Підвищення ефективності системи охолодження валків широкоштабового стана гарячої прокатки (ШСГП) 1680
The cooling system for the working rolls of the finishing group of the stands of the Hot Strip Mill 1680 was examined. It is shown that the temperature of the rolls after rolling the strips is 40–80 °C. Moreover, the maximum temperature values (65–80 °C) are observed in the first three stands of the...
Gespeichert in:
| Datum: | 2023 |
|---|---|
| Hauptverfasser: | , , , |
| Format: | Artikel |
| Sprache: | Ukrainisch |
| Veröffentlicht: |
Physico-technological Institute of Metals and Alloys
2023
|
| Schlagworte: | |
| Online Zugang: | https://www.metalsandcasting.com/index.php/mcu/article/view/171 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Metal and Casting of Ukraine |
Institution
Metal and Casting of Ukraine| _version_ | 1859471967412813824 |
|---|---|
| author | Приходько, І.Ю. Воробей, С.О. Мацко, С.В. Панченко, В.С. |
| author_facet | Приходько, І.Ю. Воробей, С.О. Мацко, С.В. Панченко, В.С. |
| author_sort | Приходько, І.Ю. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-06-29T17:24:37Z |
| description | The cooling system for the working rolls of the finishing group of the stands of the Hot Strip Mill 1680 was examined. It is shown that the temperature of the rolls after rolling the strips is 40–80 °C. Moreover, the maximum temperature values (65–80 °C) are observed in the first three stands of the finishing group. The sizes of the cooling zones for the rolls with water (19–38° for singlerow collectors and 58–90° for two-row ones) and their location along the circumference of the rolls of all stands of the finishing group were determined, as well as the distance from the nozzles to the surface of the rolls (200–350 mm at a nominal 200 mm). The features of the temperature distribution of the upper and lower rolls along the stands of the finishing group and along the length of the roll barrel in relation to the strip rolling modes and the conditions for supplying the cooler to the surface of the rolls are established. It was determined that an increase in the rolling force (per meter of strip width) from 5 to 15 MN/m increases the temperature of the rolls by 20–25 °C. Using mathematical modeling methods, the possibility of reducing the temperature of the rolls due to the modernization of their cooling system was evaluated, in particular: adjusting the angle of the nozzles in the collectors – by 2 °C; replacement of single-row collectors from the entrance to the crate with double-row ones without changing the water flow rate – by 4 °C; increase in water consumption in one stand by 50 m3/h – by 2-4 °C; increase in water pressure by 1 atm. – by 1-3 °С; the use of undermining the surface of the strips before entering the deformation zone with an additional volume of water – by 4 °C. For a little costly increase in the efficiency of cooling the rolls, it was proposed to replace single-row cooling manifolds from the entrance to the stands by double-row in the first three stands, preserving the total water consumption by selecting the type of nozzles. The average decrease in the temperature of the rolls was at least 4 °C. The effectiveness of modernization is confirmed by a decrease in the actual specific consumption of rolls and an increase in the average specific operating time of the roll. |
| first_indexed | 2026-03-12T15:50:56Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-171 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:50:56Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-1712023-06-29T17:24:37Z Improving the efficiency of the roll cooling system of the Hot Strip Mill 1680 Підвищення ефективності системи охолодження валків широкоштабового стана гарячої прокатки (ШСГП) 1680 Приходько, І.Ю. Воробей, С.О. Мацко, С.В. Панченко, В.С. temperature of working rolls strip rolling parameters cooling system modernization температура робочих валків параметри прокатки штаб модернізація системи охолодження The cooling system for the working rolls of the finishing group of the stands of the Hot Strip Mill 1680 was examined. It is shown that the temperature of the rolls after rolling the strips is 40–80 °C. Moreover, the maximum temperature values (65–80 °C) are observed in the first three stands of the finishing group. The sizes of the cooling zones for the rolls with water (19–38° for singlerow collectors and 58–90° for two-row ones) and their location along the circumference of the rolls of all stands of the finishing group were determined, as well as the distance from the nozzles to the surface of the rolls (200–350 mm at a nominal 200 mm). The features of the temperature distribution of the upper and lower rolls along the stands of the finishing group and along the length of the roll barrel in relation to the strip rolling modes and the conditions for supplying the cooler to the surface of the rolls are established. It was determined that an increase in the rolling force (per meter of strip width) from 5 to 15 MN/m increases the temperature of the rolls by 20–25 °C. Using mathematical modeling methods, the possibility of reducing the temperature of the rolls due to the modernization of their cooling system was evaluated, in particular: adjusting the angle of the nozzles in the collectors – by 2 °C; replacement of single-row collectors from the entrance to the crate with double-row ones without changing the water flow rate – by 4 °C; increase in water consumption in one stand by 50 m3/h – by 2-4 °C; increase in water pressure by 1 atm. – by 1-3 °С; the use of undermining the surface of the strips before entering the deformation zone with an additional volume of water – by 4 °C. For a little costly increase in the efficiency of cooling the rolls, it was proposed to replace single-row cooling manifolds from the entrance to the stands by double-row in the first three stands, preserving the total water consumption by selecting the type of nozzles. The average decrease in the temperature of the rolls was at least 4 °C. The effectiveness of modernization is confirmed by a decrease in the actual specific consumption of rolls and an increase in the average specific operating time of the roll. Проведено обстеження системи охолодження робочих валків чистової групи клітей широкоштабового стана гарячої прокатки (ШСГП) 1680. Показано, що температура валків після прокатки штаб становить 40–80 °С. При цьому максимальні значення температури (65–80 °С) спостерігаються в перших трьох клітях чистової групи. Визначено розміри зон охолодження валків водою (19–38° для однорядних колекторів і 58–90° для дворядних) і їх розташування по колу валків всіх клітей чистової групи, а також відстані від форсунок до поверхні валків (200–350 мм при номінальній 200 мм). Встановлено особливості розподілу температур верхніх і нижніх валків по клітям чистової групи і по довжині бочки валків у взаємозв'язку з режимами прокатки штаб і умовами подачі охолоджувача на поверхню валків. Визначено, що збільшення погонної сили прокатки (на метр ширини штаби) від 5 до 15 МН/м підвищує температуру валків на 20–25 °С. Методами математичного моделювання оцінено можливість зниження температури валків за рахунок модернізації системи їх охолодження, зокрема: коригування кутів нахилу форсунок в колекторах – на 2 °С; заміна однорядних колекторів з боку входу в кліть на дворядні без зміни витрати води – на 4 °С; збільшення витрати води в одній кліті на 50 м3/год – на 2-4 °С; збільшення тиску води на 1 атм. – на 1-3 °С; застосування підстужування поверхні штаб перед входом в осередок деформації додатковим обсягом води – на 4 °С. Для маловитратного підвищення ефективності охолодження валків запропоновано в перших трьох клітях замінити однорядні колектори охолодження з боку входу в кліті на дворядні зі збереженням загальної витрати води за рахунок підбору типу форсунок. Експериментальне середнє зниження температури валків склало не менше 4 °С. Ефективність модернізації підтверджена зменшенням фактичної питомої витрати валків і збільшенням середнього питомого напрацювання валка. Physico-technological Institute of Metals and Alloys 2023-06-29 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/171 Metal and Casting of Ukraine; Vol. 27 No. 7-9 (2019): Metal and Casting of Ukraine Метал та лиття України ; Том 27 № 7-9 (2019): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/171/172 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | температура робочих валків параметри прокатки штаб модернізація системи охолодження Приходько, І.Ю. Воробей, С.О. Мацко, С.В. Панченко, В.С. Підвищення ефективності системи охолодження валків широкоштабового стана гарячої прокатки (ШСГП) 1680 |
| title | Підвищення ефективності системи охолодження валків широкоштабового стана гарячої прокатки (ШСГП) 1680 |
| title_alt | Improving the efficiency of the roll cooling system of the Hot Strip Mill 1680 |
| title_full | Підвищення ефективності системи охолодження валків широкоштабового стана гарячої прокатки (ШСГП) 1680 |
| title_fullStr | Підвищення ефективності системи охолодження валків широкоштабового стана гарячої прокатки (ШСГП) 1680 |
| title_full_unstemmed | Підвищення ефективності системи охолодження валків широкоштабового стана гарячої прокатки (ШСГП) 1680 |
| title_short | Підвищення ефективності системи охолодження валків широкоштабового стана гарячої прокатки (ШСГП) 1680 |
| title_sort | підвищення ефективності системи охолодження валків широкоштабового стана гарячої прокатки (шсгп) 1680 |
| topic | температура робочих валків параметри прокатки штаб модернізація системи охолодження |
| topic_facet | temperature of working rolls strip rolling parameters cooling system modernization температура робочих валків параметри прокатки штаб модернізація системи охолодження |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/171 |
| work_keys_str_mv | AT prihodʹkoíû improvingtheefficiencyoftherollcoolingsystemofthehotstripmill1680 AT vorobejso improvingtheefficiencyoftherollcoolingsystemofthehotstripmill1680 AT mackosv improvingtheefficiencyoftherollcoolingsystemofthehotstripmill1680 AT pančenkovs improvingtheefficiencyoftherollcoolingsystemofthehotstripmill1680 AT prihodʹkoíû pídviŝennâefektivnostísistemioholodžennâvalkívširokoštabovogostanagarâčoíprokatkišsgp1680 AT vorobejso pídviŝennâefektivnostísistemioholodžennâvalkívširokoštabovogostanagarâčoíprokatkišsgp1680 AT mackosv pídviŝennâefektivnostísistemioholodžennâvalkívširokoštabovogostanagarâčoíprokatkišsgp1680 AT pančenkovs pídviŝennâefektivnostísistemioholodžennâvalkívširokoštabovogostanagarâčoíprokatkišsgp1680 |