Особенности смешанных типов переноса металла при сварке в защитных газах длинной дугой
Проанализирована взаимосвязь вероятности появления смешанных типов переноса металла с динамическими характеристиками источника питания. Наблюдения за характером формирования и перехода капель осуществлялись с помощью установки, состоящей из лазера и высокоскоростной цифровой видеокамеры, при синхрон...
Gespeichert in:
| Veröffentlicht in: | Автоматическая сварка |
|---|---|
| Datum: | 2005 |
| Hauptverfasser: | , |
| Format: | Artikel |
| Sprache: | Russisch |
| Veröffentlicht: |
Інститут електрозварювання ім. Є.О. Патона НАН України
2005
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/91781 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Особенности смешанных типов переноса металла при сварке в защитных газах длинной дугой / В. Пономарев, А. Скотти // Автоматическая сварка. — 2005. — № 3 (623). — С. 8-14. — Бібліогр.: 2 назв. — рос. |
Institution
Digital Library of Periodicals of National Academy of Sciences of Ukraine| _version_ | 1862536985960251392 |
|---|---|
| author | Пономарев, В. Скотти, А. |
| author_facet | Пономарев, В. Скотти, А. |
| citation_txt | Особенности смешанных типов переноса металла при сварке в защитных газах длинной дугой / В. Пономарев, А. Скотти // Автоматическая сварка. — 2005. — № 3 (623). — С. 8-14. — Бібліогр.: 2 назв. — рос. |
| collection | DSpace DC |
| container_title | Автоматическая сварка |
| description | Проанализирована взаимосвязь вероятности появления смешанных типов переноса металла с динамическими характеристиками источника питания. Наблюдения за характером формирования и перехода капель осуществлялись с помощью установки, состоящей из лазера и высокоскоростной цифровой видеокамеры, при синхронной регистрации кривых напряжения дуги и тока сварки. Показано, что и в условиях сварки без коротких замыканий регулировка скоростей нарастания и снижения тока может существенно влиять на характер формирования и переноса капель и вызывать появление смешанных типов переноса металла.
A mixed metal transfer mode in MIG/MAG welding, in which two or more transfer modes happen in a periodic sequence, is usually undesirable, because it may deteriorate the welding process stability. Thus, there is a strong appeal for investigating the causes of such a metal transfer mode in order to determine means of deal with this phenomenon. This work was aimed to make an experimental and descriptive analysis of the mechanisms that govern one of the free-flight metal transfer mixed mode in the MIG/MAG welding. For that, current rising and falling rates were systematically adjusted in an electronic power supply. The droplet formation and transfer were observed using an arc visualisation system based on a laser and a high-speed camera. The arc voltage and welding current signals were monitored, in synchronism with the droplet images (frames), using a computer-based measuring system. It was verified that one of the factors that provoke this mixed metal transfer mode is inadequate dynamic characteristics of the power source, namely, excessively fast current rising and falling rates that happen during welding circuit resistance changes caused by the metal droplet formation and detachment. The received results seem useful for electronic power source adjustments, as well as for designers of new welding power sources.
|
| first_indexed | 2025-11-24T11:42:43Z |
| format | Article |
| fulltext | |
| id | nasplib_isofts_kiev_ua-123456789-91781 |
| institution | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| issn | 0005-111X |
| language | Russian |
| last_indexed | 2025-11-24T11:42:43Z |
| publishDate | 2005 |
| publisher | Інститут електрозварювання ім. Є.О. Патона НАН України |
| record_format | dspace |
| spelling | Пономарев, В. Скотти, А. 2016-01-14T10:24:27Z 2016-01-14T10:24:27Z 2005 Особенности смешанных типов переноса металла при сварке в защитных газах длинной дугой / В. Пономарев, А. Скотти // Автоматическая сварка. — 2005. — № 3 (623). — С. 8-14. — Бібліогр.: 2 назв. — рос. 0005-111X https://nasplib.isofts.kiev.ua/handle/123456789/91781 Проанализирована взаимосвязь вероятности появления смешанных типов переноса металла с динамическими характеристиками источника питания. Наблюдения за характером формирования и перехода капель осуществлялись с помощью установки, состоящей из лазера и высокоскоростной цифровой видеокамеры, при синхронной регистрации кривых напряжения дуги и тока сварки. Показано, что и в условиях сварки без коротких замыканий регулировка скоростей нарастания и снижения тока может существенно влиять на характер формирования и переноса капель и вызывать появление смешанных типов переноса металла. A mixed metal transfer mode in MIG/MAG welding, in which two or more transfer modes happen in a periodic sequence, is usually undesirable, because it may deteriorate the welding process stability. Thus, there is a strong appeal for investigating the causes of such a metal transfer mode in order to determine means of deal with this phenomenon. This work was aimed to make an experimental and descriptive analysis of the mechanisms that govern one of the free-flight metal transfer mixed mode in the MIG/MAG welding. For that, current rising and falling rates were systematically adjusted in an electronic power supply. The droplet formation and transfer were observed using an arc visualisation system based on a laser and a high-speed camera. The arc voltage and welding current signals were monitored, in synchronism with the droplet images (frames), using a computer-based measuring system. It was verified that one of the factors that provoke this mixed metal transfer mode is inadequate dynamic characteristics of the power source, namely, excessively fast current rising and falling rates that happen during welding circuit resistance changes caused by the metal droplet formation and detachment. The received results seem useful for electronic power source adjustments, as well as for designers of new welding power sources. ru Інститут електрозварювання ім. Є.О. Патона НАН України Автоматическая сварка Научно-технический раздел Особенности смешанных типов переноса металла при сварке в защитных газах длинной дугой Mechanism of long arc MIG/MAG welding metal transfer mixed modes provoked by inadequate dynamic features of the power source Article published earlier |
| spellingShingle | Особенности смешанных типов переноса металла при сварке в защитных газах длинной дугой Пономарев, В. Скотти, А. Научно-технический раздел |
| title | Особенности смешанных типов переноса металла при сварке в защитных газах длинной дугой |
| title_alt | Mechanism of long arc MIG/MAG welding metal transfer mixed modes provoked by inadequate dynamic features of the power source |
| title_full | Особенности смешанных типов переноса металла при сварке в защитных газах длинной дугой |
| title_fullStr | Особенности смешанных типов переноса металла при сварке в защитных газах длинной дугой |
| title_full_unstemmed | Особенности смешанных типов переноса металла при сварке в защитных газах длинной дугой |
| title_short | Особенности смешанных типов переноса металла при сварке в защитных газах длинной дугой |
| title_sort | особенности смешанных типов переноса металла при сварке в защитных газах длинной дугой |
| topic | Научно-технический раздел |
| topic_facet | Научно-технический раздел |
| url | https://nasplib.isofts.kiev.ua/handle/123456789/91781 |
| work_keys_str_mv | AT ponomarevv osobennostismešannyhtipovperenosametallaprisvarkevzaŝitnyhgazahdlinnoidugoi AT skottia osobennostismešannyhtipovperenosametallaprisvarkevzaŝitnyhgazahdlinnoidugoi AT ponomarevv mechanismoflongarcmigmagweldingmetaltransfermixedmodesprovokedbyinadequatedynamicfeaturesofthepowersource AT skottia mechanismoflongarcmigmagweldingmetaltransfermixedmodesprovokedbyinadequatedynamicfeaturesofthepowersource |