Вивчення ливарних властивостей фторфлогопітових розплавів
The article presents the results of studying the viscosity and fluidity of fluoroflogopite melts of various chemical composition. For convenience of calculations, the chemical composition of the melt is expressed in terms of a generalized indicator – aluminosilicate module, which is the ratio of the...
Gespeichert in:
| Datum: | 2023 |
|---|---|
| Hauptverfasser: | , |
| Format: | Artikel |
| Sprache: | Ukrainisch |
| Veröffentlicht: |
Physico-technological Institute of Metals and Alloys
2023
|
| Schlagworte: | |
| Online Zugang: | https://www.metalsandcasting.com/index.php/mcu/article/view/125 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Metal and Casting of Ukraine |
Institution
Metal and Casting of Ukraine| _version_ | 1859471947516084224 |
|---|---|
| author | Малявін, А.Г. Кузьменко, О.А. |
| author_facet | Малявін, А.Г. Кузьменко, О.А. |
| author_sort | Малявін, А.Г. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-06-14T07:58:04Z |
| description | The article presents the results of studying the viscosity and fluidity of fluoroflogopite melts of various chemical composition. For convenience of calculations, the chemical composition of the melt is expressed in terms of a generalized indicator – aluminosilicate module, which is the ratio of the ionic amount of grid-forming silicon cations Si4+ and aluminum Al3+. The viscosity of fluoroflogopite melts in the range of cooking temperatures (1450–1500 °C) is 0.25–0.53 n·s/m2. The low viscosity of fluoroflogopite melts during the melting of the mixture and the preparation of melts contributes to the accelerated flow of solid-phase reactions and to obtain a homogeneous homogeneous melt, and when pouring it into casting molds, to obtain high-quality shaped stone castings. The main influence on viscosity is exerted by temperature and, to a lesser extent, aluminosilicate module. The viscosity of fluoroflogopite melts increases with decreasing temperature exponentially until the process of crystallization and solidification begins. The low viscosity of fluoroflogopite melts is obviously a consequence of the depolymerizing effect of modifier cations (K1+, Mg2+, Ca2+) and fluorine anions (F1-) on the structural units of the melt, the total amount of which significantly exceeds the number of glass-forming cations (Si4+, Al3+). The study of fluidity showed that it linearly increases with increasing temperature and a decrease in aluminosilicate module. The equation of regression of the dependence of fluidity on temperature and aluminosilicate module is obtained. When pouring fluoroflogopite melt into casting molds in the temperature range of 1400–1450 °C, the fluidity is 360–480 mm. Such fluidity ensures a good filling of the molds with a melt and the production of shaped stone castings of a wide range. |
| first_indexed | 2026-03-12T15:50:38Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-125 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:50:38Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-1252023-06-14T07:58:04Z Study of foundry properties of fluoroflogopite melts Вивчення ливарних властивостей фторфлогопітових розплавів Малявін, А.Г. Кузьменко, О.А. fluoroflogopite melts viscosity castings fluidity shaped products фторфлогопітові розплави в'язкість виливки рідкоплинність фасонні вироби The article presents the results of studying the viscosity and fluidity of fluoroflogopite melts of various chemical composition. For convenience of calculations, the chemical composition of the melt is expressed in terms of a generalized indicator – aluminosilicate module, which is the ratio of the ionic amount of grid-forming silicon cations Si4+ and aluminum Al3+. The viscosity of fluoroflogopite melts in the range of cooking temperatures (1450–1500 °C) is 0.25–0.53 n·s/m2. The low viscosity of fluoroflogopite melts during the melting of the mixture and the preparation of melts contributes to the accelerated flow of solid-phase reactions and to obtain a homogeneous homogeneous melt, and when pouring it into casting molds, to obtain high-quality shaped stone castings. The main influence on viscosity is exerted by temperature and, to a lesser extent, aluminosilicate module. The viscosity of fluoroflogopite melts increases with decreasing temperature exponentially until the process of crystallization and solidification begins. The low viscosity of fluoroflogopite melts is obviously a consequence of the depolymerizing effect of modifier cations (K1+, Mg2+, Ca2+) and fluorine anions (F1-) on the structural units of the melt, the total amount of which significantly exceeds the number of glass-forming cations (Si4+, Al3+). The study of fluidity showed that it linearly increases with increasing temperature and a decrease in aluminosilicate module. The equation of regression of the dependence of fluidity on temperature and aluminosilicate module is obtained. When pouring fluoroflogopite melt into casting molds in the temperature range of 1400–1450 °C, the fluidity is 360–480 mm. Such fluidity ensures a good filling of the molds with a melt and the production of shaped stone castings of a wide range. У статті наведено результати вивчення в'язкості і рідкоплинності фторфлогопітових розплавів різного хімічного складу. Для зручності розрахунків хімічний склад розплаву виражений через узагальнений показник – алюмосилікатний модуль, який є відношенням іонної кількості сіткоутворюючих катіонів кремнію Si4+ і алюмінію Al3+. В'язкість фторфлогопітових розплавів в інтервалі температур приготування (1450–1500 °С) становить 0,25–0,53 н·с/м2. Невисока в'язкість фторфлогопітових розплавів в процесі плавлення шихти і приготування розплавів сприяє прискореному протіканню твердофазних реакцій і отриманню однорідного гомогенного розплаву, а при заливці його в ливарні форми – отриманню якісних фасонних каменелитих виливків. Основний вплив на в'язкість надає температура і меншою мірою алюмосилікатний модуль. В'язкість фторфлогопітових розплавів збільшується зі зниженням температури за експоненційним законом до того моменту, поки не починається процес кристалізації і затвердіння. Невелика в'язкість фторфлогопітових розплавів є, очевидно, наслідком деполімерізуючого впливу катіонів-модифікаторів (K1+, Mg2+, Ca2+) і аніонів фтору (F1-) на структурні одиниці розплаву, сумарна кількість яких значно перевищує кількість катіонів-склоутворювачів (Si4+, Al3+). Вивчення рідкоплинності показало, що вона лінійно збільшується з підвищенням температури і зменшенням алюмосилікатного модуля. Отримано рівняння регресії залежності рідкоплинності від температури і алюмосилікатного модуля. При заливці фторфлогопітового розплаву в ливарні форми в інтервалі температур 1400–1450 °С рідкоплинність становить 360–480 мм. Така рідкоплинність забезпечує гарне заповнення ливарних форм розплавом і отримання фасонних каменелитих виливків широкої номенклатури. Physico-technological Institute of Metals and Alloys 2023-06-14 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/125 Metal and Casting of Ukraine; Vol. 28 No. 3 (2020): Metal and Casting of Ukraine Метал та лиття України ; Том 28 № 3 (2020): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/125/126 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | фторфлогопітові розплави в'язкість виливки рідкоплинність фасонні вироби Малявін, А.Г. Кузьменко, О.А. Вивчення ливарних властивостей фторфлогопітових розплавів |
| title | Вивчення ливарних властивостей фторфлогопітових розплавів |
| title_alt | Study of foundry properties of fluoroflogopite melts |
| title_full | Вивчення ливарних властивостей фторфлогопітових розплавів |
| title_fullStr | Вивчення ливарних властивостей фторфлогопітових розплавів |
| title_full_unstemmed | Вивчення ливарних властивостей фторфлогопітових розплавів |
| title_short | Вивчення ливарних властивостей фторфлогопітових розплавів |
| title_sort | вивчення ливарних властивостей фторфлогопітових розплавів |
| topic | фторфлогопітові розплави в'язкість виливки рідкоплинність фасонні вироби |
| topic_facet | fluoroflogopite melts viscosity castings fluidity shaped products фторфлогопітові розплави в'язкість виливки рідкоплинність фасонні вироби |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/125 |
| work_keys_str_mv | AT malâvínag studyoffoundrypropertiesoffluoroflogopitemelts AT kuzʹmenkooa studyoffoundrypropertiesoffluoroflogopitemelts AT malâvínag vivčennâlivarnihvlastivostejftorflogopítovihrozplavív AT kuzʹmenkooa vivčennâlivarnihvlastivostejftorflogopítovihrozplavív |