Improved characteristics of HV pulse modulators for technological accelerators
The new modulator series intended to provide a pulse power supply of MI-451, MI-456 microwave magnetrons is described. The main feature of this modulator series, as compared with the existing national counterparts, is the storage charging power supply. The offered modulators with improved charging...
Gespeichert in:
| Veröffentlicht in: | Вопросы атомной науки и техники |
|---|---|
| Datum: | 2004 |
| Hauptverfasser: | Dolgov, A., Kildisheva, O. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2004
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/79358 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Improved characteristics of HV pulse modulators for technological accelerators / A. Dolgov, O. Kildisheva // Вопросы атомной науки и техники. — 2004. — № 2. — С. 102-104. — Бібліогр.: 4 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Characteristics of inhomogeneous accelerating structures
von: Ayzatsky, M.I., et al.
Veröffentlicht: (2004)
von: Ayzatsky, M.I., et al.
Veröffentlicht: (2004)
Electrodynamic characteristics of high current IH-accelerating structure
von: Toporkov, S.E., et al.
Veröffentlicht: (2013)
von: Toporkov, S.E., et al.
Veröffentlicht: (2013)
Application of software and hardware components of CAN-technology for accelerator control
von: Chepurnov, A., et al.
Veröffentlicht: (2004)
von: Chepurnov, A., et al.
Veröffentlicht: (2004)
200 kV pulse modulator for power supply of VEPP-5 injection complex electron gun
von: Akimov, V.E., et al.
Veröffentlicht: (2004)
von: Akimov, V.E., et al.
Veröffentlicht: (2004)
Design of accelerating cavities for UNDULAC
von: Polozov, S.M., et al.
Veröffentlicht: (2012)
von: Polozov, S.M., et al.
Veröffentlicht: (2012)
Numerical modelling of multibeam accelerating structures
von: Gavrilov, N.M., et al.
Veröffentlicht: (2004)
von: Gavrilov, N.M., et al.
Veröffentlicht: (2004)
Accelerating structure of 10 MEV electron linac
von: Zavadtsev, A.A., et al.
Veröffentlicht: (2004)
von: Zavadtsev, A.A., et al.
Veröffentlicht: (2004)
Solid ion accelerator based on magnetron sputtering discharge
von: Azarenkov, N.A., et al.
Veröffentlicht: (2004)
von: Azarenkov, N.A., et al.
Veröffentlicht: (2004)
Waveguide channel for TNK linear accelerator–injector
von: Chernov, K.N., et al.
Veröffentlicht: (2004)
von: Chernov, K.N., et al.
Veröffentlicht: (2004)
Calculation of thermal transient condition in the biperiodic accelerating structure
von: Zavadtsev, D.A.
Veröffentlicht: (2004)
von: Zavadtsev, D.A.
Veröffentlicht: (2004)
Numerical study of the centre region acceleration for the RIC-30 cyclotron
von: Andreeva, Z.A., et al.
Veröffentlicht: (2004)
von: Andreeva, Z.A., et al.
Veröffentlicht: (2004)
Development of new elements of automated control systems linear accelerator
von: Boriskin, V.N., et al.
Veröffentlicht: (2013)
von: Boriskin, V.N., et al.
Veröffentlicht: (2013)
Development of alternatives for accelerating structure in the range of intermediate proton energy
von: Bomko, V.A., et al.
Veröffentlicht: (2004)
von: Bomko, V.A., et al.
Veröffentlicht: (2004)
Multipacting simulation in input power couplers of electron linear accelerator
von: Gusarova, M.A., et al.
Veröffentlicht: (2013)
von: Gusarova, M.A., et al.
Veröffentlicht: (2013)
Study of electron beam energy conversion at gyrocon–linear accelerator facility
von: Karliner, M.M., et al.
Veröffentlicht: (2004)
von: Karliner, M.M., et al.
Veröffentlicht: (2004)
Experimental study of accelerating field distribution optimization in the H-structure with comb holders
von: Bryzgalov, G.A., et al.
Veröffentlicht: (2004)
von: Bryzgalov, G.A., et al.
Veröffentlicht: (2004)
High voltage modulators based on solid-state elements for linacs (review)
von: Beloglazov, V.I., et al.
Veröffentlicht: (2004)
von: Beloglazov, V.I., et al.
Veröffentlicht: (2004)
Disk Loaded Waveguide parameters for acceleration of particles with intermediate mass in the medium energy range
von: Paramonov, V.V.
Veröffentlicht: (2013)
von: Paramonov, V.V.
Veröffentlicht: (2013)
Multichannel system for research of secondary emission pulse electron beam generation
von: Ayzatsky, N.I., et al.
Veröffentlicht: (2004)
von: Ayzatsky, N.I., et al.
Veröffentlicht: (2004)
Modulator power supply for 200 kV electron gun of the VEPP-5 injection complex
von: Akimov, A.V., et al.
Veröffentlicht: (2004)
von: Akimov, A.V., et al.
Veröffentlicht: (2004)
Increase of the RF pulse width in the cavities of the main part of MMF linac
von: Leontiev, V.N., et al.
Veröffentlicht: (2004)
von: Leontiev, V.N., et al.
Veröffentlicht: (2004)
Approximations of operating characteristics of the elliptic cross-section beam position monitors
von: Ivashchenko, V.E., et al.
Veröffentlicht: (2004)
von: Ivashchenko, V.E., et al.
Veröffentlicht: (2004)
RF power supply system of industry irradiation facility
von: Gavich, V.T., et al.
Veröffentlicht: (2004)
von: Gavich, V.T., et al.
Veröffentlicht: (2004)
Monitoring position of the electron beam in the air
von: Boriskin, V.N., et al.
Veröffentlicht: (2004)
von: Boriskin, V.N., et al.
Veröffentlicht: (2004)
Higher-order modes damping in 800 MHz superconducting cavity
von: Sobenin, N.P., et al.
Veröffentlicht: (2013)
von: Sobenin, N.P., et al.
Veröffentlicht: (2013)
Hysteresis effects in electron guns
von: Agafonov, A.V., et al.
Veröffentlicht: (2004)
von: Agafonov, A.V., et al.
Veröffentlicht: (2004)
Investigation of system for external injection of H⁻ ion beam on cyclotrons
von: Veresov, O.L., et al.
Veröffentlicht: (2004)
von: Veresov, O.L., et al.
Veröffentlicht: (2004)
Surface wave plasma source for broad-beam ion and electron production
von: Azarenkov, N.A., et al.
Veröffentlicht: (2004)
von: Azarenkov, N.A., et al.
Veröffentlicht: (2004)
Formation of uniform electron beams on large-area targets
von: Dovbnya, A.N., et al.
Veröffentlicht: (2004)
von: Dovbnya, A.N., et al.
Veröffentlicht: (2004)
Research surface resistance of copper normal and abnormal skin-effects depending on the frequency of electromagnetic field
von: Kutovyi, V.A., et al.
Veröffentlicht: (2013)
von: Kutovyi, V.A., et al.
Veröffentlicht: (2013)
The use of series BA permanent magnets in steerers of the beam extracted from the electron linac
von: Dovbnya, A.N., et al.
Veröffentlicht: (2004)
von: Dovbnya, A.N., et al.
Veröffentlicht: (2004)
RFQ as a second section of front end of ion linac
von: Plastun, A.S.
Veröffentlicht: (2013)
von: Plastun, A.S.
Veröffentlicht: (2013)
RF photogun and Cherenkov decelerating system for a high power radiation source in sub-mm region
von: Bashmakov, Yu.A., et al.
Veröffentlicht: (2012)
von: Bashmakov, Yu.A., et al.
Veröffentlicht: (2012)
Analog computation of transients in the power amplifier of DTL RF system
von: Kvasha, A.I.
Veröffentlicht: (2004)
von: Kvasha, A.I.
Veröffentlicht: (2004)
Multi-channel electronics for secondary emission grid profile monitor of TTF linac
von: Reingardt-Nikoulin, P., et al.
Veröffentlicht: (2004)
von: Reingardt-Nikoulin, P., et al.
Veröffentlicht: (2004)
UHF–load
von: Dovbnya, A.N., et al.
Veröffentlicht: (2004)
von: Dovbnya, A.N., et al.
Veröffentlicht: (2004)
Investigation of the hollow beam structure on optical transition radiaton
von: Ayzatsky, M.I., et al.
Veröffentlicht: (2004)
von: Ayzatsky, M.I., et al.
Veröffentlicht: (2004)
Investigation of stability electron beam parameters in sources with cold secondary-emission cathodes
von: Dovbnya, A.N., et al.
Veröffentlicht: (2004)
von: Dovbnya, A.N., et al.
Veröffentlicht: (2004)
RF quadrupole focusing drift tube linac RF design
von: Plastun, A.S., et al.
Veröffentlicht: (2012)
von: Plastun, A.S., et al.
Veröffentlicht: (2012)
Measurements of LET spectra of the JINR phasotron radiotherapy proton beam
von: Kubančák, J., et al.
Veröffentlicht: (2013)
von: Kubančák, J., et al.
Veröffentlicht: (2013)
Ähnliche Einträge
-
Characteristics of inhomogeneous accelerating structures
von: Ayzatsky, M.I., et al.
Veröffentlicht: (2004) -
Electrodynamic characteristics of high current IH-accelerating structure
von: Toporkov, S.E., et al.
Veröffentlicht: (2013) -
Application of software and hardware components of CAN-technology for accelerator control
von: Chepurnov, A., et al.
Veröffentlicht: (2004) -
200 kV pulse modulator for power supply of VEPP-5 injection complex electron gun
von: Akimov, V.E., et al.
Veröffentlicht: (2004) -
Design of accelerating cavities for UNDULAC
von: Polozov, S.M., et al.
Veröffentlicht: (2012)