Tantalum pentoxide ceramic coatings deposition on Ti4AI6V substrates for biomedical applications
Tantalum pentoxide ceramic coatings are presented as perspective biomaterials for various biomedical applications. The surface properties and structure of as-deposited, annealed at 450°C and 700°C e-beam evaporated Ta2O5 films on Ti alloy substrates (Ti4Al6V) were investigated. The results demonst...
Gespeichert in:
| Veröffentlicht in: | Вопросы атомной науки и техники |
|---|---|
| Datum: | 2011 |
| Hauptverfasser: | Donkov, N., Zykova, A., Safonov, V., Rogowska, R., Smolik, J., Luk’yanchenko, V. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2011
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/90948 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Tantalum pentoxide ceramic coatings deposition on Ti4AI6V substrates for biomedical applications / N. Donkov, A. Zykova, V. Safonov, R. Rogowska, J. Smolik, V. Luk’yanchenko // Вопросы атомной науки и техники. — 2011. — № 1. — С. 131-133. — Бібліогр.: 15 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Modern methods of Ta₂O₅ coatings deposition for biomedical applications
von: Donkov, N., et al.
Veröffentlicht: (2009)
von: Donkov, N., et al.
Veröffentlicht: (2009)
In vitro biocompatibility of amorphous carbon based coatings by varying of surface chemistry and nitrogen concentrations
von: Luk’yanchenko, V., et al.
Veröffentlicht: (2015)
von: Luk’yanchenko, V., et al.
Veröffentlicht: (2015)
The corrosion properties of multilayer coatings deposited on stainless steel and Ti4Al6V substrates
von: Zykova, A., et al.
Veröffentlicht: (2009)
von: Zykova, A., et al.
Veröffentlicht: (2009)
Effect of substrate bias voltage parameters on surface properties of ta-C coatings
von: Safonov, V., et al.
Veröffentlicht: (2017)
von: Safonov, V., et al.
Veröffentlicht: (2017)
The influence of deposition technological process parameters on surface properties of multilayer coatings
von: Zykova, A., et al.
Veröffentlicht: (2009)
von: Zykova, A., et al.
Veröffentlicht: (2009)
Mechanical and tribological characteristics of zirconium based ceramic coatings for micro-bearing application
von: Warcholinski, B., et al.
Veröffentlicht: (2014)
von: Warcholinski, B., et al.
Veröffentlicht: (2014)
The biomedical application and corrosion properties of implanted materials with protective coatings
von: Zykova, A.V., et al.
Veröffentlicht: (2005)
von: Zykova, A.V., et al.
Veröffentlicht: (2005)
Increasing of mass transfer efficiency at magnetron deposition of metal coating
von: Chunadra, A.G., et al.
Veröffentlicht: (2015)
von: Chunadra, A.G., et al.
Veröffentlicht: (2015)
Structure of Fe-Cu coatings prepared by the magnetron sputtering method
von: Nowakowska-Langier, K., et al.
Veröffentlicht: (2010)
von: Nowakowska-Langier, K., et al.
Veröffentlicht: (2010)
Investigation of antimicrobial activity and morphological properties of metal coated textile surfaces
von: Necdet Aslan, et al.
Veröffentlicht: (2014)
von: Necdet Aslan, et al.
Veröffentlicht: (2014)
Plasma assisted deposition of TaB₂ coatings by magnetron sputtering system
von: Yakovin, S., et al.
Veröffentlicht: (2017)
von: Yakovin, S., et al.
Veröffentlicht: (2017)
Properties of DLC coatings deposited by DC and DC with superimposed pulsed vacuum arc
von: Zavaleyev, V., et al.
Veröffentlicht: (2014)
von: Zavaleyev, V., et al.
Veröffentlicht: (2014)
Investigation on surface, electrical and optical properties of ITO-Ag-ITO coated glass
von: Aslan, Aslan, et al.
Veröffentlicht: (2015)
von: Aslan, Aslan, et al.
Veröffentlicht: (2015)
Double magnetron cluster set-up for synthesis of micro and nano structure coatings
von: Yakovin, S., et al.
Veröffentlicht: (2015)
von: Yakovin, S., et al.
Veröffentlicht: (2015)
Intrinsic stresses in multi-component nitride coatings produced by plasma immersion ion implantation
von: Kalinichenko, A.I., et al.
Veröffentlicht: (2017)
von: Kalinichenko, A.I., et al.
Veröffentlicht: (2017)
Features of coatings deposition in combined stationary-pulsed operation mode of the magnetron sputtering system
von: Chunadra, А.G., et al.
Veröffentlicht: (2017)
von: Chunadra, А.G., et al.
Veröffentlicht: (2017)
Erosion of vacuum-arc TiN coatings in plasma of stationary magnetron-type discharges
von: Glazunov, G.P., et al.
Veröffentlicht: (2011)
von: Glazunov, G.P., et al.
Veröffentlicht: (2011)
Study of degradation mechanism of metal-cutting tools and their hardening by ZrN PVD coatings
von: Skoblo, T.S., et al.
Veröffentlicht: (2018)
von: Skoblo, T.S., et al.
Veröffentlicht: (2018)
The effect of unintentional oxygen incorporation into Cr-CrN-DLC coatings deposited by MePIIID method using filtered cathodic vacuum arc carbon and metal plasma
von: Walkowicz, J., et al.
Veröffentlicht: (2010)
von: Walkowicz, J., et al.
Veröffentlicht: (2010)
About influence of energy of electrons and ions on speed of electron- and ion-stimulated plasmachemical etching of silicon
von: Fedorovich, O.A., et al.
Veröffentlicht: (2010)
von: Fedorovich, O.A., et al.
Veröffentlicht: (2010)
Particle charging in beam-plasma systems
von: Bizyukov, А.А., et al.
Veröffentlicht: (2013)
von: Bizyukov, А.А., et al.
Veröffentlicht: (2013)
Formation of forest of single-walled carbon nanotubes in plasma-enhanced chemical vapor deposition
von: Burmaka, G.P., et al.
Veröffentlicht: (2012)
von: Burmaka, G.P., et al.
Veröffentlicht: (2012)
Neon cryovacuum system for endurance tests of electrojet propulsion systems
von: Batracov, A.B., et al.
Veröffentlicht: (2015)
von: Batracov, A.B., et al.
Veröffentlicht: (2015)
Longitudinal extraction of H⁻ ions from Penning discharge with metal-hydride cathode
von: Sereda, I.N., et al.
Veröffentlicht: (2017)
von: Sereda, I.N., et al.
Veröffentlicht: (2017)
About unrealization of tungsten lines up to the ground state in the nonideal plasma of pulse discharges in water
von: Fedorovich, O.A.
Veröffentlicht: (2009)
von: Fedorovich, O.A.
Veröffentlicht: (2009)
Properties of microdischarge plasma in the vortex air flow
von: Chernyak, V.Y., et al.
Veröffentlicht: (2018)
von: Chernyak, V.Y., et al.
Veröffentlicht: (2018)
On the peculiarities of electrical conductivity in ARC plasma containing stainless steel and tungsten
von: Porytskyy, P.V.
Veröffentlicht: (2018)
von: Porytskyy, P.V.
Veröffentlicht: (2018)
Investigation of electric arc discharge plasma between one-component Cu and Ni and composite Ag-Ni electrodes
von: Veklich, A., et al.
Veröffentlicht: (2017)
von: Veklich, A., et al.
Veröffentlicht: (2017)
Dynamics of dust particles in a plasma jet
von: Kravchenko, O.Yu., et al.
Veröffentlicht: (2017)
von: Kravchenko, O.Yu., et al.
Veröffentlicht: (2017)
Рhysics and design of wide-aperture bipolar particle sources
von: Dudin, S.V.
Veröffentlicht: (2013)
von: Dudin, S.V.
Veröffentlicht: (2013)
TiOx thin films AP DBD deposition on polyamide rope
von: Klenko, Y., et al.
Veröffentlicht: (2010)
von: Klenko, Y., et al.
Veröffentlicht: (2010)
Dependence of RF breakdown curve on electrode geometry in CCP reactor
von: Dudin, S.V., et al.
Veröffentlicht: (2012)
von: Dudin, S.V., et al.
Veröffentlicht: (2012)
Influence of corona discharge on paraffin combustion
von: Nedybaliuk, O.A., et al.
Veröffentlicht: (2018)
von: Nedybaliuk, O.A., et al.
Veröffentlicht: (2018)
The influence of plasma treatment of different cathode materials on current-voltage characteristics of mirror discharge in air
von: Glazunov, G.P., et al.
Veröffentlicht: (2013)
von: Glazunov, G.P., et al.
Veröffentlicht: (2013)
Plasma catalysis of chemical reactions
von: Chernyak, V.Ya., et al.
Veröffentlicht: (2014)
von: Chernyak, V.Ya., et al.
Veröffentlicht: (2014)
The conceptual design of a demo-imitation separatorthe model of a plasma mass filter for irradiated oxide uranium fuel
von: Yuferov, V.B., et al.
Veröffentlicht: (2018)
von: Yuferov, V.B., et al.
Veröffentlicht: (2018)
The influence of irradiation by hydrogen plasma on the structure and phase compozition Ti-Zr-Ni alloys containing quasicrystalline phase
von: Bazdyreva, S.V., et al.
Veröffentlicht: (2012)
von: Bazdyreva, S.V., et al.
Veröffentlicht: (2012)
On the transport properties of a nonideal plasma of underwater discharges
von: Starchyk, P.D., et al.
Veröffentlicht: (2011)
von: Starchyk, P.D., et al.
Veröffentlicht: (2011)
Plasma chemistry for concept of sustainable development
von: Chernyak, V.Ya., et al.
Veröffentlicht: (2017)
von: Chernyak, V.Ya., et al.
Veröffentlicht: (2017)
Researching of acoustic waves in plasma-liquid system with pulsed discharge
von: Iukhymenko, V.V., et al.
Veröffentlicht: (2015)
von: Iukhymenko, V.V., et al.
Veröffentlicht: (2015)
Ähnliche Einträge
-
Modern methods of Ta₂O₅ coatings deposition for biomedical applications
von: Donkov, N., et al.
Veröffentlicht: (2009) -
In vitro biocompatibility of amorphous carbon based coatings by varying of surface chemistry and nitrogen concentrations
von: Luk’yanchenko, V., et al.
Veröffentlicht: (2015) -
The corrosion properties of multilayer coatings deposited on stainless steel and Ti4Al6V substrates
von: Zykova, A., et al.
Veröffentlicht: (2009) -
Effect of substrate bias voltage parameters on surface properties of ta-C coatings
von: Safonov, V., et al.
Veröffentlicht: (2017) -
The influence of deposition technological process parameters on surface properties of multilayer coatings
von: Zykova, A., et al.
Veröffentlicht: (2009)