A Computational Strategy for the Localization and Fracture of Laminated Composites. Part 2. Life Prediction by Mesoscale Modeling for Composite Structures
Описанный в сообщении 1 одномерный подход развит на случай двухмерного ламинатного композита Т300/914, подвергнутого статическому двухосному растяжению и сдвигу. Решение данной задачи осуществляется с помощью эволюционных моделей с эффектом задержки
 повреждений при ограниченной скорости их...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2011 |
| Hauptverfasser: | Boutaous, A., Elchikh, M., Abdelouahab, M., Belaidi, A. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2011
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/95272 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | A Computational Strategy for the Localization and Fracture of Laminated Composites. Part 2. Life Prediction by Mesoscale Modeling for Composite Structures / A. Boutaous, M. Elchikh, M. Abdelouahab, A. Belaidi // Проблемы прочности. — 2011. — № 6. — С. 83-93. — Бібліогр.: 9 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
An efficient computational method for mesoscale weather forecasting
von: V. A. Prusov, et al.
Veröffentlicht: (2020)
von: V. A. Prusov, et al.
Veröffentlicht: (2020)
Fabrication of laminated metal-intermetallic reinforced composite material
von: I. M. Huriia, et al.
Veröffentlicht: (2019)
von: I. M. Huriia, et al.
Veröffentlicht: (2019)
Nearsurface buckling in laminate composite material with imperfect interlayer contact
von: V. M. Bystrov, et al.
Veröffentlicht: (2022)
von: V. M. Bystrov, et al.
Veröffentlicht: (2022)
Fracture Resistance of Residually-Stressed Ceramic Laminated Structures
von: Gogotsi, G.A., et al.
Veröffentlicht: (2004)
von: Gogotsi, G.A., et al.
Veröffentlicht: (2004)
Prediction by a Genetic Algorithm of the Fiber-Matrix Interface Damage for Composite Material. Part 2. Study of Shear Damage in Graphite/Epoxv Nanocomposites
von: A. Mokaddem, et al.
Veröffentlicht: (2014)
von: A. Mokaddem, et al.
Veröffentlicht: (2014)
Prediction by a Genetic Algorithm of the Fiber-Matrix Interface Damage for Composite Material. Part 2. Study of Shear Damage in Graphite/Epoxv Nanocomposites
von: Mokaddem, A., et al.
Veröffentlicht: (2014)
von: Mokaddem, A., et al.
Veröffentlicht: (2014)
Features of dental polymer composites fracture under the action of local loading
von: V. R. Skalskyi, et al.
Veröffentlicht: (2021)
von: V. R. Skalskyi, et al.
Veröffentlicht: (2021)
Fracture Process in ± θ Laminates Subjected to Mode II Loading
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2002)
von: Ahmed Benyahia, A., et al.
Veröffentlicht: (2002)
Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells
von: Han, Z.Y., et al.
Veröffentlicht: (2014)
von: Han, Z.Y., et al.
Veröffentlicht: (2014)
Mechanical Properties of Thermoplastic Variable-Angle Composite Laminations for Conical Shells
von: Z. Y. Han, et al.
Veröffentlicht: (2014)
von: Z. Y. Han, et al.
Veröffentlicht: (2014)
On the Shear-Deformation Theories for the Analysis of Concrete Shells Reinforced with External Composite Laminates
von: Ferreira, A. J. M.
Veröffentlicht: (2003)
von: Ferreira, A. J. M.
Veröffentlicht: (2003)
Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
von: Fan, X.L., et al.
Veröffentlicht: (2014)
von: Fan, X.L., et al.
Veröffentlicht: (2014)
Determination of critical parameters in the problem of stability of elements of constructions from composite laminate
von: V. S. Zelenskij, et al.
Veröffentlicht: (2018)
von: V. S. Zelenskij, et al.
Veröffentlicht: (2018)
Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
von: X. L. Fan, et al.
Veröffentlicht: (2014)
von: X. L. Fan, et al.
Veröffentlicht: (2014)
Stress and Delamination Analysis on Overlapped-Grouped and Overlapped-Dispersed Tapered Composite Laminate
von: G. Chaudhary, et al.
Veröffentlicht: (2022)
von: G. Chaudhary, et al.
Veröffentlicht: (2022)
Analysis of Fatigue and Crack Growth in Carbon-Fiber Epoxy Matrix Composite Laminates
von: Putic, S., et al.
Veröffentlicht: (2003)
von: Putic, S., et al.
Veröffentlicht: (2003)
Local approach to fracture based prediction of reactor pressure vessel lifetime
von: Kotrechko, S.A., et al.
Veröffentlicht: (2009)
von: Kotrechko, S.A., et al.
Veröffentlicht: (2009)
On the propagation of axisymmetric waves in laminated composite compressible materials with initial stresses at the slipping of layers
von: Yu. Hlukhov
Veröffentlicht: (2016)
von: Yu. Hlukhov
Veröffentlicht: (2016)
Axisymmetric waves in laminated composite incompressible materials with initial stresses under the slipping of layers
von: Yu. Hlukhov
Veröffentlicht: (2016)
von: Yu. Hlukhov
Veröffentlicht: (2016)
Interfacial Fracture Toughness of Multilayer Composite Structures
von: Her, S.-C., et al.
Veröffentlicht: (2015)
von: Her, S.-C., et al.
Veröffentlicht: (2015)
End effect and near-surface buckling in a laminate composite material compres sed by a surface load
von: V. M. Bystrov
Veröffentlicht: (2019)
von: V. M. Bystrov
Veröffentlicht: (2019)
Buckling Analysis of Anti-Symmetric Cross-Ply Laminated Composite Plates under Different Boundary Conditions
von: B. Adim, et al.
Veröffentlicht: (2016)
von: B. Adim, et al.
Veröffentlicht: (2016)
Buckling Analysis of Anti-Symmetric Cross-Ply Laminated Composite Plates under Different Boundary Conditions
von: Adim, B., et al.
Veröffentlicht: (2016)
von: Adim, B., et al.
Veröffentlicht: (2016)
Fatigue Fracture Analysis of Composite Plates with an Elliptical Hole
von: Kielbasa, B., et al.
Veröffentlicht: (2017)
von: Kielbasa, B., et al.
Veröffentlicht: (2017)
Physical simulation of vibration disturbing forces of laminated core at the local pressing out
von: A. M. Melnyk
Veröffentlicht: (2016)
von: A. M. Melnyk
Veröffentlicht: (2016)
Construction of a model of deformation and short-time damageability for a laminate composite on the basis of the deformation criterion of microstrength
von: L. P. Khoroshun
Veröffentlicht: (2014)
von: L. P. Khoroshun
Veröffentlicht: (2014)
The Technology of Production of Composite Laminates with Functional Tribotechnical Layer Strengthened by Nanoscale Carbides and Oxides by Furnace-Based Welding
von: A. S. Zatulovskij, et al.
Veröffentlicht: (2019)
von: A. S. Zatulovskij, et al.
Veröffentlicht: (2019)
Evaluation of fracture energy of a composite by the method of digital speckl-correlation
von: Ya. L. Ivanytskyi, et al.
Veröffentlicht: (2010)
von: Ya. L. Ivanytskyi, et al.
Veröffentlicht: (2010)
Prediction of Stable Composition for High-Entropy Refractory Alloys
von: Melnick, A.B., et al.
Veröffentlicht: (2016)
von: Melnick, A.B., et al.
Veröffentlicht: (2016)
Study of Non-Classical Problems of Mechanics of Fracture of Composites with Interacting Cracks
von: V. L. Bogdanov, et al.
Veröffentlicht: (2015)
von: V. L. Bogdanov, et al.
Veröffentlicht: (2015)
Anderson localization in metamaterials with compositional disorder
von: Torres-Herrera, E.J., et al.
Veröffentlicht: (2011)
von: Torres-Herrera, E.J., et al.
Veröffentlicht: (2011)
Prediction by a Genetic Algorithm of the Fiber-Matrix Interface Damage for Composite Material. Part 1. Study of Shear Damage in Two Composites T300/914 and PEEK/APC2
von: Mokaddem, A., et al.
Veröffentlicht: (2014)
von: Mokaddem, A., et al.
Veröffentlicht: (2014)
Prediction by a Genetic Algorithm of the Fiber-Matrix Interface Damage for Composite Material. Part 1. Study of Shear Damage in Two Composites T300/914 and PEEK/APC2
von: A. Mokaddem, et al.
Veröffentlicht: (2014)
von: A. Mokaddem, et al.
Veröffentlicht: (2014)
Computer technology for dictionaries composition: publishing aspect
von: I. Kulchytskyi
Veröffentlicht: (2002)
von: I. Kulchytskyi
Veröffentlicht: (2002)
Computer modelling of conductivity of composites with chaotic structure
von: V. V. Novikov, et al.
Veröffentlicht: (2006)
von: V. V. Novikov, et al.
Veröffentlicht: (2006)
Computer calculation of the mineralogical composition of raw materials
von: L. P. Cherniak, et al.
Veröffentlicht: (2020)
von: L. P. Cherniak, et al.
Veröffentlicht: (2020)
Computer Analysis of Slow and Fast Waves in Composite Material
von: Ya. Ya. Rushchytskyi, et al.
Veröffentlicht: (2022)
von: Ya. Ya. Rushchytskyi, et al.
Veröffentlicht: (2022)
Structure features and fracture mechanisms of hexagonal boron nitride based composite materials
von: Vishnyakov, L.R., et al.
Veröffentlicht: (2007)
von: Vishnyakov, L.R., et al.
Veröffentlicht: (2007)
Interlaminar Fracture Toughness Estimation of Aerospace Composites by Weighted Residual Approach
von: Alfred Franklin, V., et al.
Veröffentlicht: (2015)
von: Alfred Franklin, V., et al.
Veröffentlicht: (2015)
The role of stress–strain state of gas turbine engine metal parts in predicting their safe life
von: Z. A. Duriagina, et al.
Veröffentlicht: (2021)
von: Z. A. Duriagina, et al.
Veröffentlicht: (2021)
Ähnliche Einträge
-
An efficient computational method for mesoscale weather forecasting
von: V. A. Prusov, et al.
Veröffentlicht: (2020) -
Fabrication of laminated metal-intermetallic reinforced composite material
von: I. M. Huriia, et al.
Veröffentlicht: (2019) -
Nearsurface buckling in laminate composite material with imperfect interlayer contact
von: V. M. Bystrov, et al.
Veröffentlicht: (2022) -
Fracture Resistance of Residually-Stressed Ceramic Laminated Structures
von: Gogotsi, G.A., et al.
Veröffentlicht: (2004) -
Prediction by a Genetic Algorithm of the Fiber-Matrix Interface Damage for Composite Material. Part 2. Study of Shear Damage in Graphite/Epoxv Nanocomposites
von: A. Mokaddem, et al.
Veröffentlicht: (2014)