Оцінка змін продуктивності і обмежень у форсуванні ходу при збільшенні об’єму доменних печей
The selection of the useful volume of new or reconstructed blast furnaces is an urgent task for both manufacturers and designers; therefore, the assessment of the technological capabilities of furnaces of different volumes has always been of interest from both a practical and a theoretical point of...
Gespeichert in:
| Datum: | 2023 |
|---|---|
| Hauptverfasser: | , |
| Format: | Artikel |
| Sprache: | Ukrainisch |
| Veröffentlicht: |
Physico-technological Institute of Metals and Alloys
2023
|
| Schlagworte: | |
| Online Zugang: | https://www.metalsandcasting.com/index.php/mcu/article/view/215 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Metal and Casting of Ukraine |
Institution
Metal and Casting of Ukraine| _version_ | 1859471983463366656 |
|---|---|
| author | Крячко, Г. Ю. Сігарьов, Є. М. |
| author_facet | Крячко, Г. Ю. Сігарьов, Є. М. |
| author_sort | Крячко, Г. Ю. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-10-06T17:47:18Z |
| description | The selection of the useful volume of new or reconstructed blast furnaces is an urgent task for both manufacturers and designers; therefore, the assessment of the technological capabilities of furnaces of different volumes has always been of interest from both a practical and a theoretical point of view. The purpose of the presented work is the selection of the most representative indicators, with the help of which a comparative assessment of the operation of furnaces of different volumes is possible, the evaluation of the operation of furnaces in the conditions of planned and market economies, as well as an attempt to determine and classify the factors limiting the forced operation of furnaces of increased volume.
It is shown that the use of indicators calculated per unit area furnace is not appropriate, since area furnace is not the main size furnace. The main size is full volume furnace, which determines design unit and amount of capital costs for its construction. Specific productivity indicators calculated per unit volume furnace similarly depend on the height furnace and adequately reflect performance of furnaces of different volumes.
The indisputable advantage of compact blast furnaces with a useful volume < 1500 m3 in comparison with furnaces of larger volumes is shown, which indicates imperfection of a simplified approach to evaluating performance of furnaces based on the concepts of balance and gas dynamic components, since it is difficult to take into account all the components when determining these components influencing factors.
Factors limiting process intensification in blast furnaces of medium and large volumes have been established and classified. The main external factors are the quality characteristics of coke, iron ore materials and blowing, more specifically, hot strength of coke, richness of raw materials in iron and the ability of air blowers to provide blowing with required degree of compression. The main structural solutions to overcome significant limitations in operation of furnaces with a useful volume > 1500 m3 are a rational profile, ratio of output cross-section of air nozzles and cross-section furnace, as well as the use of coneless loading devices. |
| first_indexed | 2026-03-12T15:51:12Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-215 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:51:12Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-2152023-10-06T17:47:18Z Assessment of changes in productivity and limitations in forcing movement when increasing the volume of blast furnaces Оцінка змін продуктивності і обмежень у форсуванні ходу при збільшенні об’єму доменних печей Крячко, Г. Ю. Сігарьов, Є. М. blast furnace volume performance benchmarks limiting factors process intensification доменна піч об’єм продуктивність показники порівняння фактори обмежень інтенсифікація процесу The selection of the useful volume of new or reconstructed blast furnaces is an urgent task for both manufacturers and designers; therefore, the assessment of the technological capabilities of furnaces of different volumes has always been of interest from both a practical and a theoretical point of view. The purpose of the presented work is the selection of the most representative indicators, with the help of which a comparative assessment of the operation of furnaces of different volumes is possible, the evaluation of the operation of furnaces in the conditions of planned and market economies, as well as an attempt to determine and classify the factors limiting the forced operation of furnaces of increased volume. It is shown that the use of indicators calculated per unit area furnace is not appropriate, since area furnace is not the main size furnace. The main size is full volume furnace, which determines design unit and amount of capital costs for its construction. Specific productivity indicators calculated per unit volume furnace similarly depend on the height furnace and adequately reflect performance of furnaces of different volumes. The indisputable advantage of compact blast furnaces with a useful volume < 1500 m3 in comparison with furnaces of larger volumes is shown, which indicates imperfection of a simplified approach to evaluating performance of furnaces based on the concepts of balance and gas dynamic components, since it is difficult to take into account all the components when determining these components influencing factors. Factors limiting process intensification in blast furnaces of medium and large volumes have been established and classified. The main external factors are the quality characteristics of coke, iron ore materials and blowing, more specifically, hot strength of coke, richness of raw materials in iron and the ability of air blowers to provide blowing with required degree of compression. The main structural solutions to overcome significant limitations in operation of furnaces with a useful volume > 1500 m3 are a rational profile, ratio of output cross-section of air nozzles and cross-section furnace, as well as the use of coneless loading devices. Вибір корисного об’єму нових або реконструйованих доменних печей є актуальною задачею як для виробників, так і для проєктувальників, тому оцінка технологічних можливостей печей різного об’єму завжди викликала інтерес як з практичної, так і з теоретичної точок зору. Метою представленої роботи є вибір найбільш представницьких показників, за допомогою яких можлива порівняльна оцінка роботи печей різного об’єму, оцінка роботи печей в умовах планової і ринкової економік, а також спроба визначити та класифікувати фактори обмеження форсованої роботи печей збільшеного об’єму. Показано, що застосування показників, які розраховуються на одиницю площі горна, не є доцільним, оскільки площа горна не є основним розміром печі. Основним розміром є повний об’єм печі, який визначає конструкцію агрегату і обсяг капітальних витрат на його будівництво. Показники питомої продуктивності, що розраховуються на одиницю об’єму печі, аналітично залежать від висоти печі і адекватно відображають результативність роботи печей різного об’єму. Показано беззаперечну перевагу компактних доменних печей з корисним об’ємом < 1500 м3 в порівнянні з печами більших об’ємів, що свідчить про недосконалість спрощеного підходу до оцінки продуктивності печей, заснованому на поняттях балансової і газодинамічної складових, оскільки при визначенні цих складових важко врахувати всі фактори впливу. Встановлено і класифіковано фактори обмеження інтенсифікації процесу в доменних печах середнього і великого об’ємів. Головними зовнішніми факторами є якісні характеристики коксу, залізорудних матеріалів і дуття, більш конкретно, гаряча міцність коксу, багатство сировини залізом і спроможність повітродувних машин забезпечувати дуття потрібних ступенів стиснення. До головних конструкційних факторів подолання суттєвих обмежень в експлуатації печей з корисним об’ємом > 1500 м3 є раціональні профіль, співвідношення площ вихідного перетину повітряних фурм і перетину горна, а також використання безконусних завантажувальних пристроїв. Physico-technological Institute of Metals and Alloys 2023-07-30 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/215 10.15407/steelcast2023.02.008 Metal and Casting of Ukraine; Vol. 31 No. 2 (2023): Metal and Casting of Ukraine Метал та лиття України ; Том 31 № 2 (2023): Метал та лиття України 2706-5529 2077-1304 10.15407/steelcast2023.02 uk https://www.metalsandcasting.com/index.php/mcu/article/view/215/213 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | доменна піч об’єм продуктивність показники порівняння фактори обмежень інтенсифікація процесу Крячко, Г. Ю. Сігарьов, Є. М. Оцінка змін продуктивності і обмежень у форсуванні ходу при збільшенні об’єму доменних печей |
| title | Оцінка змін продуктивності і обмежень у форсуванні ходу при збільшенні об’єму доменних печей |
| title_alt | Assessment of changes in productivity and limitations in forcing movement when increasing the volume of blast furnaces |
| title_full | Оцінка змін продуктивності і обмежень у форсуванні ходу при збільшенні об’єму доменних печей |
| title_fullStr | Оцінка змін продуктивності і обмежень у форсуванні ходу при збільшенні об’єму доменних печей |
| title_full_unstemmed | Оцінка змін продуктивності і обмежень у форсуванні ходу при збільшенні об’єму доменних печей |
| title_short | Оцінка змін продуктивності і обмежень у форсуванні ходу при збільшенні об’єму доменних печей |
| title_sort | оцінка змін продуктивності і обмежень у форсуванні ходу при збільшенні об’єму доменних печей |
| topic | доменна піч об’єм продуктивність показники порівняння фактори обмежень інтенсифікація процесу |
| topic_facet | blast furnace volume performance benchmarks limiting factors process intensification доменна піч об’єм продуктивність показники порівняння фактори обмежень інтенсифікація процесу |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/215 |
| work_keys_str_mv | AT krâčkogû assessmentofchangesinproductivityandlimitationsinforcingmovementwhenincreasingthevolumeofblastfurnaces AT sígarʹovêm assessmentofchangesinproductivityandlimitationsinforcingmovementwhenincreasingthevolumeofblastfurnaces AT krâčkogû ocínkazmínproduktivnostííobmeženʹuforsuvanníhoduprizbílʹšenníobêmudomennihpečej AT sígarʹovêm ocínkazmínproduktivnostííobmeženʹuforsuvanníhoduprizbílʹšenníobêmudomennihpečej |