Evaluation of the Test Temperature Effect on Failure Mechanisms and Notched Impact Strength Characteristics of Ultra-Hard Low Alloy Steels
На основании данных фрактографического анализа оценено изменение механизмов разрушения высокопрочных малолегированных сталей ARMOX 500T и ARMOX 600T в зависимости оттемпературы испытаний. В экспериментально исследованномтемпературном диапазоне
 -80...100°C была установлена высокая вероятност...
Saved in:
| Published in: | Проблемы прочности |
|---|---|
| Date: | 2011 |
| Main Authors: | Binar, T., Kadlec, J., Rejzek, M., Vlkovsky, M., Hruby, V. |
| Format: | Article |
| Language: | English |
| Published: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2011
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/95209 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Evaluation of the Test Temperature Effect on Failure Mechanisms and Notched Impact Strength Characteristics of Ultra-Hard Low Alloy Steels / T. Binar, J. Kadlec, M. Rejzek, M. Vlkovsky, V. Hruby // Проблемы прочности. — 2011. — № 5. — С. 74-81. — Бібліогр.: 8 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
On analysis of failure emanating from a notch
by: G. Pluvinage
Published: (2019)
by: G. Pluvinage
Published: (2019)
Large-Scale Yielding Failure Prediction of Notched Ductile Plates by Means of the Linear Elastic Notch Fracture Mechanics
by: Torabi, A.R., et al.
Published: (2017)
by: Torabi, A.R., et al.
Published: (2017)
The impact of earthquakes on the regime of ultra-low-frequency electromagnetic emissions
by: Dovbnya, B. V., et al.
Published: (2012)
by: Dovbnya, B. V., et al.
Published: (2012)
Methods for evaluation of strengthening of metal of welds of high-strength low-alloyed steels
by: V. A. Kostin, et al.
Published: (2011)
by: V. A. Kostin, et al.
Published: (2011)
The Effect of Notch Tip Position on the Charpy Impact Energy for Bainitic and Martensitic Functionally Graded Steel
by: Eskandari Jam, J., et al.
Published: (2014)
by: Eskandari Jam, J., et al.
Published: (2014)
Use of the finite elements method to calculate the strength of conical shells with notches
by: Kabanov, V.V., et al.
Published: (1985)
by: Kabanov, V.V., et al.
Published: (1985)
Texture studies of the deformed ultra-low carbon steel after hydrostatic pressure torsion
by: V. Z. Kutsova, et al.
Published: (2017)
by: V. Z. Kutsova, et al.
Published: (2017)
Dependence of the Critical Temperature Magnitude at Impact Toughness Tests on the Parameters of the Microstructure of Martensitic Low-Carbon Steels
by: S. O. Kotrechko, et al.
Published: (2014)
by: S. O. Kotrechko, et al.
Published: (2014)
Microstructural features of failure surfaces and low-temperature mechanical properties of Ti-6Al-4V ELI ultra-fine grained alloy
by: Tabachnikova, E.D., et al.
Published: (2008)
by: Tabachnikova, E.D., et al.
Published: (2008)
Wet underwater welding of low-alloy steels of increased strength
by: Ju. Maksimov, et al.
Published: (2013)
by: Ju. Maksimov, et al.
Published: (2013)
Brittle Failure of Graphite Weakened by V-Notches: A Review of Some Recent Results under Different Loading Modes
by: Berto, F., et al.
Published: (2015)
by: Berto, F., et al.
Published: (2015)
Fatigue properties of notched specimens made of FeP04 steel
by: D. Rozumek, et al.
Published: (2011)
by: D. Rozumek, et al.
Published: (2011)
Fatigue properties of notched specimens made of FeP04 steel
by: Rozumek, D., et al.
Published: (2011)
by: Rozumek, D., et al.
Published: (2011)
Ultra-Low-Noise Cryogenic PHEMT Amplifiers
by: Korolev, O. M., et al.
Published: (2013)
by: Korolev, O. M., et al.
Published: (2013)
Investigation of contact fatigue strength and mechanical properties of the microalloyed with vanadium bandage steel with different levels of hardness
by: I. G. Uzlov, et al.
Published: (2013)
by: I. G. Uzlov, et al.
Published: (2013)
Making of sheet products with high-strength low-alloy vanadium steel
by: B. P. Krikunov, et al.
Published: (2011)
by: B. P. Krikunov, et al.
Published: (2011)
Prediction of temperatures of phase transformations in high-strength low-alloy steels
by: G. M. Grigorenko, et al.
Published: (2013)
by: G. M. Grigorenko, et al.
Published: (2013)
Notch Effect on the Fatigue Behavior of a Hot Dip Galvanized Structural Steel
by: Berto, F., et al.
Published: (2015)
by: Berto, F., et al.
Published: (2015)
Evaluation of Metal-Active Gas Double-Sided Double-Power Arc Welded Joints of High-Strength Low-Alloy Steel
by: Chen, Y.X., et al.
Published: (2015)
by: Chen, Y.X., et al.
Published: (2015)
Mechanical Behavior and Failure of Riveting Joints in Tensile and Shear Tests
by: Mucha, J., et al.
Published: (2015)
by: Mucha, J., et al.
Published: (2015)
Radiation-hard plastic scintillator with increased mechanical strength
by: Zhmurin, P.N., et al.
Published: (2015)
by: Zhmurin, P.N., et al.
Published: (2015)
Hot-cracking of high-alloyed steels evaluated by wedge rolling test
by: Schindler, I., et al.
Published: (2008)
by: Schindler, I., et al.
Published: (2008)
Microstructure and Microhardness of Fiber Laser Welded Dual-Phase Steels with High-Strength Low-Alloy Steels
by: Švec, P., et al.
Published: (2017)
by: Švec, P., et al.
Published: (2017)
On the mechanism of influence of the grain size of ferrite on the fatigue strength low carbon steel
by: O. N. Perkov, et al.
Published: (2014)
by: O. N. Perkov, et al.
Published: (2014)
Stresses in anisotropic halfplane with notches
by: O. V. Maksymovych, et al.
Published: (2015)
by: O. V. Maksymovych, et al.
Published: (2015)
Creep-Fatigue Behavior Evaluation by Reversible Permeability of CrMo Ferritic Steel for Ultra-Supercritical Steem Power Plants
by: Kim, C.S.
Published: (2016)
by: Kim, C.S.
Published: (2016)
Thin film superconducting quantum interferometer with ultra-low inductance
by: S. I. Bondarenko, et al.
Published: (2018)
by: S. I. Bondarenko, et al.
Published: (2018)
Ultra-high vacuum investigations of atomic layers at low temperatures
by: Grazhulis, V.A.
Published: (1998)
by: Grazhulis, V.A.
Published: (1998)
Feasibility of application of high-strength low-alloy steels for manufacture of high-pressure vessels
by: V. M. Kulik, et al.
Published: (2011)
by: V. M. Kulik, et al.
Published: (2011)
Comparison of methods for evaluating the effect of welding thermal cycle on impact toughness of HAZ metal of low-alloy steel welded joints
by: V. D. Poznjakov, et al.
Published: (2016)
by: V. D. Poznjakov, et al.
Published: (2016)
Notch122, мутация локуса Notch типа Abruptex у Drosophila virilis: особенности генетических взаимодействий
by: Губенко, И.С., et al.
Published: (2010)
by: Губенко, И.С., et al.
Published: (2010)
Optimum Failure-Censored Step-Stress Life Test Plans for the Lomax Distribution
by: Ismail, Ali A.
Published: (2016)
by: Ismail, Ali A.
Published: (2016)
Method of reference signals creating in non-destructive testing based on low-speed impact
by: V. S. Eremenko, et al.
Published: (2021)
by: V. S. Eremenko, et al.
Published: (2021)
Stress relaxation in ultra-fine-grained copper at low homologous temperatures
by: N. V. Isaev, et al.
Published: (2018)
by: N. V. Isaev, et al.
Published: (2018)
SiGe HBT low noise amplifiers for ultra-wideband systems
by: V. P. Popov, et al.
Published: (2013)
by: V. P. Popov, et al.
Published: (2013)
Duplex surface treatment of stainless steel X12CrNi 18 8
by: Kadlec, J., et al.
Published: (2008)
by: Kadlec, J., et al.
Published: (2008)
Progressive Failure Analysis of Glass/Epoxy Composites at Low Temperatures
by: Shokrieh, M.M., et al.
Published: (2012)
by: Shokrieh, M.M., et al.
Published: (2012)
Hydrogen effect on local fracture emanating from notches in pipeline from steel API X52
by: Capelle, J., et al.
Published: (2009)
by: Capelle, J., et al.
Published: (2009)
Non-destructive testing and evaluation of technical state of steel technological pipelines of coal enterprises
by: E. S. Krylov, et al.
Published: (2017)
by: E. S. Krylov, et al.
Published: (2017)
Evaluation of heat-resistant steels tendency to tempering brittleness by using high-temperature tests
by: Ju. Skulskij, et al.
Published: (2016)
by: Ju. Skulskij, et al.
Published: (2016)
Similar Items
-
On analysis of failure emanating from a notch
by: G. Pluvinage
Published: (2019) -
Large-Scale Yielding Failure Prediction of Notched Ductile Plates by Means of the Linear Elastic Notch Fracture Mechanics
by: Torabi, A.R., et al.
Published: (2017) -
The impact of earthquakes on the regime of ultra-low-frequency electromagnetic emissions
by: Dovbnya, B. V., et al.
Published: (2012) -
Methods for evaluation of strengthening of metal of welds of high-strength low-alloyed steels
by: V. A. Kostin, et al.
Published: (2011) -
The Effect of Notch Tip Position on the Charpy Impact Energy for Bainitic and Martensitic Functionally Graded Steel
by: Eskandari Jam, J., et al.
Published: (2014)