Finite Element Method for Evaluating Rising and Slip of Column–Base Plate for Usual Connections
Предложена конечноэлементная методика расчета деформирования и относительного проскальзывания креплений стальной колонны кжелезобетонному основанию. Рассмотрены два случая крепления: пластина приваривается к торцу колонны и крепится двумя или четырьмя анкерными болтами к железобетонному основанию....
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2011 |
| Hauptverfasser: | Hamizi, M., Ait-Aider, H., Alliche, A. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2011
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/95274 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Finite Element Method for Evaluating Rising and Slip of Column–Base Plate for Usual Connections / M. Hamizi, H. Ait-Aider, A. Alliche // Проблемы прочности. — 2011. — № 6. — С. 104-116. — Бібліогр.: 27 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
C2 Property of Column Finite Matrix Rings
von: Liang Shen, et al.
Veröffentlicht: (2014)
von: Liang Shen, et al.
Veröffentlicht: (2014)
$C2$ Property of Column Finite Matrix Rings
von: Chen, Jianlong, et al.
Veröffentlicht: (2014)
von: Chen, Jianlong, et al.
Veröffentlicht: (2014)
Application of polymer-composite materials for elements of burille column
von: Ye. Chernova
Veröffentlicht: (2018)
von: Ye. Chernova
Veröffentlicht: (2018)
Reproduction of Belarusian proper names in Ukrainian language: codification and usual aspects
von: O. Skopnenko
Veröffentlicht: (2018)
von: O. Skopnenko
Veröffentlicht: (2018)
Allowing for residual stresses in the cross-sections of compressed l-shaped columns during their design
von: Golodnov, A.I.
Veröffentlicht: (2001)
von: Golodnov, A.I.
Veröffentlicht: (2001)
Study on Behavior of RPC Filled Steel Tubular Stub Columns under Axial Compression
von: Liu, S.H., et al.
Veröffentlicht: (2017)
von: Liu, S.H., et al.
Veröffentlicht: (2017)
Shallow coseismic slip deficit due to large (M7) strike-slip earthquakes
von: Y. Fialko
Veröffentlicht: (2010)
von: Y. Fialko
Veröffentlicht: (2010)
Shallow coseismic slip deficit due to large (M7) strike-slip earthquakes
von: Fialko, Y.
Veröffentlicht: (2010)
von: Fialko, Y.
Veröffentlicht: (2010)
Three-dimensional Analysis of Free Vibrations of Layered Composite Plates on the Base of Semi-analytical of Finite Elements Method
von: A. V. Marchuk, et al.
Veröffentlicht: (2020)
von: A. V. Marchuk, et al.
Veröffentlicht: (2020)
Finite Element Calculation of Clinching with Rigid Die of Three Steel Sheets
von: Kaščák, L., et al.
Veröffentlicht: (2017)
von: Kaščák, L., et al.
Veröffentlicht: (2017)
On the high rise
von: L. Moroz
Veröffentlicht: (2013)
von: L. Moroz
Veröffentlicht: (2013)
Nonlinear dynamic finite element analysis of thick transversly flexible sandwich panel on elastic foundation with account of damage progression in time. Part 1. Three-dimensional formulation and two-dimensional plate theory
von: Perel, V.Y.
Veröffentlicht: (2005)
von: Perel, V.Y.
Veröffentlicht: (2005)
Study of Composite Fiber Reinforcement of Cracked Thin-Walled Pressure Vessels Utilizing Multi-Scaling Technique Based on Extended Finite Element Method
von: Mirmohammad, S.H., et al.
Veröffentlicht: (2018)
von: Mirmohammad, S.H., et al.
Veröffentlicht: (2018)
Analysis by Finite Element Method to Redesign a Jointed-Telescopic Crane for Elevation of Personnel
von: Diosdado-De la Peña, J.A., et al.
Veröffentlicht: (2017)
von: Diosdado-De la Peña, J.A., et al.
Veröffentlicht: (2017)
Side-slipping of a radiating particle
von: Artru, X., et al.
Veröffentlicht: (2001)
von: Artru, X., et al.
Veröffentlicht: (2001)
6-Hour Work Day Instead of Usual 8: Feasibility (or Benefits) of Implementation for Ukrainian Enterprises
von: Vorontsov, M., et al.
Veröffentlicht: (2019)
von: Vorontsov, M., et al.
Veröffentlicht: (2019)
6-Hour Work Day Instead of Usual 8: Feasibility (or Benefits) of Implementation for Ukrainian Enterprises
von: M. Vorontsov, et al.
Veröffentlicht: (2019)
von: M. Vorontsov, et al.
Veröffentlicht: (2019)
Behavior of Self-Compacting Concrete-Filled Steel Tube Columns with Inclined Stiffener Ribs under Axial Compression
von: Liang, W., et al.
Veröffentlicht: (2017)
von: Liang, W., et al.
Veröffentlicht: (2017)
Fracture and Fatigue Analysis for a Cracked Carabiner Using 3D Finite Element Simulations
von: Aliha, M.R.M., et al.
Veröffentlicht: (2015)
von: Aliha, M.R.M., et al.
Veröffentlicht: (2015)
History of Rise and Development
von: O. F. Hloba
Veröffentlicht: (2015)
von: O. F. Hloba
Veröffentlicht: (2015)
Electro-viscoelasticity problem for multi-connected plates
von: S. A. Kaloerov, et al.
Veröffentlicht: (2014)
von: S. A. Kaloerov, et al.
Veröffentlicht: (2014)
A Problem of Electromagnetoviscoelasticity for Multi-Connected Plates
von: S. A. Kaloerov, et al.
Veröffentlicht: (2015)
von: S. A. Kaloerov, et al.
Veröffentlicht: (2015)
Projestive-iterative schemes for the finite element method realization in the problems of deformation for plates with holes and inclusions
von: E. L. Hart, et al.
Veröffentlicht: (2013)
von: E. L. Hart, et al.
Veröffentlicht: (2013)
The Role of the Usual and Transformed Phraseological Units in the Novel "Katarsys" by Vitalii Matsko
von: H. Stukan, et al.
Veröffentlicht: (2016)
von: H. Stukan, et al.
Veröffentlicht: (2016)
Effect of Length of External Bar at Soffit on the Performance of Retrofitted RC Beams – A Finite Element Study
von: Vasudevan, G., et al.
Veröffentlicht: (2017)
von: Vasudevan, G., et al.
Veröffentlicht: (2017)
Finite Element Analysis of Thermoelastic Fiber-Reinforced Anisotropic Hollow Cylinder with Dual-Phase-Lag Model
von: Hobiny, A.D., et al.
Veröffentlicht: (2018)
von: Hobiny, A.D., et al.
Veröffentlicht: (2018)
Experimental Study and Finite Element Analysis of Critical Stresses of Reinforced Thermoplastic Pipes under Various Loads
von: Li, G.H., et al.
Veröffentlicht: (2016)
von: Li, G.H., et al.
Veröffentlicht: (2016)
Slipping contact of a punch with an elastic wedge
von: V. I. Ostryk, et al.
Veröffentlicht: (2011)
von: V. I. Ostryk, et al.
Veröffentlicht: (2011)
Three-Dimensional Finite Element Analysis of Tensile-Shear Spot-Welded Joints in Tensile and Compressive Loading Conditions
von: Adib, H., et al.
Veröffentlicht: (2004)
von: Adib, H., et al.
Veröffentlicht: (2004)
Resistance of the micromycetes isolated from the chernozem usual and technozems to the joint influence of cadmium nickel, copper, zinc, and lead
von: V. M. Hryshko, et al.
Veröffentlicht: (2014)
von: V. M. Hryshko, et al.
Veröffentlicht: (2014)
ESTIMATION OF THE SLIP LENGTH IN THE FLOW OF LIQUID IN MICRO-CHANNELS
von: Kovetska, Y.Y.
Veröffentlicht: (2018)
von: Kovetska, Y.Y.
Veröffentlicht: (2018)
Estimation of the slip length in the flow of liquid in micro-channels
von: Ju. Ju. Kovetskaja
Veröffentlicht: (2018)
von: Ju. Ju. Kovetskaja
Veröffentlicht: (2018)
The instability of slipping flow in a curvilinear porous microchannel
von: Ju. Ju. Kovetskaja, et al.
Veröffentlicht: (2018)
von: Ju. Ju. Kovetskaja, et al.
Veröffentlicht: (2018)
Column phenomenon: the continuation of scientific discussion
von: O. Deiak-Yakobyshyn
Veröffentlicht: (2011)
von: O. Deiak-Yakobyshyn
Veröffentlicht: (2011)
Solving the problem of bending plate finite element method using splines of the 5th degree on the triangular grid
von: Литвин, О. М., et al.
Veröffentlicht: (2017)
von: Литвин, О. М., et al.
Veröffentlicht: (2017)
Solving the problem of bending plate finite element method using splines of the 5th degree on the triangular grid
von: Литвин, О. М., et al.
Veröffentlicht: (2017)
von: Литвин, О. М., et al.
Veröffentlicht: (2017)
Solving the problem of bending plate finite element method using splines of the 5th degree on the triangular grid
von: O. M. Lytvyn, et al.
Veröffentlicht: (2017)
von: O. M. Lytvyn, et al.
Veröffentlicht: (2017)
Convergence of the finite element algorithm for the determination of the minimum natural frequency of the strip-plate with the use of some models of deformation
von: T. V. Horiachko, et al.
Veröffentlicht: (2018)
von: T. V. Horiachko, et al.
Veröffentlicht: (2018)
Stress State of the Pulled Up Adhesive Connection of the Plate with the Circular Hole and the Concentrically Placed Plate
von: S. S. Kuriennov, et al.
Veröffentlicht: (2022)
von: S. S. Kuriennov, et al.
Veröffentlicht: (2022)
Rise of the East Slavic Written Language
von: V. Nimchuk
Veröffentlicht: (2000)
von: V. Nimchuk
Veröffentlicht: (2000)
Ähnliche Einträge
-
C2 Property of Column Finite Matrix Rings
von: Liang Shen, et al.
Veröffentlicht: (2014) -
$C2$ Property of Column Finite Matrix Rings
von: Chen, Jianlong, et al.
Veröffentlicht: (2014) -
Application of polymer-composite materials for elements of burille column
von: Ye. Chernova
Veröffentlicht: (2018) -
Reproduction of Belarusian proper names in Ukrainian language: codification and usual aspects
von: O. Skopnenko
Veröffentlicht: (2018) -
Allowing for residual stresses in the cross-sections of compressed l-shaped columns during their design
von: Golodnov, A.I.
Veröffentlicht: (2001)