Новий високоефективний енергозберігаючий комплекс газоочисного устаткування для проведення регульованого очищення викидів від машин і агрегатів металургійних виробництв. Повідомлення 2
The design of the gas-cleaning equipment complex is considered, which makes it possible to produce an active non-uniformselective effect on the environment being processed – blast furnace gas from converters and converters, under the conditions of the blast furnace and steelmaking redistribution, to...
Збережено в:
| Дата: | 2023 |
|---|---|
| Автор: | |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2023
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/156 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471961434882048 |
|---|---|
| author | Сєргєєв, С.М. |
| author_facet | Сєргєєв, С.М. |
| author_sort | Сєргєєв, С.М. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-06-19T10:23:27Z |
| description | The design of the gas-cleaning equipment complex is considered, which makes it possible to produce an active non-uniformselective effect on the environment being processed – blast furnace gas from converters and converters, under the conditions of the blast furnace and steelmaking redistribution, to reduce energy consumption (electricity, water) in the process of cleaning emissions and capital costs. The main components of the designed structure of this complex are presented in the form of energy-intensive adjustable tandem wet gas cleaning installations (ERTUMG), formed by identical structural nodes and elements, the gas exhaust paths of which are connected by a collector duct equipped with an automatically controlled shutoff valve. In the collectors of the circulating water supply to the wet gas cleaning apparatus, at the entrances to the scrubber and the Venturi tube unit (ERTUMG), water flow sensors and automated adjustable throttle valves are installed, the drive control of which is connected to the control panel of the metallurgical unit, which provides a direct, direct dependence of the parameters of the gas cleaning operation with the phase of the technological cycle in which the metallurgical unit is located. In the flue gas ducts of the gas exhaust ducts (ERTUMG), flow sensors of the cleaned gas and automatically controlled shutoff valves are installed, the drive control of which is also connected to the control panel of the metallurgical unit, to ensure a direct dependence of the parameters of the gas cleaning operation on the phase of the technological cycle metallurgical unit. The developed complex of gas-cleaning equipment is intended for operation in the conditions of oxygen-converting shops of metallurgical enterprises and takes into account the specifics and modes of operation of the existing process equipment: capacity, performance and technological modes of operation of installed converters. |
| first_indexed | 2026-03-12T15:50:51Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-156 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:50:51Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-1562023-06-19T10:23:27Z New highly efficient energy-saving gas-cleaning equipment for the regulated cleaning of emissions from machines and units of metallurgical production. Report 2 Новий високоефективний енергозберігаючий комплекс газоочисного устаткування для проведення регульованого очищення викидів від машин і агрегатів металургійних виробництв. Повідомлення 2 Сєргєєв, С.М. installation of wet gas cleaning performance energy saving dust and gas emission scrubber exhauster vacuum water flow sensor automated throttle valve shut-off valve установка мокрої газоочистки продуктивність енергозбереження пилогазовий викид скрубер ексгаустер розрідження датчик витрати води автоматизована дросельна засувка запірний клапан The design of the gas-cleaning equipment complex is considered, which makes it possible to produce an active non-uniformselective effect on the environment being processed – blast furnace gas from converters and converters, under the conditions of the blast furnace and steelmaking redistribution, to reduce energy consumption (electricity, water) in the process of cleaning emissions and capital costs. The main components of the designed structure of this complex are presented in the form of energy-intensive adjustable tandem wet gas cleaning installations (ERTUMG), formed by identical structural nodes and elements, the gas exhaust paths of which are connected by a collector duct equipped with an automatically controlled shutoff valve. In the collectors of the circulating water supply to the wet gas cleaning apparatus, at the entrances to the scrubber and the Venturi tube unit (ERTUMG), water flow sensors and automated adjustable throttle valves are installed, the drive control of which is connected to the control panel of the metallurgical unit, which provides a direct, direct dependence of the parameters of the gas cleaning operation with the phase of the technological cycle in which the metallurgical unit is located. In the flue gas ducts of the gas exhaust ducts (ERTUMG), flow sensors of the cleaned gas and automatically controlled shutoff valves are installed, the drive control of which is also connected to the control panel of the metallurgical unit, to ensure a direct dependence of the parameters of the gas cleaning operation on the phase of the technological cycle metallurgical unit. The developed complex of gas-cleaning equipment is intended for operation in the conditions of oxygen-converting shops of metallurgical enterprises and takes into account the specifics and modes of operation of the existing process equipment: capacity, performance and technological modes of operation of installed converters. Розглянуто конструкцію комплексу газоочисного устаткування, що дозволяє в умовах металургійних виробництв справляти активний неоднорідно-вибірковий вплив на оброблюване середовище – технологічні газові викиди, що відводяться від металургійних плавильних агрегатів, для зменшення використання енергоресурсів (електроенергії, води) у процесі очистки технологічних викидів та капітальних витрат. Основні складові вузли розробленої конструкції даного комплексу представлено у вигляді енергоємного регульованого тандему установок мокрої газоочистки (ЕРТУМГ), сформованих тотожними структурними вузлами і елементами, газовідвідні тракти яких з’єднані колекторним газоходом, забезпеченим автоматично регульованим запірним клапаном. В колекторах подачі оборотної води в апарат мокрої газоочистки, на входах в скрубер і блок труб Вентурі (ЕРТУМГ) встановлено датчики витрати води і автоматизовані регульовані дросельні засувки, управління приводом яких пов’язане з пультом управління металургійного агрегату, що забезпечує безпосередній прямозалежний зв’язок параметрів роботи газоочистки з фазою технологічного циклу, в якому знаходиться даний металургійний агрегат. У газоходах очищеного газу газовідвідних трактів (ЕРТУМГ) встановлено датчики витрати очищеного газу і автоматично регульовані запірні клапани, управління приводом яких також пов’язане з пультом управління металургійного агрегату, для забезпечення прямозалежного зв’язку параметрів роботи газоочистки від фази технологічного циклу металургійного агрегату. Розроблений комплекс газоочисного устаткування призначений для експлуатації в умовах киснево-конвертерних цехів металургійних підприємств і враховує специфіку та режими роботи існуючого технологічного обладнання: ємність, продуктивність і технологічні режими роботи встановлених конвертерів. Physico-technological Institute of Metals and Alloys 2023-06-19 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/156 Metal and Casting of Ukraine; Vol. 27 No. 3-4 (2019): Metal and Casting of Ukraine Метал та лиття України ; Том 27 № 3-4 (2019): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/156/157 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | установка мокрої газоочистки продуктивність енергозбереження пилогазовий викид скрубер ексгаустер розрідження датчик витрати води автоматизована дросельна засувка запірний клапан Сєргєєв, С.М. Новий високоефективний енергозберігаючий комплекс газоочисного устаткування для проведення регульованого очищення викидів від машин і агрегатів металургійних виробництв. Повідомлення 2 |
| title | Новий високоефективний енергозберігаючий комплекс газоочисного устаткування для проведення регульованого очищення викидів від машин і агрегатів металургійних виробництв. Повідомлення 2 |
| title_alt | New highly efficient energy-saving gas-cleaning equipment for the regulated cleaning of emissions from machines and units of metallurgical production. Report 2 |
| title_full | Новий високоефективний енергозберігаючий комплекс газоочисного устаткування для проведення регульованого очищення викидів від машин і агрегатів металургійних виробництв. Повідомлення 2 |
| title_fullStr | Новий високоефективний енергозберігаючий комплекс газоочисного устаткування для проведення регульованого очищення викидів від машин і агрегатів металургійних виробництв. Повідомлення 2 |
| title_full_unstemmed | Новий високоефективний енергозберігаючий комплекс газоочисного устаткування для проведення регульованого очищення викидів від машин і агрегатів металургійних виробництв. Повідомлення 2 |
| title_short | Новий високоефективний енергозберігаючий комплекс газоочисного устаткування для проведення регульованого очищення викидів від машин і агрегатів металургійних виробництв. Повідомлення 2 |
| title_sort | новий високоефективний енергозберігаючий комплекс газоочисного устаткування для проведення регульованого очищення викидів від машин і агрегатів металургійних виробництв. повідомлення 2 |
| topic | установка мокрої газоочистки продуктивність енергозбереження пилогазовий викид скрубер ексгаустер розрідження датчик витрати води автоматизована дросельна засувка запірний клапан |
| topic_facet | installation of wet gas cleaning performance energy saving dust and gas emission scrubber exhauster vacuum water flow sensor automated throttle valve shut-off valve установка мокрої газоочистки продуктивність енергозбереження пилогазовий викид скрубер ексгаустер розрідження датчик витрати води автоматизована дросельна засувка запірний клапан |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/156 |
| work_keys_str_mv | AT sêrgêêvsm newhighlyefficientenergysavinggascleaningequipmentfortheregulatedcleaningofemissionsfrommachinesandunitsofmetallurgicalproductionreport2 AT sêrgêêvsm novijvisokoefektivnijenergozberígaûčijkompleksgazoočisnogoustatkuvannâdlâprovedennâregulʹovanogoočiŝennâvikidívvídmašiníagregatívmetalurgíjnihvirobnictvpovídomlennâ2 |