Formation of a sequence chains of nanosecond ion bunches for injection in a linear accelerator
Currently there are generators of intense ion beams of nanosecond duration. For the purpose of the injection such ions into a linear accelerator the formation of a sequence ~10² ion bunches of a duration of 20 ns, a current of ~100 mA total current pulse duration of about 1 μs is considered in this...
Saved in:
| Published in: | Вопросы атомной науки и техники |
|---|---|
| Date: | 2014 |
| Main Authors: | , , , , |
| Format: | Article |
| Language: | English |
| Published: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2014
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/79982 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Formation of a sequence chains of nanosecond ion bunches for injection in a linear accelerator / V.I. Butenko, A.M. Yegorov, B.I. Ivanov, V.P. Prishchepov, N.G. Shulika // Вопросы атомной науки и техники. — 2014. — № 3. — С. 13-15. — Бібліогр.: 5 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of Ukraine| _version_ | 1859975045905907712 |
|---|---|
| author | Butenko, V.I. Yegorov, A.M. Ivanov, B.I. Prishchepov, V.P. Shulika, N.G. |
| author_facet | Butenko, V.I. Yegorov, A.M. Ivanov, B.I. Prishchepov, V.P. Shulika, N.G. |
| citation_txt | Formation of a sequence chains of nanosecond ion bunches for injection in a linear accelerator / V.I. Butenko, A.M. Yegorov, B.I. Ivanov, V.P. Prishchepov, N.G. Shulika // Вопросы атомной науки и техники. — 2014. — № 3. — С. 13-15. — Бібліогр.: 5 назв. — англ. |
| collection | DSpace DC |
| container_title | Вопросы атомной науки и техники |
| description | Currently there are generators of intense ion beams of nanosecond duration. For the purpose of the injection such ions into a linear accelerator the formation of a sequence ~10² ion bunches of a duration of 20 ns, a current of ~100 mA total current pulse duration of about 1 μs is considered in this work. In this case, bunches of highly charged ions (HCI) of aluminum are generated by field emission by applying a voltage of 400 kV, a duration of 50 ns at a block of aluminum emitters, spaced along the axis of the injector. The injector consists of a sequence co-axial emitters, a grounded accelerating grid and a retarding-and-turning grid. Trough the retarding-and-turning grid a current is passed from the current pulse generator, which creates an azimuthal magnetic field directing HTI along the axis. The analytical calculations that determine the parameters and confirming the possibility of the technical realization of such a device are shown.
В настоящее время имеются генераторы интенсивных ионных пучков наносекундной длительности. С целью инжекции таких ионов в линейный ускоритель в данной работе рассмотрено формирование последовательности ~10² ионных сгустков длительностью 20 нс, током ~100 мА в суммарный токовый импульс длительностью ~1 мкс. При этом сгустки высокозарядных ионов алюминия (ВЗИ) генерируются автоэмиссион-ным путем при подаче напряжения 400 кВ, длительностью 50 нс на блок острийных эмиттеров из алюминия, разнесенных в пространстве вдоль оси инжектора. Инжектор состоит из коаксиально расположенных эмиттеров, заземленной ускоряющей сетки и замедляюще-оворотной сетки. Через замедляюще-поворотную сетку пропускается ток от генератора импульсного тока, создающий азимутальное магнитное поле, направляющее ВЗИ вдоль оси. Приведены аналитические расчеты, определяющие параметры и подтверждающие возможность технической реализации подобного устройства.
Наразі є генератори інтенсивних іонних пучків наносекундної тривалості. З метою інжекції таких іонів у лінійний прискорювач у цій роботі розглянуто формування послідовності ~10² іонних згустків тривалістю 20 нс, струмом ~100 мА в сумарний струмовий імпульс тривалістю ~1 мкс. Згустки високозарядних іонів алюмінію (ВЗІ) генеруються автоемісійним шляхом при подачі напруги 400 кВ, тривалістю 50 нс на блок вістрійних емітерів з алюмінію, рознесених у просторі уздовж осі інжектора. Інжектор складається з коаксіально розташованих емітерів, заземленої прискорюючої сітки і сповільнюючо-поворотної сітки. Через сповільнюючо-поворотну сітку пропускається струм від генератора імпульсного струму, що створює азимутальне магнітне поле, яке спрямовує ВЗІ уздовж осі. Наведені аналітичні розрахунки, що визначають параметри й підтверджують можливість технічної реалізації подібного пристрою.
|
| first_indexed | 2025-12-07T16:22:42Z |
| format | Article |
| fulltext |
ISSN 1562-6016. ВАНТ. 2014. №3(91) 13
FORMATION OF A SEQUENCE CHAINS OF NANOSECOND ION
BUNCHES FOR INJECTION IN A LINEAR ACCELERATOR
V.I. Butenko, A.M. Yegorov, B.I. Ivanov, V.P. Prishchepov, N.G. Shulika
National Science Center “Kharkov Institute of Physics and Technology”, Kharkov, Ukraine
E-mail: ivanovbi@kipt.kharkov.ua
Currently there are generators of intense ion beams of nanosecond duration. For the purpose of the injection such
ions into a linear accelerator the formation of a sequence ~102 ion bunches of a duration of 20 ns, a current of
~100 mA total current pulse duration of about 1 μs is considered in this work. In this case, bunches of highly
charged ions (HCI) of aluminum are generated by field emission by applying a voltage of 400 kV, a duration of
50 ns at a block of aluminum emitters, spaced along the axis of the injector. The injector consists of a sequence co-
axial emitters, a grounded accelerating grid and a retarding-and-turning grid. Trough the retarding-and-turning grid a
current is passed from the current pulse generator, which creates an azimuthal magnetic field directing HTI along
the axis. The analytical calculations that determine the parameters and confirming the possibility of the technical
realization of such a device are shown.
PACS: 29.27.Ac
INTRODUCTION
In [1, 2] experiments are described on the generation
of high charged ions (HCI) by applying a pulsed voltage
of 300…400 kV and duration of 50 ns to block of edged
emitters of aluminum.
In this case high-voltage of positive polarity is intro-
duced into the ion source chamber through the bushing
insulator of porcelain. At the end of the high voltage
bushing the block of emitters is placed. Further along
the axis of the system the extracting grounded electrode
is placed. In the experiments the strip emitters of alumi-
num are used, because of their efficiency and good re-
producibility of the results.
Thus the ion beams are formed in a high voltage ac-
celerating diode, the anode of which is represented by
the block of edged emitters, and the cathode – by the
grid consisting of longitudinal metal wires.
The main investigations have been carried out with a
flat block of emitters with area of 16 cm2. This block
has 20 parallel edged emitters of length of 4 cm each.
The emitters operate stably over 103…104 "shots".
Measurements made using the tracking detectors, mag-
netic analyzer, and other. It was showed that the beams
are composed mainly of aluminum ions with a charge
Z = 8 ± 1 and the current 30…35 A. In this case, the
current of 0.4 A corresponds to the emitter length of
1 cm.
The measurements were shown that, according to
theory [3, 4], the generation of high-charge ions is con-
nected with the above-barrier field ionization in super
strong pulse electric fields with intensity E that is more
than 1010 V/cm.
1. THE DEVICE FOR CREATING
THE CHAIN OF IONS
For further acceleration of such bunches the device
is demanded which generates the chain of ion bunches
suitable for insertion into the linear accelerator, i.e. hav-
ing the current of ~100 mA and pulse duration of ~1 μs.
For this purpose the HCI emitters are spaced along the
axis of the injector in the device is being described.
In Fig. 1 the scheme of such injector is shown. It
consists of the coaxial blocks of emitters 1, the ground-
ed accelerating grid 2, the retarding-and-turning grid 3,
and the grounded accelerated electrode 4. On the blocks
of emitters the voltage U1 is applied from the pulse
voltage generator (PVG). Through the retarding- and-
turning grid 3 it is passed the current I, which creates
the turning azimuthal magnetic field from the pulse cur-
rent generator (PCG). The retarding voltage U2 is ap-
plied to it also. The cylindrical accelerating grounded
electrode 4 is placed at the output of the injector.
r2
r1
U1
U2
I
1 2 3 4
Fig. 1. Diagram of the device to create a chain
of ion bunches
The device operates as follows. A voltage pulse is
applied to the block of emitters, under the influence of
which Z-fold positive ions of metal are pulled out from
the emitters and then are accelerated under the influence
of the accelerating electric field to the maximum energy
equal to ZeU1. At the same time, while moving in the
azimuthal pulsed magnetic field produced by the grid 3,
their radial energy begins to pass in the longitudinal
energy. However at so high energy (about 400 keV) the
Larmor radius of the ions is too big and to completely
turn the ions along the system, you need to slow them
down to a lower energy (~4 keV). For this purpose,
pulse voltage is applied on the retarding-and-turning
grid 3 which creates a slowing down electric field be-
tween the grids 2 and 3. Under the influence of this
field, the ions are decelerated to the energy ZeU2 and
fully turning along the system, get into the drift region
within the grid 3. In this region a distance between the
ion bunches is equal to a distance between the emitters.
Next, the ion beam passes through the accelerating gap
between the face of the retarding and turning grid 3 and
the accelerating electrode 4, getting into the drift region
inside it with the energy equal to ZeU1. Thus the dis-
tance between the ion bunches increases in proportion to
the velocity of the beam.
ISSN 1562-6016. ВАНТ. 2014. №3(91) 14
2. CALCULATION OF PARAMETERS
OF THE SYSTEM
Let us find the current I, which must be passed
through the retarding-and-turning grid 3. Let the radii of
the accelerating grid and the retarding-and-turning grid
are r1 and r2, respectively. The accelerating grid is
grounded and the retarding-and-turning grid is under the
voltage U2.
The Lagrangian of the system is written as follows:
2 2
.
2 2
r z
z z
mV mV eL V A eU
c
= + + − (1)
The expression for the scalar potential in the axially
symmetric case is [5]:
0
0 ln2
r
rUU σ−= , (2)
where σ is a linear charge density. A similar expression
can be written for the longitudinal component of the
vector potential:
0
0 ln2
r
r
c
IAA zz −= . (3)
Substituting (1) in the Euler-Lagrange equation with
(2) and (3) and expressing σ by U2, we obtain the equa-
tions of motion of a charged particle in such a system:
z
r AV
dt
dVr −=τ , (4)
r
z AV
dt
dVr = , (5)
where
2
2
c
IA ξ
= ,
1
2
2
ln
r
r
U
ξτ −=
, ξ is a charge to mass ratio,
c is a light velocity. Integrating (5) we obtain an expres-
sion for the longitudinal velocity of the particle:
0
1
ln zz V
r
rAV += , (6)
where Vz0 is an initial longitudinal velocity of a particle
(under r=r1). After the integration of (4) with (6) we
obtain the energy conservation law:
2
0
2
0
1
22 ln2 zrzr VV
r
rVV +=−+ τ , (7)
where Vr0 is an initial radial velocity of a particle (under
r=r1). The current I must be such that the radial velocity
of the particles approached to 0 when r=r2. Assuming
Vr=0 at r=r2, and also taking into account that
1
2
0
2
0
2
0 2 UVVV zr ξ=≡+ is the total initial energy of the
ion (up to a factor of 2/m) and by entering the initial
injection angle α, we find the current which provides a
turn of the beam along the axis of the system:
2
1 2 1
2
1
cos
.
2 ln
U U UcI r
r
α
ξ
− −
=
(8)
The initial injection angle α can be set, for example,
creating an azimuthal magnetic field in the accelerating
gap between the blocks of emitters 1 and the accelerat-
ing grid 2. In the absence of the field (α=-π/2) we ob-
tain:
2
21 2
1
.
2 ln
I c
rU U
r
=
− ξ
(9)
Let us estimate the value of this ratio. Let 1 2 3r r = ,
ξ =
1013 GS units (8-fold aluminum ions). Then
1 2I U U− = 38.2 kA/kV1/2. At I = 100 kA and
U1 = 400 kV the voltage on the retarding-and-turning
grid 3 must be equal to U2 = 393 kV.
6
PVG
PCG
3
4
7
1
5
A
A
2
8
Fig. 2. The injector of multiply charged ions
1 – vacuum chamber; 2 – blocks of emitters; 3 – accel-
erating grid; 4 – retarding-and-turning grid; 5 – re-
verse conductor of the retarding-and-turning grid;
6 – pulse current generator; 7 – pulse voltage generator
On leaving the injector the ion beam enters into the
accelerating electric field, whereby its power rises to
ZeU1 again. The beam density is reduced, respectively,
increases the distance between the bunches. Since the
beam is stationary, then based on the continuity equa-
tion we have:
0=Vdiv
ρ ,
where ρ is a density, V
is a beam velocity. Assuming a
uniform beam cross section and neglecting the trans-
verse velocity we get:
0.z
z
dVd V
dz dz
ρ
+ ρ = (10)
Integrating (10) we find an expression for the densi-
ty of the beam:
1 1 ,z
z
V
V
ρ
ρ = (11)
where ρ1 and Vz1 are a density and a longitudinal ve-
locity of the beam respectively inside the grid 3. This
expression is valid for any density, including those for
the linear density of the beam bunches. If ρ means the
number of bunches per unit length of the beam, then the
distance l between the bunches at the exit of the injector
is:
1
1
1
z
z
V
Vll ==
ρ
, (12)
where 11 1 ρ=l is the distance between the bunches in
the drift region within the grid 3.
The distance l2 between bunches in the accelerating
electrode 4 (at the outlet of the injector) is determined
by the parameters of slow-wave structure of the linear
accelerator and must be equal to the initial wavelength
of the accelerating field. Since the velocity of the beam
at the outlet from the injector Vz2 is equal to initial
phase velocity of the accelerating field, then
ISSN 1562-6016. ВАНТ. 2014. №3(91) 15
2
2 ,zVl
f
= (13)
where f is a frequency of the accelerating field. From
here, using (12), we obtain a similar expression for the
distance between the bunches within the grid 3:
1
1 .zVl
f
= (14)
Since ( )211 2 UUVz −= ξ , then from (11) we finally
have:
( )1 2
1
2
.
U U
l
f
ξ −
= (15)
Obviously, such a distance should be also between
the emitters. When the accelerating field frequency
f=100 MHz, l1=0.63 cm, for generating a train of 100
bunches the total length of the block of emitters must be
respectively 63 cm.
Like that, the analytical calculations determine the
parameters and confirming the possibility of the tech-
nical realization of such a device are shown.
REFERENCES
1. B.I. Ivanov, V.P. Prishchepov. Experimental inves-
tigation of field emission method for high-charge ion
beams generation // Problems of Atomic Science and
Technology. 2012, №3, p. 34-38.
2. V.I. Butenko, A.M. Yegorov, B.I. Ivanov, et al. De-
velopment of field emission injector of high-charged
heavy ion beams // XXIII International Symposium
on Charged Particles Accelerations, Abstract of Pa-
pers. NSC KIPT, Kharkov, 2013, p. 33-34.
3. H.A. Bethe, E.E. Salpeter. Quantum Mechanics of
one- and two-electron atoms. Springer-Verlag, Ber-
lin, 1957, Ch. III. Atoms in external fields.
4. V.P. Krainov, B.M. Smirnov, M.B. Smirnov. Femto-
second-exited cluster beams // Uspekhi Fiz. Nauk,
2007, v. 177, №9, p. 953-981 (in Russian).
5. A.I. Akhiezer. General Physics. Electric and Mag-
netic Phenomenon. Кiev: «Naukova Dumka», 1981.
Article received 02.10.2013
ФОРМИРОВАНИЕ ПОСЛЕДОВАТЕЛЬНЫХ ЦЕПОЧЕК ИОННЫХ НАНОСЕКУНДНЫХ
СГУСТКОВ ДЛЯ ИНЖЕКЦИИ В ЛИНЕЙНЫЙ УСКОРИТЕЛЬ
В.И. Бутенко, А.М. Егоров, Б.И. Иванов, В.П. Прищепов, Н.Г. Шулика
В настоящее время имеются генераторы интенсивных ионных пучков наносекундной длительности. С
целью инжекции таких ионов в линейный ускоритель в данной работе рассмотрено формирование последо-
вательности ~102 ионных сгустков длительностью 20 нс, током ~100 мА в суммарный токовый импульс дли-
тельностью ~1 мкс. При этом сгустки высокозарядных ионов алюминия (ВЗИ) генерируются автоэмиссион-
ным путем при подаче напряжения 400 кВ, длительностью 50 нс на блок острийных эмиттеров из алюминия,
разнесенных в пространстве вдоль оси инжектора. Инжектор состоит из коаксиально расположенных эмит-
теров, заземленной ускоряющей сетки и замедляюще-поворотной сетки. Через замедляюще-поворотную
сетку пропускается ток от генератора импульсного тока, создающий азимутальное магнитное поле, направ-
ляющее ВЗИ вдоль оси. Приведены аналитические расчеты, определяющие параметры и подтверждающие
возможность технической реализации подобного устройства.
ФОРМУВАННЯ ПОСЛІДОВНИХ ЛАНЦЮЖКІВ ІОННИХ НАНОСЕКУНДНИХ ЗГУСТКІВ
ДЛЯ ІНЖЕКЦІЇ В ЛІНІЙНИЙ ПРИСКОРЮВАЧ
В.І. Бутенко, А.М. Єгоров, Б.І. Іванов, В.П. Прищепов, М.Г. Шуліка
Наразі є генератори інтенсивних іонних пучків наносекундної тривалості. З метою інжекції таких іонів у
лінійний прискорювач у цій роботі розглянуто формування послідовності ~102 іонних згустків тривалістю
20 нс, струмом ~100 мА в сумарний струмовий імпульс тривалістю ~1 мкс. Згустки високозарядних іонів
алюмінію (ВЗІ) генеруються автоемісійним шляхом при подачі напруги 400 кВ, тривалістю 50 нс на блок
вістрійних емітерів з алюмінію, рознесених у просторі уздовж осі інжектора. Інжектор складається з коаксі-
ально розташованих емітерів, заземленої прискорюючої сітки і сповільнюючо-поворотної сітки. Через спо-
вільнюючо-поворотну сітку пропускається струм від генератора імпульсного струму, що створює азимута-
льне магнітне поле, яке спрямовує ВЗІ уздовж осі. Наведені аналітичні розрахунки, що визначають парамет-
ри й підтверджують можливість технічної реалізації подібного пристрою.
INTRODUCTION
1. THE DEVICE FOR CREATING THE CHAIN OF IONS
2. CALCULATION OF parameters of the system
REFERENCES
ФОРМИРОВАНИЕ ПОСЛЕДОВАТЕЛЬНЫХ ЦЕПОЧЕК ИОННЫХ НАНОСЕКУНДНЫХ СГУСТКОВ ДЛЯ ИНЖЕКЦИИ В ЛИНЕЙНЫЙ УСКОРИТЕЛЬ
ФОРМУВАННЯ ПОСЛІДОВНиХ ланцюжків іОННиХ НАНОСЕКУНДНиХ зГУСТКіВ ДЛЯ іНЖЕКЦії В ЛіНіЙНиЙ прискорювач
|
| id | nasplib_isofts_kiev_ua-123456789-79982 |
| institution | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| issn | 1562-6016 |
| language | English |
| last_indexed | 2025-12-07T16:22:42Z |
| publishDate | 2014 |
| publisher | Національний науковий центр «Харківський фізико-технічний інститут» НАН України |
| record_format | dspace |
| spelling | Butenko, V.I. Yegorov, A.M. Ivanov, B.I. Prishchepov, V.P. Shulika, N.G. 2015-04-09T13:46:20Z 2015-04-09T13:46:20Z 2014 Formation of a sequence chains of nanosecond ion bunches for injection in a linear accelerator / V.I. Butenko, A.M. Yegorov, B.I. Ivanov, V.P. Prishchepov, N.G. Shulika // Вопросы атомной науки и техники. — 2014. — № 3. — С. 13-15. — Бібліогр.: 5 назв. — англ. 1562-6016 PACS: 29.27.Ac https://nasplib.isofts.kiev.ua/handle/123456789/79982 Currently there are generators of intense ion beams of nanosecond duration. For the purpose of the injection such ions into a linear accelerator the formation of a sequence ~10² ion bunches of a duration of 20 ns, a current of ~100 mA total current pulse duration of about 1 μs is considered in this work. In this case, bunches of highly charged ions (HCI) of aluminum are generated by field emission by applying a voltage of 400 kV, a duration of 50 ns at a block of aluminum emitters, spaced along the axis of the injector. The injector consists of a sequence co-axial emitters, a grounded accelerating grid and a retarding-and-turning grid. Trough the retarding-and-turning grid a current is passed from the current pulse generator, which creates an azimuthal magnetic field directing HTI along the axis. The analytical calculations that determine the parameters and confirming the possibility of the technical realization of such a device are shown. В настоящее время имеются генераторы интенсивных ионных пучков наносекундной длительности. С целью инжекции таких ионов в линейный ускоритель в данной работе рассмотрено формирование последовательности ~10² ионных сгустков длительностью 20 нс, током ~100 мА в суммарный токовый импульс длительностью ~1 мкс. При этом сгустки высокозарядных ионов алюминия (ВЗИ) генерируются автоэмиссион-ным путем при подаче напряжения 400 кВ, длительностью 50 нс на блок острийных эмиттеров из алюминия, разнесенных в пространстве вдоль оси инжектора. Инжектор состоит из коаксиально расположенных эмиттеров, заземленной ускоряющей сетки и замедляюще-оворотной сетки. Через замедляюще-поворотную сетку пропускается ток от генератора импульсного тока, создающий азимутальное магнитное поле, направляющее ВЗИ вдоль оси. Приведены аналитические расчеты, определяющие параметры и подтверждающие возможность технической реализации подобного устройства. Наразі є генератори інтенсивних іонних пучків наносекундної тривалості. З метою інжекції таких іонів у лінійний прискорювач у цій роботі розглянуто формування послідовності ~10² іонних згустків тривалістю 20 нс, струмом ~100 мА в сумарний струмовий імпульс тривалістю ~1 мкс. Згустки високозарядних іонів алюмінію (ВЗІ) генеруються автоемісійним шляхом при подачі напруги 400 кВ, тривалістю 50 нс на блок вістрійних емітерів з алюмінію, рознесених у просторі уздовж осі інжектора. Інжектор складається з коаксіально розташованих емітерів, заземленої прискорюючої сітки і сповільнюючо-поворотної сітки. Через сповільнюючо-поворотну сітку пропускається струм від генератора імпульсного струму, що створює азимутальне магнітне поле, яке спрямовує ВЗІ уздовж осі. Наведені аналітичні розрахунки, що визначають параметри й підтверджують можливість технічної реалізації подібного пристрою. en Національний науковий центр «Харківський фізико-технічний інститут» НАН України Вопросы атомной науки и техники Теория и техника ускорения частиц Formation of a sequence chains of nanosecond ion bunches for injection in a linear accelerator Формирование последовательных цепочек ионных наносекундных сгустков для инжекции в линейный ускоритель Формування послідовних ланцюжків іонних наносекундних згустків для інжекції в лінійний прискорювач Article published earlier |
| spellingShingle | Formation of a sequence chains of nanosecond ion bunches for injection in a linear accelerator Butenko, V.I. Yegorov, A.M. Ivanov, B.I. Prishchepov, V.P. Shulika, N.G. Теория и техника ускорения частиц |
| title | Formation of a sequence chains of nanosecond ion bunches for injection in a linear accelerator |
| title_alt | Формирование последовательных цепочек ионных наносекундных сгустков для инжекции в линейный ускоритель Формування послідовних ланцюжків іонних наносекундних згустків для інжекції в лінійний прискорювач |
| title_full | Formation of a sequence chains of nanosecond ion bunches for injection in a linear accelerator |
| title_fullStr | Formation of a sequence chains of nanosecond ion bunches for injection in a linear accelerator |
| title_full_unstemmed | Formation of a sequence chains of nanosecond ion bunches for injection in a linear accelerator |
| title_short | Formation of a sequence chains of nanosecond ion bunches for injection in a linear accelerator |
| title_sort | formation of a sequence chains of nanosecond ion bunches for injection in a linear accelerator |
| topic | Теория и техника ускорения частиц |
| topic_facet | Теория и техника ускорения частиц |
| url | https://nasplib.isofts.kiev.ua/handle/123456789/79982 |
| work_keys_str_mv | AT butenkovi formationofasequencechainsofnanosecondionbunchesforinjectioninalinearaccelerator AT yegorovam formationofasequencechainsofnanosecondionbunchesforinjectioninalinearaccelerator AT ivanovbi formationofasequencechainsofnanosecondionbunchesforinjectioninalinearaccelerator AT prishchepovvp formationofasequencechainsofnanosecondionbunchesforinjectioninalinearaccelerator AT shulikang formationofasequencechainsofnanosecondionbunchesforinjectioninalinearaccelerator AT butenkovi formirovanieposledovatelʹnyhcepočekionnyhnanosekundnyhsgustkovdlâinžekciivlineinyiuskoritelʹ AT yegorovam formirovanieposledovatelʹnyhcepočekionnyhnanosekundnyhsgustkovdlâinžekciivlineinyiuskoritelʹ AT ivanovbi formirovanieposledovatelʹnyhcepočekionnyhnanosekundnyhsgustkovdlâinžekciivlineinyiuskoritelʹ AT prishchepovvp formirovanieposledovatelʹnyhcepočekionnyhnanosekundnyhsgustkovdlâinžekciivlineinyiuskoritelʹ AT shulikang formirovanieposledovatelʹnyhcepočekionnyhnanosekundnyhsgustkovdlâinžekciivlineinyiuskoritelʹ AT butenkovi formuvannâposlídovnihlancûžkívíonnihnanosekundnihzgustkívdlâínžekcíívlíníiniipriskorûvač AT yegorovam formuvannâposlídovnihlancûžkívíonnihnanosekundnihzgustkívdlâínžekcíívlíníiniipriskorûvač AT ivanovbi formuvannâposlídovnihlancûžkívíonnihnanosekundnihzgustkívdlâínžekcíívlíníiniipriskorûvač AT prishchepovvp formuvannâposlídovnihlancûžkívíonnihnanosekundnihzgustkívdlâínžekcíívlíníiniipriskorûvač AT shulikang formuvannâposlídovnihlancûžkívíonnihnanosekundnihzgustkívdlâínžekcíívlíníiniipriskorûvač |