Hard tube pulser for 150 MW klystron

The development of adequate modulators for high peak power klystrons is one of the focus points for linear collider R&D programs. For the DESY/THD Sband linear collider study 150MW RF pulse power at 50Hz repetition rate and 3mks pulse duration is required. Two different modulator schemes were in...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Вопросы атомной науки и техники
Datum:1999
Hauptverfasser: Bak, P.A., Goncharov, A.D., Kazarezov, I.V., Leonov, V.V., Skarbo, B.A., Cherniakin, A.D., Bieler, M.
Format: Artikel
Sprache:English
Veröffentlicht: Національний науковий центр «Харківський фізико-технічний інститут» НАН України 1999
Online Zugang:https://nasplib.isofts.kiev.ua/handle/123456789/81526
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:Hard tube pulser for 150 MW klystron / P.A. Bak, A.D. Goncharov, I.V. Kazarezov, V.V. Leonov, B.A. Skarbo, A.D. Cherniakin, M. Bieler // Вопросы атомной науки и техники. — 1999. — № 4. — С. 42-44. — Бібліогр.: 5 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine
Beschreibung
Zusammenfassung:The development of adequate modulators for high peak power klystrons is one of the focus points for linear collider R&D programs. For the DESY/THD Sband linear collider study 150MW RF pulse power at 50Hz repetition rate and 3mks pulse duration is required. Two different modulator schemes were investigated. One is the conventional line type pulser, using a pulse forming network and a step up transformer, the other one is a Hard Tube Pulser, using a DC power source at the full klystron voltage and a switch tube. The main advantages of a Hard Tube Pulser are short rise and fall times of the HV pulse, resulting in high efficiency and simpler design.
ISSN:1562-6016