Концепції охолодження виливків за допомогою кріотехнології, нових сипучих матеріалів і способів лиття
Foundry is one of the best examples of resource efficiency, since castings are almost completely available for processing at the end of the operating cycle by re-melting in the production of new ones. In terms of increasing the resource efficiency of production, new casting methods, bulk low-tempera...
Збережено в:
| Дата: | 2023 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2023
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/161 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471962411106304 |
|---|---|
| author | Дорошенко, В.С. Калюжний, П.Б. |
| author_facet | Дорошенко, В.С. Калюжний, П.Б. |
| author_sort | Дорошенко, В.С. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-06-28T05:10:09Z |
| description | Foundry is one of the best examples of resource efficiency, since castings are almost completely available for processing at the end of the operating cycle by re-melting in the production of new ones. In terms of increasing the resource efficiency of production, new casting methods, bulk low-temperature and refractory materials for regulating the cooling of castings are described. The studies were performed under the guidance of prof. O.I. Shinskii in terms of scientific topics of the PTIMA NAS of Ukraine. The regulation processes over a wide range of cooling of a casting in a sandy mold allow both to optimally shorten the cooling time of the casting in the mold, and to influence the formation of the metal structure. In the first case, bases are created to reduce the length of the conveyor branch of the molding and casting lines, on which castings in molds or areas for molds on the casting pad are cooled, as well as for assembling casting rotary conveyor complexes with proportional rotor modules on which molding, pouring and cooling castings operations are performed, bringing them to about the same duration. In the second case, an increase in the rate of crystallization and cooling of the casting has growth limits, the excess of which can lead to a deterioration in the service properties of the metal, in particular, for graphitized cast irons. Therefore, the processes of heat treatment of metals are involved and examples of the mutual complement of the processes of casting and heat treatment of metal are shown. For castings made of iron, casting methods have been proposed in combination with isothermal quenching of castings. The use of solid-gas dispersed media for such quenching (as opposed to traditional liquid) will increase the environmental conditions of production. And the cooling of castings, up to their hardening, using cryotechnology with ice melting, water evaporation and condensation of steam in contact with ice bring the production process closer to nature-like technologies. |
| first_indexed | 2026-03-12T15:50:52Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-161 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:50:52Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-1612023-06-28T05:10:09Z Concepts of cooling castings using cryotechnology, new bulk materials and casting methods Концепції охолодження виливків за допомогою кріотехнології, нових сипучих матеріалів і способів лиття Дорошенко, В.С. Калюжний, П.Б. casting cooling of castings cryotechnology isothermal hardening heat treatment high strength cast iron ice proppant лиття охолодження виливків кріотехнологія ізотермічне гартування термообробка високоміцний чавун лід пропант Foundry is one of the best examples of resource efficiency, since castings are almost completely available for processing at the end of the operating cycle by re-melting in the production of new ones. In terms of increasing the resource efficiency of production, new casting methods, bulk low-temperature and refractory materials for regulating the cooling of castings are described. The studies were performed under the guidance of prof. O.I. Shinskii in terms of scientific topics of the PTIMA NAS of Ukraine. The regulation processes over a wide range of cooling of a casting in a sandy mold allow both to optimally shorten the cooling time of the casting in the mold, and to influence the formation of the metal structure. In the first case, bases are created to reduce the length of the conveyor branch of the molding and casting lines, on which castings in molds or areas for molds on the casting pad are cooled, as well as for assembling casting rotary conveyor complexes with proportional rotor modules on which molding, pouring and cooling castings operations are performed, bringing them to about the same duration. In the second case, an increase in the rate of crystallization and cooling of the casting has growth limits, the excess of which can lead to a deterioration in the service properties of the metal, in particular, for graphitized cast irons. Therefore, the processes of heat treatment of metals are involved and examples of the mutual complement of the processes of casting and heat treatment of metal are shown. For castings made of iron, casting methods have been proposed in combination with isothermal quenching of castings. The use of solid-gas dispersed media for such quenching (as opposed to traditional liquid) will increase the environmental conditions of production. And the cooling of castings, up to their hardening, using cryotechnology with ice melting, water evaporation and condensation of steam in contact with ice bring the production process closer to nature-like technologies. Ливарне виробництво служить одним з кращих прикладів ресурсоефективності, оскільки виливки практично повністю доступні для переробки після закінчення експлуатаційного циклу шляхом переплавки при виробництві нових. З огляду підвищення ресурсоефективності виробництва описано нові способи лиття, сипучі низькотемпературні і вогнетривкі матеріали для регулювання охолодження виливків. Дослідження виконано під керівництвом проф. О.Й. Шинського у ході виконання наукової тематики ФТІМС НАН України. Процеси регулювання в широких межах охолодження виливка в піщаній формі дозволяють як оптимально скорочувати час охолодження виливка у формі, так і впливати на формування структури металу. У першому випадку створюються підстави для зменшення довжини конвеєрної гілки формувальнозаливальних ліній, на якій охолоджують виливки в формах, або площ під форми на заливальному плацу, а також для комплектації ливарних роторно-конвеєрних комплексів пропорційними за величиною роторними модулями, на яких виконують операції формовки, заливки і охолодження виливків, привівши їх до приблизно однакової тривалості. У другому випадку збільшення швидкості кристалізації і охолодження виливка має межі, перевищення яких може призвести до погіршення службових властивостей металу, зокрема, для графітизованих чавунів. Тому залучено процеси термообробки металів і показано приклади взаємного доповнення процесів лиття та термообробки металу. Для виливків з чавуну запропоновано способи лиття в поєднанні з ізотермічним гартуванням виливків. Застосування для такого гартування твердо-газових дисперсних середовищ (на відміну від традиційних рідких) підвищить екологічні умови виробництва. А охолодження виливків, аж до їх гартування, за допомогою кріотехнології з плавленням льоду, випаровуванням води і конденсацією пари в контакті з льодом наближають процес виробництва до природоподібних технологій. Physico-technological Institute of Metals and Alloys 2023-06-28 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/161 Metal and Casting of Ukraine; Vol. 27 No. 5-6 (2019): Metal and Casting of Ukraine Метал та лиття України ; Том 27 № 5-6 (2019): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/161/162 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | лиття охолодження виливків кріотехнологія ізотермічне гартування термообробка високоміцний чавун лід пропант Дорошенко, В.С. Калюжний, П.Б. Концепції охолодження виливків за допомогою кріотехнології, нових сипучих матеріалів і способів лиття |
| title | Концепції охолодження виливків за допомогою кріотехнології, нових сипучих матеріалів і способів лиття |
| title_alt | Concepts of cooling castings using cryotechnology, new bulk materials and casting methods |
| title_full | Концепції охолодження виливків за допомогою кріотехнології, нових сипучих матеріалів і способів лиття |
| title_fullStr | Концепції охолодження виливків за допомогою кріотехнології, нових сипучих матеріалів і способів лиття |
| title_full_unstemmed | Концепції охолодження виливків за допомогою кріотехнології, нових сипучих матеріалів і способів лиття |
| title_short | Концепції охолодження виливків за допомогою кріотехнології, нових сипучих матеріалів і способів лиття |
| title_sort | концепції охолодження виливків за допомогою кріотехнології, нових сипучих матеріалів і способів лиття |
| topic | лиття охолодження виливків кріотехнологія ізотермічне гартування термообробка високоміцний чавун лід пропант |
| topic_facet | casting cooling of castings cryotechnology isothermal hardening heat treatment high strength cast iron ice proppant лиття охолодження виливків кріотехнологія ізотермічне гартування термообробка високоміцний чавун лід пропант |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/161 |
| work_keys_str_mv | AT dorošenkovs conceptsofcoolingcastingsusingcryotechnologynewbulkmaterialsandcastingmethods AT kalûžnijpb conceptsofcoolingcastingsusingcryotechnologynewbulkmaterialsandcastingmethods AT dorošenkovs koncepcííoholodžennâvilivkívzadopomogoûkríotehnologíínovihsipučihmateríalívísposobívlittâ AT kalûžnijpb koncepcííoholodžennâvilivkívzadopomogoûkríotehnologíínovihsipučihmateríalívísposobívlittâ |