Покращення якості агломерату шляхом удосконалення способу підготовки шихти
In order to obtain high-quality agglomerate stabilized in terms of grain size and strength, it is necessary to form a block structure with an optimal mineralogical composition of the interblock bond, which consists of calcium ferrites and iron-calcium olivines. An important technological step in obt...
Збережено в:
| Дата: | 2023 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2023
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/138 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471954089607168 |
|---|---|
| author | Бочка, В.В. Сова, А.В. Двоєглазова, А.В. |
| author_facet | Бочка, В.В. Сова, А.В. Двоєглазова, А.В. |
| author_sort | Бочка, В.В. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-06-17T15:43:25Z |
| description | In order to obtain high-quality agglomerate stabilized in terms of grain size and strength, it is necessary to form a block structure with an optimal mineralogical composition of the interblock bond, which consists of calcium ferrites and iron-calcium olivines. An important technological step in obtaining high-quality agglomerate is the preparation of sinter charge for sintering. One of the ways to improve the preparation of the sinter charge is the use of separate pelletizing of its components. It creates the ability to control the processes of formation and growth of crude granules, as well as the formation of their chemical composition and properties.
To create the conditions for the formation of agglomerate of a given composition and properties, a study of the characteristics of the preparation of the charge with the use of pre-prepared composites based on concentrate was carried out. Compositions were formed in such a way as to promote the emergence and growth of granules, and even distribution of the components of the charge in them.
The results of the study showed that the pelletizing of the charge using pre-prepared composites leads to: a significant reduction in the fraction amount of 0–1 mm; an increase in the equivalent diameter of the granules; reduction of the mean square deviation and coefficient of variation, indicating a more homogeneous granulometric composition of crude granules. At the same time, in the crude granules, the content of the fraction +10 mm is significantly increased, which negatively affects the sintering process of the agglomerate. The main reason for this may be the presence in the charge of large particles of ore and back, which significantly affect the processes of formation and growth of granules.
It has been experimentally proved that the best results are achieved by using a pre-prepared composite (basically 0.95–1.0 units) from concentrate, ore, 0–3 mm in size, lime and limestone, while the basicity of the residual charge is – 1.65-1.7 units. This creates the conditions for the formation of a strong interlacing bond, consisting mainly of olivines of low basicity and ferrites.
In accordance with the technological scheme of preparation of the charge, initially there is a dosage, mixing and pelletizing of the proposed composite, while the residual charge is dosed and mixed separately. After this, there is a common granulation of the composite and the residual charge in the drum granulator. Solid fuel, 0–7 mm in size, is fed to the charge at the end of the granulation. |
| first_indexed | 2026-03-12T15:50:44Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-138 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:50:44Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-1382023-06-17T15:43:25Z Improvement of the quality of agglomerate by improving the method of charge preparation Покращення якості агломерату шляхом удосконалення способу підготовки шихти Бочка, В.В. Сова, А.В. Двоєглазова, А.В. mineralogical composition bundle composite basicity olivines ferrites мінералогічний склад зв’язка композит основність олівіни ферити In order to obtain high-quality agglomerate stabilized in terms of grain size and strength, it is necessary to form a block structure with an optimal mineralogical composition of the interblock bond, which consists of calcium ferrites and iron-calcium olivines. An important technological step in obtaining high-quality agglomerate is the preparation of sinter charge for sintering. One of the ways to improve the preparation of the sinter charge is the use of separate pelletizing of its components. It creates the ability to control the processes of formation and growth of crude granules, as well as the formation of their chemical composition and properties. To create the conditions for the formation of agglomerate of a given composition and properties, a study of the characteristics of the preparation of the charge with the use of pre-prepared composites based on concentrate was carried out. Compositions were formed in such a way as to promote the emergence and growth of granules, and even distribution of the components of the charge in them. The results of the study showed that the pelletizing of the charge using pre-prepared composites leads to: a significant reduction in the fraction amount of 0–1 mm; an increase in the equivalent diameter of the granules; reduction of the mean square deviation and coefficient of variation, indicating a more homogeneous granulometric composition of crude granules. At the same time, in the crude granules, the content of the fraction +10 mm is significantly increased, which negatively affects the sintering process of the agglomerate. The main reason for this may be the presence in the charge of large particles of ore and back, which significantly affect the processes of formation and growth of granules. It has been experimentally proved that the best results are achieved by using a pre-prepared composite (basically 0.95–1.0 units) from concentrate, ore, 0–3 mm in size, lime and limestone, while the basicity of the residual charge is – 1.65-1.7 units. This creates the conditions for the formation of a strong interlacing bond, consisting mainly of olivines of low basicity and ferrites. In accordance with the technological scheme of preparation of the charge, initially there is a dosage, mixing and pelletizing of the proposed composite, while the residual charge is dosed and mixed separately. After this, there is a common granulation of the composite and the residual charge in the drum granulator. Solid fuel, 0–7 mm in size, is fed to the charge at the end of the granulation. Для отримання якісного агломерату, стабілізованого за крупністю і міцністю, необхідно формувати у ньому блокову структуру з оптимальним мінералогічним складом міжблокової зв’язки, яка складається з феритів кальцію та залізокальцієвих олівінів. Важливим технологічним етапом отримання якісного агломерату є підготовка агломераційної шихти до спікання. Одним із напрямів удосконалення підготовки агломераційної шихти є використання роздільного грудкування її компонентів. Воно створює можливість управління процесами утворення та зростання сирих гранул, а також формуванням їх хімічного складу і властивостей. Для створення умов формування агломерату заданого складу і властивостей було проведено дослідження особливостей підготовки шихти з використанням попередньо підготовлених композитів на основі концентрату. Композити формувалися таким чином, щоб сприяти зародженню і росту гранул, та рівномірному розподілу в них компонентів шихти. Результати дослідження показали, що грудкування шихти з використанням попередньо підготовлених композитів призводить до: суттєвого зменшення кількості фракції 0–1 мм; збільшення еквівалентного діаметру гранул; зменшення показників середньоквадратичного відхилення і коефіцієнта варіації, що свідчить про отримання більш однорідного гранулометричного складу сирих гранул. У той же час в сирих гранулах істотно збільшується вміст фракції +10 мм, яка негативно впливає на процес спікання агломерату. Основною причиною цього може бути наявність в шихті великих частинок руди і звороту, які суттєво впливають на процеси утворення і зростання гранул. Експериментальним шляхом доведено, що найкращі результати досягаються шляхом використання попередньо підготовленого композиту (основністю 0,95–1,0 од.) з концентрату, руди, розміром 0–3 мм, вапна і частини вапняку, в той час як основність залишкової шихти становить – 1,65-1,7 од. Це створює умови для формування міцної міжблокової зв’язки, що складається, в основному, з олівінів низької основності і феритів. Відповідно до технологічної схеми підготовки шихти, спочатку відбувається дозування, змішування і огрудкування запропонованого композиту, при цьому залишкова шихта дозується і змішується окремо. Після цього відбувається спільна грануляція композиту і залишкової шихти в барабані-грануляторі. Тверде паливо, розміром 0–7 мм, подається в шихту в кінці грануляції. Physico-technological Institute of Metals and Alloys 2023-06-17 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/138 Metal and Casting of Ukraine; Vol. 27 No. 1-2 (2019): Metal and Casting of Ukraine Метал та лиття України ; Том 27 № 1-2 (2019): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/138/139 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | мінералогічний склад зв’язка композит основність олівіни ферити Бочка, В.В. Сова, А.В. Двоєглазова, А.В. Покращення якості агломерату шляхом удосконалення способу підготовки шихти |
| title | Покращення якості агломерату шляхом удосконалення способу підготовки шихти |
| title_alt | Improvement of the quality of agglomerate by improving the method of charge preparation |
| title_full | Покращення якості агломерату шляхом удосконалення способу підготовки шихти |
| title_fullStr | Покращення якості агломерату шляхом удосконалення способу підготовки шихти |
| title_full_unstemmed | Покращення якості агломерату шляхом удосконалення способу підготовки шихти |
| title_short | Покращення якості агломерату шляхом удосконалення способу підготовки шихти |
| title_sort | покращення якості агломерату шляхом удосконалення способу підготовки шихти |
| topic | мінералогічний склад зв’язка композит основність олівіни ферити |
| topic_facet | mineralogical composition bundle composite basicity olivines ferrites мінералогічний склад зв’язка композит основність олівіни ферити |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/138 |
| work_keys_str_mv | AT bočkavv improvementofthequalityofagglomeratebyimprovingthemethodofchargepreparation AT sovaav improvementofthequalityofagglomeratebyimprovingthemethodofchargepreparation AT dvoêglazovaav improvementofthequalityofagglomeratebyimprovingthemethodofchargepreparation AT bočkavv pokraŝennââkostíaglomeratušlâhomudoskonalennâsposobupídgotovkišihti AT sovaav pokraŝennââkostíaglomeratušlâhomudoskonalennâsposobupídgotovkišihti AT dvoêglazovaav pokraŝennââkostíaglomeratušlâhomudoskonalennâsposobupídgotovkišihti |