Дослідження шляхів інтенсифікації агломераційного процесу в умовах акціонерного товариства «Покровський гірничо-збагачувальний комбінат»
The use in the sinter charge of a large proportion of fine concentrate and waste metallurgical production, fluctuations in the composition of the sinter charge and the quality of its preparation, deviations from the norm of technological parameters of sintering and low efficiency of machined sintere...
Збережено в:
| Дата: | 2023 |
|---|---|
| Автори: | , , , , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2023
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/1 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471901944971264 |
|---|---|
| author | Шуваєв, Сергій Семірягін, Сергій Нізяєв, Костянтин Бойко, Максим Стоянов, Олександр Ягольник, Максим |
| author_facet | Шуваєв, Сергій Семірягін, Сергій Нізяєв, Костянтин Бойко, Максим Стоянов, Олександр Ягольник, Максим |
| author_sort | Шуваєв, Сергій |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-05-18T07:29:52Z |
| description | The use in the sinter charge of a large proportion of fine concentrate and waste metallurgical production, fluctuations in the composition of the sinter charge and the quality of its preparation, deviations from the norm of technological parameters of sintering and low efficiency of machined sintered product, reduces the productivity of sintering machines, leads to increased fuel consumption, degrades the quality of the sinter. Under such conditions, the importance of prepreparation of the charge and the necessary use of methods to intensify the sintering process increases.
Currently, a significant number of ways to intensify the sintering process is known, the effectiveness of each depends on the specific conditions of the sinter plant, the installed equipment and raw materials used.
The efficiency of various ways to increase the intensity of the sintering process and the quality of the sinter for the conditions of the Joint Stock Company “Pokrovskiy Girnycho-Zbagachuvalniy Kombinat” was investigated with the definition of rational technological measures aimed at improving the operation of the enterprise. The research was carried out on a laboratory sinter plant using charge materials and technological conditions of the Bogdanov sinter factory.
According to the results of research, it is established that the size of charge materials used in the sinter plant exceeds the maximum allowable size. This reduces the technical and economic performance of the sintering process and prevents the production of high quality agglomerate. To improve the performance of sintering machines in the studied conditions, it is recommended to use pre-treatment of charge materials before use, namely crushing to obtain a rational particle size. In addition, the use of lime, as a partial replacement of limestone in the flux mixture, will improve the quality of the sinter. |
| first_indexed | 2026-03-12T15:49:54Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-1 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:49:54Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-12023-05-18T07:29:52Z Research of ways of intensification of agglomeration process for Joint Stock Company “Pokrovskiy Girnycho-Zbagachuvalniy Kombinat” Дослідження шляхів інтенсифікації агломераційного процесу в умовах акціонерного товариства «Покровський гірничо-збагачувальний комбінат» Шуваєв, Сергій Семірягін, Сергій Нізяєв, Костянтин Бойко, Максим Стоянов, Олександр Ягольник, Максим bdbdbdb sbbsrbrsb snsfbnnrsbn агломерація, інтенсифікація, підготовка шихти, якість агломерату, продуктивність, вапно The use in the sinter charge of a large proportion of fine concentrate and waste metallurgical production, fluctuations in the composition of the sinter charge and the quality of its preparation, deviations from the norm of technological parameters of sintering and low efficiency of machined sintered product, reduces the productivity of sintering machines, leads to increased fuel consumption, degrades the quality of the sinter. Under such conditions, the importance of prepreparation of the charge and the necessary use of methods to intensify the sintering process increases. Currently, a significant number of ways to intensify the sintering process is known, the effectiveness of each depends on the specific conditions of the sinter plant, the installed equipment and raw materials used. The efficiency of various ways to increase the intensity of the sintering process and the quality of the sinter for the conditions of the Joint Stock Company “Pokrovskiy Girnycho-Zbagachuvalniy Kombinat” was investigated with the definition of rational technological measures aimed at improving the operation of the enterprise. The research was carried out on a laboratory sinter plant using charge materials and technological conditions of the Bogdanov sinter factory. According to the results of research, it is established that the size of charge materials used in the sinter plant exceeds the maximum allowable size. This reduces the technical and economic performance of the sintering process and prevents the production of high quality agglomerate. To improve the performance of sintering machines in the studied conditions, it is recommended to use pre-treatment of charge materials before use, namely crushing to obtain a rational particle size. In addition, the use of lime, as a partial replacement of limestone in the flux mixture, will improve the quality of the sinter. Використання в агломераційній шихті великої частки дрібнодисперсного концентрату і відходів металургійного виробництва, коливання складу агломераційної шихти та якості її підготовки, відхилення від норми технологічних параметрів спікання та низька ефективність механічної обробки спеченого продукту, знижує продуктивність агломераційних машин, призводить до підвищення витрати палива, погіршує якість агломерату. За таких умов зростає значення попередньої підготовки шихти та необхідне застосування способів інтенсифікації процесу спікання. Наразі відома значна кількість способів інтенсифікації агломераційного процесу, ефективність кожного залежить від конкретних умов агломераційної фабрики, встановленого обладнання і сировинних матеріалів, які застосовуються. В роботі було досліджено ефективність різних способів підвищення інтенсивності агломераційного процесу і якості агломерату для умов акціонерного товариства «Покровський гірничо-збагачувальний комбінат» з визначенням раціональних технологічних заходів, спрямованих на покращення роботи підприємства. Дослідження проводилися на лабораторній агломераційній установці з використанням шихтових матеріалів та технологічних умов Богданівської агломераційної фабрики. За результатами досліджень встановлено, що крупність шихтових матеріалів, які застосовуються на агломераційній фабриці, перевищує максимально допустимий розмір. Це знижує техніко-економічні показники процесу спікання та не дозволяє отримувати агломерат високої якості. Для покращення показників роботи агломераційних машин в досліджуваних умовах рекомендується використовувати попередню підготовку шихтових матеріалів перед використанням, а саме – дроблення для отримання раціональної крупності часток. Крім того, використання вапна, як часткова заміна вапняку у флюсовій суміші, дозволить підвищити якість агломерату. Physico-technological Institute of Metals and Alloys 2023-05-18 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/1 Metal and Casting of Ukraine; Vol. 30 No. 1 (2022): Метал та лиття України Метал та лиття України ; Том 30 № 1 (2022): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/1/1 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | агломерація інтенсифікація підготовка шихти якість агломерату продуктивність вапно Шуваєв, Сергій Семірягін, Сергій Нізяєв, Костянтин Бойко, Максим Стоянов, Олександр Ягольник, Максим Дослідження шляхів інтенсифікації агломераційного процесу в умовах акціонерного товариства «Покровський гірничо-збагачувальний комбінат» |
| title | Дослідження шляхів інтенсифікації агломераційного процесу в умовах акціонерного товариства «Покровський гірничо-збагачувальний комбінат» |
| title_alt | Research of ways of intensification of agglomeration process for Joint Stock Company “Pokrovskiy Girnycho-Zbagachuvalniy Kombinat” |
| title_full | Дослідження шляхів інтенсифікації агломераційного процесу в умовах акціонерного товариства «Покровський гірничо-збагачувальний комбінат» |
| title_fullStr | Дослідження шляхів інтенсифікації агломераційного процесу в умовах акціонерного товариства «Покровський гірничо-збагачувальний комбінат» |
| title_full_unstemmed | Дослідження шляхів інтенсифікації агломераційного процесу в умовах акціонерного товариства «Покровський гірничо-збагачувальний комбінат» |
| title_short | Дослідження шляхів інтенсифікації агломераційного процесу в умовах акціонерного товариства «Покровський гірничо-збагачувальний комбінат» |
| title_sort | дослідження шляхів інтенсифікації агломераційного процесу в умовах акціонерного товариства «покровський гірничо-збагачувальний комбінат» |
| topic | агломерація інтенсифікація підготовка шихти якість агломерату продуктивність вапно |
| topic_facet | bdbdbdb sbbsrbrsb snsfbnnrsbn агломерація інтенсифікація підготовка шихти якість агломерату продуктивність вапно |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/1 |
| work_keys_str_mv | AT šuvaêvsergíj researchofwaysofintensificationofagglomerationprocessforjointstockcompanypokrovskiygirnychozbagachuvalniykombinat AT semírâgínsergíj researchofwaysofintensificationofagglomerationprocessforjointstockcompanypokrovskiygirnychozbagachuvalniykombinat AT nízâêvkostântin researchofwaysofintensificationofagglomerationprocessforjointstockcompanypokrovskiygirnychozbagachuvalniykombinat AT bojkomaksim researchofwaysofintensificationofagglomerationprocessforjointstockcompanypokrovskiygirnychozbagachuvalniykombinat AT stoânovoleksandr researchofwaysofintensificationofagglomerationprocessforjointstockcompanypokrovskiygirnychozbagachuvalniykombinat AT âgolʹnikmaksim researchofwaysofintensificationofagglomerationprocessforjointstockcompanypokrovskiygirnychozbagachuvalniykombinat AT šuvaêvsergíj doslídžennâšlâhívíntensifíkacííaglomeracíjnogoprocesuvumovahakcíonernogotovaristvapokrovsʹkijgírničozbagačuvalʹnijkombínat AT semírâgínsergíj doslídžennâšlâhívíntensifíkacííaglomeracíjnogoprocesuvumovahakcíonernogotovaristvapokrovsʹkijgírničozbagačuvalʹnijkombínat AT nízâêvkostântin doslídžennâšlâhívíntensifíkacííaglomeracíjnogoprocesuvumovahakcíonernogotovaristvapokrovsʹkijgírničozbagačuvalʹnijkombínat AT bojkomaksim doslídžennâšlâhívíntensifíkacííaglomeracíjnogoprocesuvumovahakcíonernogotovaristvapokrovsʹkijgírničozbagačuvalʹnijkombínat AT stoânovoleksandr doslídžennâšlâhívíntensifíkacííaglomeracíjnogoprocesuvumovahakcíonernogotovaristvapokrovsʹkijgírničozbagačuvalʹnijkombínat AT âgolʹnikmaksim doslídžennâšlâhívíntensifíkacííaglomeracíjnogoprocesuvumovahakcíonernogotovaristvapokrovsʹkijgírničozbagačuvalʹnijkombínat |