Particle transport simulations based on selfconsistency of pressure profiles in tokamaks

Simulation of particle and heat transport was performed with the ASTRA code. The equations for the electron
 temperature and density, ion temperature and current diffusion were solved. For the heat transport we used the
 canonical profiles model. Three T-10 pulses with toroidal mag...

Повний опис

Збережено в:
Бібліографічні деталі
Опубліковано в: :Вопросы атомной науки и техники
Дата:2006
Автори: Danilov, A.V., Dnestrovskij, Yu. N., Andreev, V.F., Cherkasov, S.V., Dnestrovskij, A.Yu., Lysenko, S.E., Vershkov, V.A.
Формат: Стаття
Мова:Англійська
Опубліковано: Національний науковий центр «Харківський фізико-технічний інститут» НАН України 2006
Теми:
Онлайн доступ:https://nasplib.isofts.kiev.ua/handle/123456789/81776
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Цитувати:Particle transport simulations based on selfconsistency of pressure profiles in tokamaks / A.V. Danilov, Yu. N. Dnestrovskij,
 V.F. Andreev, S.V. Cherkasov, A.Yu. Dnestrovskij, S.E. Lysenko, V.A. Vershkov // Вопросы атомной науки и техники. — 2006. — № 6. — С. 44-46. — Бібліогр.: 3 назв. — англ.

Репозитарії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
Опис
Резюме:Simulation of particle and heat transport was performed with the ASTRA code. The equations for the electron
 temperature and density, ion temperature and current diffusion were solved. For the heat transport we used the
 canonical profiles model. Three T-10 pulses with toroidal magnetic field 2.5 T, plasma current 250…255 kA, initial
 average density 1.3, 2.4 and 3.2×10¹⁹ m⁻³ respectively, on-axis 900 kW ECRH and D₂ puffing were considered. The
 model proved to describe rather fast penetration of the density disturbance from the edge to the core during 15…20 ms
 after gas puffing. The simulation of the density profiles agrees with experiment in Ohmic and ECRH phases, and during
 the gas puffing, describing the particle pump-out after ECRH switch-on. The neutral influx at the plasma edge increases
 after ECRH switch-on in agreement with Da measurements. Both the effective diffusion coefficient and pinch velocity
 decrease slightly when the plasma density is increased. A set of two Ohmic and three NBI MAST pulses were
 considered for comparison.
ISSN:1562-6016