Modern methods of Ta₂O₅ coatings deposition for biomedical applications
The study of e-beam evaporated Ta₂O₅ film structure and properties effect on cell/material response was performed. The surface properties and structure of e-beam evaporated Ta₂O₅ films were investigated by means of XPS and XRD methods. The cytotoxicity and cytocompatibility were estimated by in...
Saved in:
| Published in: | Вопросы атомной науки и техники |
|---|---|
| Date: | 2009 |
| Main Authors: | Donkov, N., Zykova, A., Safonov, V., Mateev, E. |
| Format: | Article |
| Language: | English |
| Published: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2009
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/88644 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Modern methods of Ta2O5 coatings deposition for biomedical applications / N. Donkov, A. Zykova, V. Safonov, E. Mateev // Вопросы атомной науки и техники. — 2009. — № 1. — С. 153-155. — Бібліогр.: 8 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Tantalum pentoxide ceramic coatings deposition on Ti4AI6V substrates for biomedical applications
by: Donkov, N., et al.
Published: (2011)
by: Donkov, N., et al.
Published: (2011)
Effect of substrate bias voltage parameters on surface properties of ta-C coatings
by: Safonov, V., et al.
Published: (2017)
by: Safonov, V., et al.
Published: (2017)
Plasma assisted deposition of TaB₂ coatings by magnetron sputtering system
by: Yakovin, S., et al.
Published: (2017)
by: Yakovin, S., et al.
Published: (2017)
The influence of deposition technological process parameters on surface properties of multilayer coatings
by: Zykova, A., et al.
Published: (2009)
by: Zykova, A., et al.
Published: (2009)
In vitro biocompatibility of amorphous carbon based coatings by varying of surface chemistry and nitrogen concentrations
by: Luk’yanchenko, V., et al.
Published: (2015)
by: Luk’yanchenko, V., et al.
Published: (2015)
The corrosion properties of multilayer coatings deposited on stainless steel and Ti4Al6V substrates
by: Zykova, A., et al.
Published: (2009)
by: Zykova, A., et al.
Published: (2009)
Mechanical and tribological characteristics of zirconium based ceramic coatings for micro-bearing application
by: Warcholinski, B., et al.
Published: (2014)
by: Warcholinski, B., et al.
Published: (2014)
Increasing of mass transfer efficiency at magnetron deposition of metal coating
by: Chunadra, A.G., et al.
Published: (2015)
by: Chunadra, A.G., et al.
Published: (2015)
Properties of DLC coatings deposited by DC and DC with superimposed pulsed vacuum arc
by: Zavaleyev, V., et al.
Published: (2014)
by: Zavaleyev, V., et al.
Published: (2014)
Features of coatings deposition in combined stationary-pulsed operation mode of the magnetron sputtering system
by: Chunadra, А.G., et al.
Published: (2017)
by: Chunadra, А.G., et al.
Published: (2017)
The effect of unintentional oxygen incorporation into Cr-CrN-DLC coatings deposited by MePIIID method using filtered cathodic vacuum arc carbon and metal plasma
by: Walkowicz, J., et al.
Published: (2010)
by: Walkowicz, J., et al.
Published: (2010)
Structure of Fe-Cu coatings prepared by the magnetron sputtering method
by: Nowakowska-Langier, K., et al.
Published: (2010)
by: Nowakowska-Langier, K., et al.
Published: (2010)
Intrinsic stresses in multi-component nitride coatings produced by plasma immersion ion implantation
by: Kalinichenko, A.I., et al.
Published: (2017)
by: Kalinichenko, A.I., et al.
Published: (2017)
Simulation of nanoparticle deposition from plasmas on solid surface
by: Bondar, M.A., et al.
Published: (2018)
by: Bondar, M.A., et al.
Published: (2018)
Study of degradation mechanism of metal-cutting tools and their hardening by ZrN PVD coatings
by: Skoblo, T.S., et al.
Published: (2018)
by: Skoblo, T.S., et al.
Published: (2018)
Investigation of antimicrobial activity and morphological properties of metal coated textile surfaces
by: Necdet Aslan, et al.
Published: (2014)
by: Necdet Aslan, et al.
Published: (2014)
Investigation on surface, electrical and optical properties of ITO-Ag-ITO coated glass
by: Aslan, Aslan, et al.
Published: (2015)
by: Aslan, Aslan, et al.
Published: (2015)
Double magnetron cluster set-up for synthesis of micro and nano structure coatings
by: Yakovin, S., et al.
Published: (2015)
by: Yakovin, S., et al.
Published: (2015)
TiOx thin films AP DBD deposition on polyamide rope
by: Klenko, Y., et al.
Published: (2010)
by: Klenko, Y., et al.
Published: (2010)
Erosion of vacuum-arc TiN coatings in plasma of stationary magnetron-type discharges
by: Glazunov, G.P., et al.
Published: (2011)
by: Glazunov, G.P., et al.
Published: (2011)
Formation of forest of single-walled carbon nanotubes in plasma-enhanced chemical vapor deposition
by: Burmaka, G.P., et al.
Published: (2012)
by: Burmaka, G.P., et al.
Published: (2012)
Synthesis of TiO₂ different phase by DC magnetron sputtering
by: Dobrovolskiy, A., et al.
Published: (2014)
by: Dobrovolskiy, A., et al.
Published: (2014)
Development and application of metal contacts on polycrystalline diamond films using combination of HF and arc plasma sources
by: Muratov, R.M., et al.
Published: (2014)
by: Muratov, R.M., et al.
Published: (2014)
Formation of MoO₃ crystals in electric arc plasma source
by: Lebid, A.V., et al.
Published: (2014)
by: Lebid, A.V., et al.
Published: (2014)
The magnetoplasma separation method of spent nuclear fuel
by: Yuferov, V.B., et al.
Published: (2017)
by: Yuferov, V.B., et al.
Published: (2017)
Investigation on the possibility of determining plasma parameters by the method of low-frequency diagnostics
by: Kovtun, Yu.V., et al.
Published: (2014)
by: Kovtun, Yu.V., et al.
Published: (2014)
Influence of negative ions on atomic oxygen production in a hollow cathode discharge in O₂/Ar mixture
by: Lavrukevich, Yu., et al.
Published: (2017)
by: Lavrukevich, Yu., et al.
Published: (2017)
Optimization of the plasma electrostatic filter using Taguchi method
by: Zavaleyev, V., et al.
Published: (2011)
by: Zavaleyev, V., et al.
Published: (2011)
Obtaining silicon carbide via chemical vapor, plasma-chemical and sublimation methods
by: Zhuravlov, А.Yu., et al.
Published: (2017)
by: Zhuravlov, А.Yu., et al.
Published: (2017)
Obstructed DC glow discharge in low-pressure nitrogen
by: Lisovskiy, V., et al.
Published: (2010)
by: Lisovskiy, V., et al.
Published: (2010)
Decay of liquid metallic macroparticles in plasma-beam systems due to rayleigh instability
by: Bizyukov, A.A, et al.
Published: (2017)
by: Bizyukov, A.A, et al.
Published: (2017)
Simulation of the plasma jet with a dispersed phase in an axisymmetric chamber
by: Kravchenko, O.Yu., et al.
Published: (2012)
by: Kravchenko, O.Yu., et al.
Published: (2012)
Investigations on the parameters of multicomponent gas-metal plasma formed in the mixed molecular gases
by: Kovtun, Yu.V., et al.
Published: (2017)
by: Kovtun, Yu.V., et al.
Published: (2017)
Calculating reduced electric field in diffusion regime of DC discharge positive column
by: Lisovskiy, V.A., et al.
Published: (2015)
by: Lisovskiy, V.A., et al.
Published: (2015)
Effect of the parameters of a gas-discharge plasma on the equilibrium temperature and floating potential of macroparticle
by: Bizyukov, A.A., et al.
Published: (2012)
by: Bizyukov, A.A., et al.
Published: (2012)
The obtaining and properties investigation of plasma formation at pulse discharge in water aerosol
by: Iukhymenko, V.V., et al.
Published: (2013)
by: Iukhymenko, V.V., et al.
Published: (2013)
The research of double-pulse discharge in a plasma-liquid system with cylindrical geometry
by: Chernyak, V.Ya., et al.
Published: (2012)
by: Chernyak, V.Ya., et al.
Published: (2012)
Particle charging in beam-plasma systems
by: Bizyukov, А.А., et al.
Published: (2013)
by: Bizyukov, А.А., et al.
Published: (2013)
Continuous process of carbon nanoparticles generation by the plasma-liquid system "tornado" type
by: Veremii, Iu.P., et al.
Published: (2014)
by: Veremii, Iu.P., et al.
Published: (2014)
Charging of macroparticles in a high-voltage vacuum arc sheath
by: Bizyukov, A.A., et al.
Published: (2015)
by: Bizyukov, A.A., et al.
Published: (2015)
Similar Items
-
Tantalum pentoxide ceramic coatings deposition on Ti4AI6V substrates for biomedical applications
by: Donkov, N., et al.
Published: (2011) -
Effect of substrate bias voltage parameters on surface properties of ta-C coatings
by: Safonov, V., et al.
Published: (2017) -
Plasma assisted deposition of TaB₂ coatings by magnetron sputtering system
by: Yakovin, S., et al.
Published: (2017) -
The influence of deposition technological process parameters on surface properties of multilayer coatings
by: Zykova, A., et al.
Published: (2009) -
In vitro biocompatibility of amorphous carbon based coatings by varying of surface chemistry and nitrogen concentrations
by: Luk’yanchenko, V., et al.
Published: (2015)