Cooperative effect of displacement damage and inert gas impurities on deuterium retention in austenitic and ferritic-martensitic steels
The behaviour of hydrogen (deuterium) in austenitic 18Cr10NiTi stainless steel and ferritic/martensitic steels EP-450 and EI-852 were investigated. Energetic heavy-ion irradiation has been used for modeling defect cluster formation under displacement cascade conditions to simulate nuclear-power...
Gespeichert in:
| Veröffentlicht in: | Вопросы атомной науки и техники |
|---|---|
| Datum: | 2014 |
| Hauptverfasser: | Karpov, S.A., Kopanets, I.E., Ruzhytskyi, V.V., Sungurov, B.S., Tolstolutskaya, G.D. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2014
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/80350 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Cooperative effect of displacement damage and inert gas impurities on deuterium retention in austenitic and ferritic-martensitic steels / S.A. Karpov, I.E. Kopanets, V.V. Ruzhytskyi, B.S. Sungurov, G.D. Tolstolutskaya // Вопросы атомной науки и техники. — 2014. — № 4. — С. 31-37. — Бібліогр.: 10 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Тhe dose dependence of inert gases irradiation hardening of 316 austenitic stainless steel after low temperature irradiation
von: Karpov, S.A., et al.
Veröffentlicht: (2018)
von: Karpov, S.A., et al.
Veröffentlicht: (2018)
Effect of argon ion irradiation on hardening and microstructure of ferritic-martensitic steel T91
von: Voyevodin, V.N., et al.
Veröffentlicht: (2019)
von: Voyevodin, V.N., et al.
Veröffentlicht: (2019)
Effect of severe plastic deformation on radiation hardening of T91 ferritic-martensitic steel
von: Voyevodin, V.N., et al.
Veröffentlicht: (2021)
von: Voyevodin, V.N., et al.
Veröffentlicht: (2021)
The effect OF Cr, Cr-N and Cr-Ox coatings on deuterium retention and penetration in zirconium alloy Zr-1Nb
von: Kopanetz, I.E., et al.
Veröffentlicht: (2015)
von: Kopanetz, I.E., et al.
Veröffentlicht: (2015)
Characterization of dislocation type defects formed at low-energy deuterium irradiation of SS316 stainless steel
von: Sungurov, B.S., et al.
Veröffentlicht: (2018)
von: Sungurov, B.S., et al.
Veröffentlicht: (2018)
Strength Improvement of Ferritic/Martensitic T91 Steel by Cross Wedge Rolling at Different Austenitizing Temperatures
von: He, T., et al.
Veröffentlicht: (2017)
von: He, T., et al.
Veröffentlicht: (2017)
Deuterium trapping and sputtering of tungsten coatings exposed to low-energy deuterium plasma
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2020)
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2020)
Damage parameter estimation of the dual ferrite martensite steel on coercive force
von: Usov, V.V., et al.
Veröffentlicht: (2018)
von: Usov, V.V., et al.
Veröffentlicht: (2018)
Effect of argon-ion irradiation on cavity formation and evolution in 18Cr10NiTi austenitic steel
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2020)
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2020)
Ion-implanted deuterium release behavior from Li-based advanced ceramics
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2022)
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2022)
Formation of deformation martensite in the chromium-nickel austenitic steels
von: H. V. Snizhnoi
Veröffentlicht: (2011)
von: H. V. Snizhnoi
Veröffentlicht: (2011)
Peculiarities of laser welding of austenite and austenite-ferrite stainless steels with high manganese content
von: V. Kirots, et al.
Veröffentlicht: (2012)
von: V. Kirots, et al.
Veröffentlicht: (2012)
Peculiarities of saturation with deuterium of vacuum-arc coatings based on iron
von: H. D. Tolstolutska, et al.
Veröffentlicht: (2020)
von: H. D. Tolstolutska, et al.
Veröffentlicht: (2020)
The influence of lead melt on embrittlement of ferritic and austenitic chromium steels
von: V. M. Fedirko, et al.
Veröffentlicht: (2019)
von: V. M. Fedirko, et al.
Veröffentlicht: (2019)
Morphology and sputtering of tungsten nitrides coatings exposed to deuterium plasma
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2023)
von: Tolstolutskaya, G.D., et al.
Veröffentlicht: (2023)
ESR investigation of hydrogen and deuterium atoms in impurity-helium solids
von: Kiselev, S.I., et al.
Veröffentlicht: (2003)
von: Kiselev, S.I., et al.
Veröffentlicht: (2003)
Application of nanoindentation for investigation of radiation damage in SS316 stainless steel
von: Tolmachova, G.N., et al.
Veröffentlicht: (2015)
von: Tolmachova, G.N., et al.
Veröffentlicht: (2015)
Effect of ausforming on mechanical properties of 12%Cr ferritic/martensitic steel
von: Kislyak, I.F., et al.
Veröffentlicht: (2022)
von: Kislyak, I.F., et al.
Veröffentlicht: (2022)
Microfractography of tensile tests surfaces of welded joints of austenitic and ferritic steels
von: B. Nasiłowska, et al.
Veröffentlicht: (2018)
von: B. Nasiłowska, et al.
Veröffentlicht: (2018)
Effect of argon-ion irradiation on cavity formation in 18Cr10NiTi austenitic steel and its strengthened version
von: Kolodiy, I.V., et al.
Veröffentlicht: (2020)
von: Kolodiy, I.V., et al.
Veröffentlicht: (2020)
The influence of the melts of lead and eutectics lead-bithmus on fatigue life of martensitic and austenitic steels
von: O. I. Yaskiv, et al.
Veröffentlicht: (2014)
von: O. I. Yaskiv, et al.
Veröffentlicht: (2014)
The influence of pre-oxidizing on corrosion resistance of ferrite-martensitic steels in a lead melt
von: O. I. Yaskiv, et al.
Veröffentlicht: (2015)
von: O. I. Yaskiv, et al.
Veröffentlicht: (2015)
Temperature dependence of surface topography and deuterium interaction with a pure α-Fe exposed to low-energy high-flux D plasma
von: Nikitin, A.V., et al.
Veröffentlicht: (2016)
von: Nikitin, A.V., et al.
Veröffentlicht: (2016)
Microstructure and Mechanical Properties of an Underwater Wet Welded Dissimilar Ferritic/Austenitic Steel Joint
von: Guo, N., et al.
Veröffentlicht: (2015)
von: Guo, N., et al.
Veröffentlicht: (2015)
Evolution of discrete local levels into an impurity band in solidified inert gas solution
von: Kosevich, A.M., et al.
Veröffentlicht: (2007)
von: Kosevich, A.M., et al.
Veröffentlicht: (2007)
Study of wear of the building-up zone of martensite-austenitic and secondary hardening steels of the Cr-Mn-Ti system
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)
von: Hlushkova, D.B., et al.
Veröffentlicht: (2023)
Modern trends of development of displacing-diffusion theory of austenite recrystallization in iron-carbon alloys
von: K. I. Uzlov
Veröffentlicht: (2017)
von: K. I. Uzlov
Veröffentlicht: (2017)
The influence of lead melts and Pb-Bi eutecticson mechanical properties of 20X13 ferritic-martensitic steel
von: O. I. Yaskiv, et al.
Veröffentlicht: (2012)
von: O. I. Yaskiv, et al.
Veröffentlicht: (2012)
Materials and technological approaches to welding of combined joints between martensitic and austenitic steels used in power machine building (Review)
von: M. O. Nimko, et al.
Veröffentlicht: (2023)
von: M. O. Nimko, et al.
Veröffentlicht: (2023)
Surface morphology and sputtering of FeCrAl coating on steel exposed to low-energy deuterium plasmas
von: Voyevodin, V.N., et al.
Veröffentlicht: (2019)
von: Voyevodin, V.N., et al.
Veröffentlicht: (2019)
Comparative study of helium bubble formation in Cr-Fe-Ni-Mn high-entropy alloy and 18Cr10NiTi steel after irradiation and post-irradiation annealing
von: Kalchenko, А.S., et al.
Veröffentlicht: (2019)
von: Kalchenko, А.S., et al.
Veröffentlicht: (2019)
Atomic oxygen in solid deuterium
von: Danilychev, A.V., et al.
Veröffentlicht: (2000)
von: Danilychev, A.V., et al.
Veröffentlicht: (2000)
Application of hydrogen embritlement models to the blister growth behavior in 12Cr2MoNbVB steel and α -Fe exposed to low-energy D plasma
von: Nikitin, A.V., et al.
Veröffentlicht: (2017)
von: Nikitin, A.V., et al.
Veröffentlicht: (2017)
Behavior of gas impurities in plasma-arc remelting of billet compacted of chips of austenitic stainless steels
von: V. A. Shapovalov, et al.
Veröffentlicht: (2012)
von: V. A. Shapovalov, et al.
Veröffentlicht: (2012)
Optimization of the risk level of net retention in the insurance market
von: O. Kuzmenko, et al.
Veröffentlicht: (2014)
von: O. Kuzmenko, et al.
Veröffentlicht: (2014)
Plasticity of parahydrogen with reduced deuterium contents
von: Alekseeva, L.A.
Veröffentlicht: (2007)
von: Alekseeva, L.A.
Veröffentlicht: (2007)
The Role of Employer Branding Practices on Management of Employee Attraction and Retention
von: Ada, Nesrin, et al.
Veröffentlicht: (2023)
von: Ada, Nesrin, et al.
Veröffentlicht: (2023)
Phase transition in waters with different content of deuterium
von: V. V. Goncharuk, et al.
Veröffentlicht: (2015)
von: V. V. Goncharuk, et al.
Veröffentlicht: (2015)
Modern Approaches to Adaptation and Retention of Staff in the Period of Crisis Transformations in Business
von: N. K. Nazarov, et al.
Veröffentlicht: (2024)
von: N. K. Nazarov, et al.
Veröffentlicht: (2024)
The dependence between chromatographic retention volumes of substances and their physico-chemical properties
von: R. Makitra, et al.
Veröffentlicht: (2013)
von: R. Makitra, et al.
Veröffentlicht: (2013)
Ähnliche Einträge
-
Тhe dose dependence of inert gases irradiation hardening of 316 austenitic stainless steel after low temperature irradiation
von: Karpov, S.A., et al.
Veröffentlicht: (2018) -
Effect of argon ion irradiation on hardening and microstructure of ferritic-martensitic steel T91
von: Voyevodin, V.N., et al.
Veröffentlicht: (2019) -
Effect of severe plastic deformation on radiation hardening of T91 ferritic-martensitic steel
von: Voyevodin, V.N., et al.
Veröffentlicht: (2021) -
The effect OF Cr, Cr-N and Cr-Ox coatings on deuterium retention and penetration in zirconium alloy Zr-1Nb
von: Kopanetz, I.E., et al.
Veröffentlicht: (2015) -
Characterization of dislocation type defects formed at low-energy deuterium irradiation of SS316 stainless steel
von: Sungurov, B.S., et al.
Veröffentlicht: (2018)