Некоторые особенности сушки литейных форм и стержней в области стоячих волн сверхвысокочастотного излучения
The article discusses some of the features of drying sand-liquid glass foundry molds and cores in the region of standing waves of microwave radiation of low power (700–1200 W) with a frequency of 2450 MHz and a wavelength of 122.5 mm. It has been established that convective-thermal drying at 90–100...
Збережено в:
| Дата: | 2023 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2023
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/100 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471896669585408 |
|---|---|
| author | Солоненко, Л. И. |
| author_facet | Солоненко, Л. И. |
| author_sort | Солоненко, Л. И. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-06-11T05:57:41Z |
| description | The article discusses some of the features of drying sand-liquid glass foundry molds and cores in the region of standing waves of microwave radiation of low power (700–1200 W) with a frequency of 2450 MHz and a wavelength of 122.5 mm.
It has been established that convective-thermal drying at 90–100 °C of a sand-liquid glass mixture provides casting molds/ cores with high strength and gas permeability, low crumbling. At the same time, drying by microwave radiation of low power of the same mixture dramatically reduces the strength and gas permeability and increases its crumbling. Drying by microwave radiation of the mixture in the foundry tool does not completely remove moisture from it. Moreover, the nature of the distribution of residual moisture along the mold/core does not depend on the duration of its treatment with microwave radiation in the foundry tool, the power of the magnetron and the frequency of rotation of the table of the microwave oven.
According to the results of irrelevant heating and evaporation of water in the working space of the microwave oven, it was found that in the group of simultaneously heated water samples of different weights, but of the same geometric dimensions and equally spaced from the axis of rotation of the microwave oven table, the duration of water evaporation will be almost the same. For similar water samples of the same mass, under the same conditions, the duration of water evaporation will differ by ± (4–16) %, which is explained by the difference in the initial position of the samples in relation to the distribution of standing waves in the working space of the microwave oven. That is, the initial position of the hanging on the table in the region of the standing waves of the microwave oven is one of the main factors that determines the duration of heating and evaporation of water from them. An increase in the power of the magnetron of the microwave oven from 700 to 1200 W increases the uniformity of the duration of the evaporation of water from the samples, reducing this time difference from 16 % at a power of a magnetron of 700 W to 3.6 % at a power of a magnetron of 1200 W. |
| first_indexed | 2026-03-12T15:49:49Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-100 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:49:49Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-1002023-06-11T05:57:41Z Some features of drying casting forms and cores in the field of standing waves of microwave radiation Некоторые особенности сушки литейных форм и стержней в области стоячих волн сверхвысокочастотного излучения Солоненко, Л. И. core form drying water heating evaporation radiation magnetron стержень форма сушка вода нагрев испарение излучение магнетрон The article discusses some of the features of drying sand-liquid glass foundry molds and cores in the region of standing waves of microwave radiation of low power (700–1200 W) with a frequency of 2450 MHz and a wavelength of 122.5 mm. It has been established that convective-thermal drying at 90–100 °C of a sand-liquid glass mixture provides casting molds/ cores with high strength and gas permeability, low crumbling. At the same time, drying by microwave radiation of low power of the same mixture dramatically reduces the strength and gas permeability and increases its crumbling. Drying by microwave radiation of the mixture in the foundry tool does not completely remove moisture from it. Moreover, the nature of the distribution of residual moisture along the mold/core does not depend on the duration of its treatment with microwave radiation in the foundry tool, the power of the magnetron and the frequency of rotation of the table of the microwave oven. According to the results of irrelevant heating and evaporation of water in the working space of the microwave oven, it was found that in the group of simultaneously heated water samples of different weights, but of the same geometric dimensions and equally spaced from the axis of rotation of the microwave oven table, the duration of water evaporation will be almost the same. For similar water samples of the same mass, under the same conditions, the duration of water evaporation will differ by ± (4–16) %, which is explained by the difference in the initial position of the samples in relation to the distribution of standing waves in the working space of the microwave oven. That is, the initial position of the hanging on the table in the region of the standing waves of the microwave oven is one of the main factors that determines the duration of heating and evaporation of water from them. An increase in the power of the magnetron of the microwave oven from 700 to 1200 W increases the uniformity of the duration of the evaporation of water from the samples, reducing this time difference from 16 % at a power of a magnetron of 700 W to 3.6 % at a power of a magnetron of 1200 W. В статье рассмотрены некоторые особенности сушки песчано-жидкостекольных литейных форм и стержней в области стоячих волн сверхвысокочастотного излучения малой мощности (700–1200 Вт) с частотой 2450 МГц и длиной волны 122,5 мм. Установлено, что конвективно-тепловая сушка при 90–100 °С песчано-жидкостекольной смеси обеспечивает литейным формам/стержням высокую прочность и газопроницаемость, низкую осыпаемость. В тоже время сушка сверхвысокочастотным излучением малой мощности той же смеси резко снижает прочность и газопроницаемость и повышает ее осыпаемость. Сушка сверхвысокочастотным излучением смеси в литейной оснастке не приводит к полному удалению из нее влаги. При этом характер распределения остаточной влаги вдоль формы/ стержня не зависит от длительности его обработки сверхвысокочастотным излучением в литейной оснастке, мощности магнетрона и частоты вращения стола СВЧ-печи. По результатам безотносительного нагрева и испарения воды в рабочем пространстве СВЧ-печи установлено, что в группе одновременно нагреваемых навесок воды разной массы, но одинаковых  геометрических размеров и равноудаленных от оси вращения стола СВЧ-печи, длительность испарения воды будет практически одинаковой. Для аналогичных навесок воды одинаковой массы при этих же условиях длительность испареaния воды будет различаться на ± (4–16) %, что объясняется различием в начальном положении навесок по отношению к распределению стоячих волн в рабочем пространстве СВЧ-печи. То есть, начальное положение навесок на столе в области стоячих волн СВЧ-печи является одним из основных факторов, который предопределяет длительность нагрева и испарения из них воды. При этом увеличение мощности магнетрона СВЧ-печи от 700 до 1200 Вт повышает степень равномерности длительности испарения воды из навесок, сокращая эту разницу во времени с 16 % при мощности магнетрона 700 Вт до 3,6 % при мощности магнетрона 1200 Вт. Physico-technological Institute of Metals and Alloys 2023-06-11 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/100 Metal and Casting of Ukraine; Vol. 28 No. 1 (2020): Метал та лиття України Метал та лиття України ; Том 28 № 1 (2020): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/100/100 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | стержень форма сушка вода нагрев испарение излучение магнетрон Солоненко, Л. И. Некоторые особенности сушки литейных форм и стержней в области стоячих волн сверхвысокочастотного излучения |
| title | Некоторые особенности сушки литейных форм и стержней в области стоячих волн сверхвысокочастотного излучения |
| title_alt | Some features of drying casting forms and cores in the field of standing waves of microwave radiation |
| title_full | Некоторые особенности сушки литейных форм и стержней в области стоячих волн сверхвысокочастотного излучения |
| title_fullStr | Некоторые особенности сушки литейных форм и стержней в области стоячих волн сверхвысокочастотного излучения |
| title_full_unstemmed | Некоторые особенности сушки литейных форм и стержней в области стоячих волн сверхвысокочастотного излучения |
| title_short | Некоторые особенности сушки литейных форм и стержней в области стоячих волн сверхвысокочастотного излучения |
| title_sort | некоторые особенности сушки литейных форм и стержней в области стоячих волн сверхвысокочастотного излучения |
| topic | стержень форма сушка вода нагрев испарение излучение магнетрон |
| topic_facet | core form drying water heating evaporation radiation magnetron стержень форма сушка вода нагрев испарение излучение магнетрон |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/100 |
| work_keys_str_mv | AT solonenkoli somefeaturesofdryingcastingformsandcoresinthefieldofstandingwavesofmicrowaveradiation AT solonenkoli nekotoryeosobennostisuškilitejnyhformisteržnejvoblastistoâčihvolnsverhvysokočastotnogoizlučeniâ |