Розвиток ідеології розробки калібровок інструменту для холодної прокатки труб зі сплавів на основі титану
The article is devoted to the issues of calibration and durability of the deforming tool of cold rolling tube mill (CRTM) in the production of titanium alloy pipes. The state and tendencies of methods of construction of calibrations for cold rolling of pipes from alloys based on titanium are analyze...
Gespeichert in:
| Datum: | 2023 |
|---|---|
| 1. Verfasser: | |
| Format: | Artikel |
| Sprache: | Ukrainisch |
| Veröffentlicht: |
Physico-technological Institute of Metals and Alloys
2023
|
| Schlagworte: | |
| Online Zugang: | https://www.metalsandcasting.com/index.php/mcu/article/view/184 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Metal and Casting of Ukraine |
Institution
Metal and Casting of Ukraine| _version_ | 1859471973668618240 |
|---|---|
| author | Міщенко, О.В. |
| author_facet | Міщенко, О.В. |
| author_sort | Міщенко, О.В. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-06-30T09:49:39Z |
| description | The article is devoted to the issues of calibration and durability of the deforming tool of cold rolling tube mill (CRTM) in the production of titanium alloy pipes. The state and tendencies of methods of construction of calibrations for cold rolling of pipes from alloys based on titanium are analyzed. The main types of calibrations, their advantages and disadvantages, as well as the tasks that are set before modern calibrations are considered. Conclusions and recommendations directly related to improving the quality of cold-rolled pipes made of titanium alloys by increasing the accuracy of their dimensions are noted. The data on the influence of the size of the camber on the accuracy of rolled pipes in the CRTM was analyzed. The analysis compared calibrations based on the cross-sectional geometry of the Cassini ellipse and oval. The highlighted advantages of Cassini oval will improve the accuracy of the cross-section of rolled pipes and provide many opportunities for the distribution of crimps in the design of calibrations. This allows the Cassini oval to be recommended for use as a cross-sectional profile of calibres. The relevance of closed solutions in the qualitative analysis of the influence of the planned technological regimes of the cold rolling process of pipes on the choice of the width of the gauges is considered. The investigation of the dependence of the volume of rolled tubes from titanium alloys from wear calibres CRTM was carried out. Dependences of wear resistance of gauge on volumes of rolled pipes from titanium alloys are defined that showed the evident influence of the chemical composition of the material of gauges on their wear resistance during work. The results obtained in the course of the research allowed us to represent a number of important conclusions on the possibility of developing methods for constructing calibrations of working tools of CRTM and to suggest recommendations for improving the wear resistance of calibres during cold rolling of titaniumbased alloy pipes. |
| first_indexed | 2026-03-12T15:51:02Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-184 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:51:02Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-1842023-06-30T09:49:39Z Development of the ideology of calibrations of the tool for cold rolling of pipes from alloys based on titanium Розвиток ідеології розробки калібровок інструменту для холодної прокатки труб зі сплавів на основі титану Міщенко, О.В. pipes titanium alloys cold rolling of pipes calibration of rolling tools Cassini oval wear resitance of calibres труби титан сплави холодна прокатка труб калібрування прокатного інструменту овал Кассіні зносостійкість калібрів The article is devoted to the issues of calibration and durability of the deforming tool of cold rolling tube mill (CRTM) in the production of titanium alloy pipes. The state and tendencies of methods of construction of calibrations for cold rolling of pipes from alloys based on titanium are analyzed. The main types of calibrations, their advantages and disadvantages, as well as the tasks that are set before modern calibrations are considered. Conclusions and recommendations directly related to improving the quality of cold-rolled pipes made of titanium alloys by increasing the accuracy of their dimensions are noted. The data on the influence of the size of the camber on the accuracy of rolled pipes in the CRTM was analyzed. The analysis compared calibrations based on the cross-sectional geometry of the Cassini ellipse and oval. The highlighted advantages of Cassini oval will improve the accuracy of the cross-section of rolled pipes and provide many opportunities for the distribution of crimps in the design of calibrations. This allows the Cassini oval to be recommended for use as a cross-sectional profile of calibres. The relevance of closed solutions in the qualitative analysis of the influence of the planned technological regimes of the cold rolling process of pipes on the choice of the width of the gauges is considered. The investigation of the dependence of the volume of rolled tubes from titanium alloys from wear calibres CRTM was carried out. Dependences of wear resistance of gauge on volumes of rolled pipes from titanium alloys are defined that showed the evident influence of the chemical composition of the material of gauges on their wear resistance during work. The results obtained in the course of the research allowed us to represent a number of important conclusions on the possibility of developing methods for constructing calibrations of working tools of CRTM and to suggest recommendations for improving the wear resistance of calibres during cold rolling of titaniumbased alloy pipes. Статтю присвячено висвітленню питань калібровок і стійкості деформуючого інструменту станів холодної прокатки труб (ХПТ) при виробництві труб з титанових сплавів. Проаналізовано стан і тенденції методів побудови калібровок для холодної прокатки труб зі сплавів на основі титану. Розглянуто основні типи калібровок, їх переваги та недоліки, а також завдання, які ставляться перед сучасними калібровками. Відзначено висновки і рекомендації, які мають пряме відношення до поліпшення якості холоднокатаних труб саме з титанових сплавів шляхом підвищення точності їх розмірів. Розглянуто дані про вплив величини розвалки на точність труб, що прокатуються на станах ХПТ. В ході аналізу було проведено порівняння калібровок, засноване на геометрії поперечного перерізу еліпса і овалу Кассіні. Виділені переваги овалу Кассіні дозволять поліпшити точність поперечного перерізу труб, що прокатуються, і надати широкі можливості по розподілу обтиснень при проектуванні калібровок. Це дозволяє рекомендувати овал Кассіні до використання в якості профілю поперечного перерізу калібрів. Розглянуто актуальність замкнутих рішень при якісному аналізі впливу планованих технологічних режимів процесу холодної прокатки труб на вибір ширини рівчака калібрів. Виконано дослідження залежності обсягів прокатаних труб з титанових сплавів від зносостійкості калібрів станів ХПТ. Визначено залежності зносостійкості калібрів від обсягів прокатаних труб з титанових сплавів, що продемонструвало наочний вплив хімічного складу матеріалу калібрів на їх зносостійкість в ході роботи. Отримані в ході дослідження результати дозволили зробити ряд важливих висновків з можливості розвитку методики побудови калібровок робочого інструмента станів ХПТ і запропонувати рекомендації щодо підвищення зносостійкості калібрів при холодній прокатці труб зі сплавів на основі титану. Physico-technological Institute of Metals and Alloys 2023-06-30 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/184 Metal and Casting of Ukraine; Vol. 27 No. 10-12 (2019): Metal and Casting of Ukraine Метал та лиття України ; Том 27 № 10-12 (2019): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/184/185 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | труби титан сплави холодна прокатка труб калібрування прокатного інструменту овал Кассіні зносостійкість калібрів Міщенко, О.В. Розвиток ідеології розробки калібровок інструменту для холодної прокатки труб зі сплавів на основі титану |
| title | Розвиток ідеології розробки калібровок інструменту для холодної прокатки труб зі сплавів на основі титану |
| title_alt | Development of the ideology of calibrations of the tool for cold rolling of pipes from alloys based on titanium |
| title_full | Розвиток ідеології розробки калібровок інструменту для холодної прокатки труб зі сплавів на основі титану |
| title_fullStr | Розвиток ідеології розробки калібровок інструменту для холодної прокатки труб зі сплавів на основі титану |
| title_full_unstemmed | Розвиток ідеології розробки калібровок інструменту для холодної прокатки труб зі сплавів на основі титану |
| title_short | Розвиток ідеології розробки калібровок інструменту для холодної прокатки труб зі сплавів на основі титану |
| title_sort | розвиток ідеології розробки калібровок інструменту для холодної прокатки труб зі сплавів на основі титану |
| topic | труби титан сплави холодна прокатка труб калібрування прокатного інструменту овал Кассіні зносостійкість калібрів |
| topic_facet | pipes titanium alloys cold rolling of pipes calibration of rolling tools Cassini oval wear resitance of calibres труби титан сплави холодна прокатка труб калібрування прокатного інструменту овал Кассіні зносостійкість калібрів |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/184 |
| work_keys_str_mv | AT míŝenkoov developmentoftheideologyofcalibrationsofthetoolforcoldrollingofpipesfromalloysbasedontitanium AT míŝenkoov rozvitokídeologíírozrobkikalíbrovokínstrumentudlâholodnoíprokatkitrubzísplavívnaosnovítitanu |