Electron guns for technological linear accelerators
The modern technologies based on linear electron accelerator require intensive beams with small particle losses during acceleration. The beam quality at an accelerator exit is mainly determined by an injector and, in particular, by electron gun. In technological accelerators with a high beam intensi...
Gespeichert in:
| Veröffentlicht in: | Вопросы атомной науки и техники |
|---|---|
| Datum: | 1999 |
| ISSN: | 1562-6016 |
| Hauptverfasser: | , , , , , , , , , , , , , , , |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
1999
|
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/81520 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Electron guns for technological linear accelerators / V.I. Beloglasov, E.Z. Biller, V.A. Vishnýakov, L.S. Dovbush, V.F. Zhiglo, L.M. Zavada, V.V. Zakutin, A.I. Kosoy, V.A. Kushnir, V.V. Mitrochenko, L.K. Mýakushko, N.G. Reshetnýak, V.P. Romas'ko, D.L. Stepin, Yu.D. Tur, I.V. Khodak // Вопросы атомной науки и техники. — 1999. — № 4. — С. 29-31. — Бібліогр.: 6 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Zusammenfassung: | The modern technologies based on linear electron accelerator require intensive beams with small particle losses during acceleration. The beam quality at an accelerator exit is mainly determined by an injector and, in particular, by electron gun. In technological accelerators with a high beam intensity the vacuum accidents are over of danger that can cause the cathode poisoning. In these conditions electron gun designs which let in an operational cathode replacement are preferable. Such an approach was selected for providing the technological accelerators created and developed at the R&D "Accelerator" NSC KIPT with electron guns. The calculations of gun optics and beam characteristics have been carried out both analytically and numerically with using the «EGUN» code [1]. Results of development of three guns are below. The hexaboride lanthanum (LaB6), dispensive tungsten emitter impregnated with barium aluminate and covered by an Os-Ir-Al film, was used as cathodes. The gun tests were conducted at special test installations.
|
|---|---|
| ISSN: | 1562-6016 |