Використання зонального охолодження для управління швидкістю затвердіння виливків зі сплаву АК7ч
The aim of the work was to study the effect of zonal cooling, i. e., various coolants that accelerate heat removal on the solidification rate in local thickenings (sockets). In the work, standard methods were used to determine zonal cooling, solidification rate, and metal density. For the experiment...
Збережено в:
| Дата: | 2023 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2023
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/109 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471941582192640 |
|---|---|
| author | Лисенко, Т.В. Бондар, О.А. Крейцер, К.О. Козішкурт, Є.М. |
| author_facet | Лисенко, Т.В. Бондар, О.А. Крейцер, К.О. Козішкурт, Є.М. |
| author_sort | Лисенко, Т.В. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-06-12T07:37:20Z |
| description | The aim of the work was to study the effect of zonal cooling, i. e., various coolants that accelerate heat removal on the solidification rate in local thickenings (sockets). In the work, standard methods were used to determine zonal cooling, solidification rate, and metal density. For the experiments, equipment was developed that allows filling prototypes from two metal ducts. As the alloy under study, AK7ch was used, as the most common for low-pressure casting. Copper liners and steel water-cooled liners were used as coolants for local thickenings. The density control of the obtained castings was carried out according to the hardness measured by the Brinell method.
The dependences of the influence of zonal cooling on the hardening rate of local thickening, which is determined by the density of the metal structure depending on cooling by both copper inserts and water, are revealed.
Ideas about the influence of zonal water cooling in low-pressure casting, on reducing the shrinkage loosens in the thickening of the casting and reducing the holding time of the metal under pressure were further developed.
The research results showed that the use of zonal cooling of local thickenings of the casting at all studied thicknesses increases the hardness index. The creation of directional solidification and reduction of the holding time of castings in the chill mold increase productivity, which also plays an important role in foundry.
Use of zonal water cooling for low-pressure casting of the "filter housing" part on the mod installation U95A allowed to eliminate shrinkage looseness in the local thickening and reduce the holding time of the casting under pressure, which in turn allowed to increase the productivity of the installation. |
| first_indexed | 2026-03-12T15:50:32Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-109 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | English |
| last_indexed | 2026-03-12T15:50:32Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-1092023-06-12T07:37:20Z The use of zonal cooling to control the solidification rate of AK7ch alloy castings Використання зонального охолодження для управління швидкістю затвердіння виливків зі сплаву АК7ч Лисенко, Т.В. Бондар, О.А. Крейцер, К.О. Козішкурт, Є.М. low pressure casting zone cooling hardening hardness лиття під низьким тиском зональне охолодження затвердіння твердість The aim of the work was to study the effect of zonal cooling, i. e., various coolants that accelerate heat removal on the solidification rate in local thickenings (sockets). In the work, standard methods were used to determine zonal cooling, solidification rate, and metal density. For the experiments, equipment was developed that allows filling prototypes from two metal ducts. As the alloy under study, AK7ch was used, as the most common for low-pressure casting. Copper liners and steel water-cooled liners were used as coolants for local thickenings. The density control of the obtained castings was carried out according to the hardness measured by the Brinell method. The dependences of the influence of zonal cooling on the hardening rate of local thickening, which is determined by the density of the metal structure depending on cooling by both copper inserts and water, are revealed. Ideas about the influence of zonal water cooling in low-pressure casting, on reducing the shrinkage loosens in the thickening of the casting and reducing the holding time of the metal under pressure were further developed. The research results showed that the use of zonal cooling of local thickenings of the casting at all studied thicknesses increases the hardness index. The creation of directional solidification and reduction of the holding time of castings in the chill mold increase productivity, which also plays an important role in foundry. Use of zonal water cooling for low-pressure casting of the "filter housing" part on the mod installation U95A allowed to eliminate shrinkage looseness in the local thickening and reduce the holding time of the casting under pressure, which in turn allowed to increase the productivity of the installation. Метою роботи було вивчення впливу зонального охолодження, тобто різних охолоджувальних засобів, що прискорюють тепловідвід, на швидкість затвердіння в місцевих потовщеннях (бобишках). У роботі були застосовані стандартні методики визначення зонального охолодження, швидкості затвердіння, щільності металу. Для проведення експериментів було розроблено оснащення, що дозволяє заповнювати дослідні зразки з двох металопроводів. В якості досліджуваного сплаву використовувався АК7ч, як найбільш поширений для лиття під низьким тиском. В якості охолоджуючих засобів місцевих потовщень використовувалися вкладиші з міді, а також сталеві водоохолоджувані вкладиші. Контроль щільності одержуваних виливків здійснювався за твердістю, яка вимірюється методом Брінелля. Виявлено залежності впливу зонального охолодження на швидкість затвердіння місцевого потовщення, яка визначається за щільністю структури металу в залежності від охолодження як мідними вставками, так і водою. Отримали подальший розвиток уявлення про вплив зонального водяного охолодження при литті під низьким тиском на зниження усадочних дефектів в потовщеннях виливка і зменшенні часу витримки металу під тиском. Результати досліджень показали, що використання зонального охолодження місцевих потовщень виливка на всіх досліджуваних товщинах сприяє збільшенню твердості. Створення спрямованого затвердіння і зменшення часу витримки виливків у кокілі сприяють збільшенню продуктивності, що так само відіграє важливу роль у ливарному виробництві. Використання зонального водяного охолодження при литті під низьким тиском деталі «корпус фільтра» на установці мод. У95А дозволило виключити усадкові рихлоти в місцевому потовщенні і зменшити час витримки виливка під тиском, що в свою чергу дозволило збільшити продуктивність установки. Physico-technological Institute of Metals and Alloys 2023-06-12 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/109 Metal and Casting of Ukraine; Vol. 28 No. 2 (2020): Метал та лиття України Метал та лиття України ; Том 28 № 2 (2020): Метал та лиття України 2706-5529 2077-1304 en https://www.metalsandcasting.com/index.php/mcu/article/view/109/110 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | лиття під низьким тиском зональне охолодження затвердіння твердість Лисенко, Т.В. Бондар, О.А. Крейцер, К.О. Козішкурт, Є.М. Використання зонального охолодження для управління швидкістю затвердіння виливків зі сплаву АК7ч |
| title | Використання зонального охолодження для управління швидкістю затвердіння виливків зі сплаву АК7ч |
| title_alt | The use of zonal cooling to control the solidification rate of AK7ch alloy castings |
| title_full | Використання зонального охолодження для управління швидкістю затвердіння виливків зі сплаву АК7ч |
| title_fullStr | Використання зонального охолодження для управління швидкістю затвердіння виливків зі сплаву АК7ч |
| title_full_unstemmed | Використання зонального охолодження для управління швидкістю затвердіння виливків зі сплаву АК7ч |
| title_short | Використання зонального охолодження для управління швидкістю затвердіння виливків зі сплаву АК7ч |
| title_sort | використання зонального охолодження для управління швидкістю затвердіння виливків зі сплаву ак7ч |
| topic | лиття під низьким тиском зональне охолодження затвердіння твердість |
| topic_facet | low pressure casting zone cooling hardening hardness лиття під низьким тиском зональне охолодження затвердіння твердість |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/109 |
| work_keys_str_mv | AT lisenkotv theuseofzonalcoolingtocontrolthesolidificationrateofak7challoycastings AT bondaroa theuseofzonalcoolingtocontrolthesolidificationrateofak7challoycastings AT krejcerko theuseofzonalcoolingtocontrolthesolidificationrateofak7challoycastings AT kozíškurtêm theuseofzonalcoolingtocontrolthesolidificationrateofak7challoycastings AT lisenkotv vikoristannâzonalʹnogooholodžennâdlâupravlínnâšvidkístûzatverdínnâvilivkívzísplavuak7č AT bondaroa vikoristannâzonalʹnogooholodžennâdlâupravlínnâšvidkístûzatverdínnâvilivkívzísplavuak7č AT krejcerko vikoristannâzonalʹnogooholodžennâdlâupravlínnâšvidkístûzatverdínnâvilivkívzísplavuak7č AT kozíškurtêm vikoristannâzonalʹnogooholodžennâdlâupravlínnâšvidkístûzatverdínnâvilivkívzísplavuak7č AT lisenkotv useofzonalcoolingtocontrolthesolidificationrateofak7challoycastings AT bondaroa useofzonalcoolingtocontrolthesolidificationrateofak7challoycastings AT krejcerko useofzonalcoolingtocontrolthesolidificationrateofak7challoycastings AT kozíškurtêm useofzonalcoolingtocontrolthesolidificationrateofak7challoycastings |