al.
Published: (2013)
RFQ as a second section of front end of ion linac
by: Plastun, A.S.
Published: (2013)
by: Plastun, A.S.
Published: (2013)
Исследование сверхпроводящего резонатора ускорителя e-LINAC
by: Болгов, Р.О., et al.
Published: (2012)
by: Болгов, Р.О., et al.
Published: (2012)
RF quadrupole focusing drift tube linac RF design
by: Plastun, A.S., et al.
Published: (2012)
by: Plastun, A.S., et al.
Published: (2012)
Multi-channel electronics for secondary emission grid profile monitor of TTF linac
by: Reingardt-Nikoulin, P., et al.
Published: (2004)
by: Reingardt-Nikoulin, P., et al.
Published: (2004)
Beam transport system selection on the accelerator LU-10
by: Dovbnya, A.N., et al.
Published: (2013)
by: Dovbnya, A.N., et al.
Published: (2013)
High voltage modulators based on solid-state elements for linacs (review)
by: Beloglazov, V.I., et al.
Published: (2004)
by: Beloglazov, V.I., et al.
Published: (2004)
Investigation of stability electron beam parameters in sources with cold secondary-emission cathodes
by: Dovbnya, A.N., et al.
Published: (2004)
by: Dovbnya, A.N., et al.
Published: (2004)
Remote control system for H-minus ions source of INR LINAC
by: Volodkevich, O.M., et al.
Published: (2013)
by: Volodkevich, O.M., et al.
Published: (2013)
Increase of the RF pulse width in the cavities of the main part of MMF linac
by: Leontiev, V.N., et al.
Published: (2004)
by: Leontiev, V.N., et al.
Published: (2004)
Monitoring position of the electron beam in the air
by: Boriskin, V.N., et al.
Published: (2004)
by: Boriskin, V.N., et al.
Published: (2004)
Investigation of the hollow beam structure on optical transition radiaton
by: Ayzatsky, M.I., et al.
Published: (2004)
by: Ayzatsky, M.I., et al.
Published: (2004)
On possibilities of diagnostics and formation of picosecond electron bunches in the linear accelerator by means of an optical deflector
by: Dyomin, V.S., et al.
Published: (2004)
by: Dyomin, V.S., et al.
Published: (2004)
Investigation of the hollow beam structure on optical transition radiaton
by: Ayzatsky, M.I., et al.
Published: (2004)
by: Ayzatsky, M.I., et al.
Published: (2004)
Multichannel system for research of secondary emission pulse electron beam generation
by: Ayzatsky, N.I., et al.
Published: (2004)
by: Ayzatsky, N.I., et al.
Published: (2004)
Non-destructive beam cross-section detector at the MMFL LEBT
by: Esin, S.K, et al.
Published: (2004)
by: Esin, S.K, et al.
Published: (2004)
Measurements of LET spectra of the JINR phasotron radiotherapy proton beam
by: Kubančák, J., et al.
Published: (2013)
by: Kubančák, J., et al.
Published: (2013)
Electron beam emittance measurement at storage ring with internal target
by: Bashmakov, Yu A., et al.
Published: (2012)
by: Bashmakov, Yu A., et al.
Published: (2012)
Surface wave plasma source for broad-beam ion and electron production
by: Azarenkov, N.A., et al.
Published: (2004)
by: Azarenkov, N.A., et al.
Published: (2004)
Approximations of operating characteristics of the elliptic cross-section beam position monitors
by: Ivashchenko, V.E., et al.
Published: (2004)
by: Ivashchenko, V.E., et al.
Published: (2004)
Investigation of system for external injection of H⁻ ion beam on cyclotrons
by: Veresov, O.L., et al.
Published: (2004)
by: Veresov, O.L., et al.
Published: (2004)
Study of electron beam energy conversion at gyrocon–linear accelerator facility
by: Karliner, M.M., et al.
Published: (2004)
by: Karliner, M.M., et al.
Published: (2004)
Measurement of phase-energy electron distribution at the RF gun exit using alfa-magnet
by: Kushnir, V.A., et al.
Published: (2004)
by: Kushnir, V.A., et al.
Published: (2004)
On creation of a cathode units for the X -band klystron using a high-current magnetron gun as a base
by: Dovbnya, A.N., et al.
Published: (2004)
by: Dovbnya, A.N., et al.
Published: (2004)
UHF–load
by: Dovbnya, A.N., et al.
Published: (2004)
by: Dovbnya, A.N., et al.
Published: (2004)
Investigation of the ceramic windows used in linear electron accelerators of the NSC KIPT
by: Dovbnya, A.N., et al.
Published: (2004)
by: Dovbnya, A.N., et al.
Published: (2004)
Research surface resistance of copper normal and abnormal skin-effects depending on the frequency of electromagnetic field
by: Kutovyi, V.A., et al.
Published: (2013)
by: Kutovyi, V.A., et al.
Published: (2013)
Development of new elements of automated control systems linear accelerator
by: Boriskin, V.N., et al.
Published: (2013)
by: Boriskin, V.N., et al.
Published: (2013)
Modeling and forming the magnetic field of the heavy ion cyclotron
by: Alenitsky, Yu.G., et al.
Published: (2004)
by: Alenitsky, Yu.G., et al.
Published: (2004)
Development of alternatives for accelerating structure in the range of intermediate proton energy
by: Bomko, V.A., et al.
Published: (2004)
by: Bomko, V.A., et al.
Published: (2004)
Experimental study of injector based on the spark source with titanium cathode saturated with hydrogen
by: Vasiliev, A.A., et al.
Published: (2004)
by: Vasiliev, A.A., et al.
Published: (2004)
7 Tesla 17-pole superconducting wiggler for BESSY-II
by: Khrushchev, S.V., et al.
Published: (2004)
by: Khrushchev, S.V., et al.
Published: (2004)
Cylindrical wiggler based on the solenoid loaded with different magnetic properties rings
by: Kopiychenko, D.Yu., et al.
Published: (2004)
by: Kopiychenko, D.Yu., et al.
Published: (2004)
Electron injector based on resonance system with evanescent oscillations
by: Ayzatsky, M.I., et al.
Published: (2004)
by: Ayzatsky, M.I., et al.
Published: (2004)
Application of software and hardware components of CAN-technology for accelerator control
by: Chepurnov, A., et al.
Published: (2004)
by: Chepurnov, A., et al.
Published: (2004)
Numerical study of the centre region acceleration for the RIC-30 cyclotron
by: Andreeva, Z.A., et al.
Published: (2004)
by: Andreeva, Z.A., et al.
Published: (2004)
Similar Items
-
Formation of uniform electron beams on large-area targets
by: Dovbnya, A.N., et al.
Published: (2004) -
Carbon-carbon windows, intended for extraction of electron-and proton beams from accelerators into atmosphere
by: Kovpik, O.F., et al.
Published: (2004) -
The injector of high power electron linac for industrial application
by: Ayzatsky, M.I., et al.
Published: (2004) -
Accelerating structure of 10 MEV electron linac
by: Zavadtsev, A.A., et al.
Published: (2004) -
The RF system for RFQ-injector of LINAC-20
by: Kuzmichev, V.G., et al.
Published: (2013)