Injector of the linac LU-20
The investigation have shown that the HV diode guns in combination with the forming system (collimator, deflector, buncher) are the most suitable for the use in injector accelerating structures with a high-power beam. The injector has been assembled with the linac and has been tested. In 1999 th...
Збережено в:
| Опубліковано в: : | Вопросы атомной науки и техники |
|---|---|
| Дата: | 1999 |
| Автори: | , , , , , , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
1999
|
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/81539 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Injector of the linac LU-20 / V.I. Beloglazov, L.S. Dovbush, L.K. Myakushko, M.V. Otlev, L.V. Reprintsev, V.P. Romasko, Yu.D. Tur, V.A. Vishnyakov, V.V. Zakutin // Вопросы атомной науки и техники. — 1999. — № 4. — С. 105-106. — Бібліогр.: 2 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The investigation have shown that the HV diode
guns in combination with the forming system
(collimator, deflector, buncher) are the most suitable for
the use in injector accelerating structures with a high-power beam. The injector has been assembled with the
linac and has been tested. In 1999 the injector had 1400
hours of operating time without accidents. The main
parameters of the gun were 110 keV and 1.1 A.
|
|---|---|
| ISSN: | 1562-6016 |