Деякі особливості розливання сортової заготовки відкритим та закритим струменем
Experimental series of steel casting were carried out to determine the effect of the continuous casting method on the frequency of defects formation in billets. At the same time, the 125x125 mm square billets production was carried out on a six-strand caster with casting speeds of 2.8-4.3 m/min. In...
Збережено в:
| Дата: | 2023 |
|---|---|
| Автори: | , , , , , , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2023
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/218 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471984199467008 |
|---|---|
| author | Смірнов, О. М. Ухін, В. Є. Семірягін, С. В. Семенко, А. Ю. Осипенко, В. В. Смірнов, Ю. О. Скоробагатько, Ю. П. Рябий, Д. В. |
| author_facet | Смірнов, О. М. Ухін, В. Є. Семірягін, С. В. Семенко, А. Ю. Осипенко, В. В. Смірнов, Ю. О. Скоробагатько, Ю. П. Рябий, Д. В. |
| author_sort | Смірнов, О. М. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2023-10-06T17:47:18Z |
| description | Experimental series of steel casting were carried out to determine the effect of the continuous casting method on the frequency of defects formation in billets. At the same time, the 125x125 mm square billets production was carried out on a six-strand caster with casting speeds of 2.8-4.3 m/min. In the process of research, a series of 5 melts of steel 60 (St60) was initially casted with an open stream. After that, using the same molds, 5 melts of steel 40X were sequentially casted with a submerged stream. As a result of an industrial experiment, it was found that because of the open stream continuous casting the number of rhomboidal billets was 4.5 %. In the case of using the submerged stream technology defects in the billet shape were not observed. The use of the "stopper rod” — "tundish nozzle" — "submerged entry nozzle" system allows to control metal consumption during casting more accurate and timelier in automatic mode without changing the billet casting speed. At the same time, the position of the metal level in the mold is constantly ensured, which most accurately considers the features of the billet solid shell formation over the entire mold length at the current casting speed. The absence of the need to control the casting speed by the level of metal in the tundish makes it possible to maintain the optimal amount of melt in it, which stabilizes the casting temperature. The submerged casting prevents bubbling at the phase boundary in the mold and provides the possibility of a significant increase in the nozzle inner diameter (compared to the open stream) that reduces the rate of its clogging with corundum deposits several times. In addition, submerged casting allows the use of special mold powders, which improve the surface quality of the billets. It is possible to additionally improve billets quality using electromagnetic stirring of liquid steel during continuous casting. |
| first_indexed | 2026-03-12T15:51:13Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-218 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:51:13Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-2182023-10-06T17:47:18Z Some specifics of the billet open and submerged stream casting Деякі особливості розливання сортової заготовки відкритим та закритим струменем Смірнов, О. М. Ухін, В. Є. Семірягін, С. В. Семенко, А. Ю. Осипенко, В. В. Смірнов, Ю. О. Скоробагатько, Ю. П. Рябий, Д. В. continuous casting defects in continuously casted billets reoxidation open stream stopper rod submerged entry nozzle electromagnetic stirring безперервне розливання дефекти безперервнолитої сортової заготовки вторинне окиснення відкритий струмінь стопор-моноблок занурений стакан електромагнітне перемішування Experimental series of steel casting were carried out to determine the effect of the continuous casting method on the frequency of defects formation in billets. At the same time, the 125x125 mm square billets production was carried out on a six-strand caster with casting speeds of 2.8-4.3 m/min. In the process of research, a series of 5 melts of steel 60 (St60) was initially casted with an open stream. After that, using the same molds, 5 melts of steel 40X were sequentially casted with a submerged stream. As a result of an industrial experiment, it was found that because of the open stream continuous casting the number of rhomboidal billets was 4.5 %. In the case of using the submerged stream technology defects in the billet shape were not observed. The use of the "stopper rod” — "tundish nozzle" — "submerged entry nozzle" system allows to control metal consumption during casting more accurate and timelier in automatic mode without changing the billet casting speed. At the same time, the position of the metal level in the mold is constantly ensured, which most accurately considers the features of the billet solid shell formation over the entire mold length at the current casting speed. The absence of the need to control the casting speed by the level of metal in the tundish makes it possible to maintain the optimal amount of melt in it, which stabilizes the casting temperature. The submerged casting prevents bubbling at the phase boundary in the mold and provides the possibility of a significant increase in the nozzle inner diameter (compared to the open stream) that reduces the rate of its clogging with corundum deposits several times. In addition, submerged casting allows the use of special mold powders, which improve the surface quality of the billets. It is possible to additionally improve billets quality using electromagnetic stirring of liquid steel during continuous casting. Проведено експериментальні серії розливання сталі для визначення впливу методу безперервного розливання на частоту формування дефектів сортової заготовки. При цьому виробництво квадратних заготовок перетином 125х125 мм здійснювалось на шестиструмковій сортовій машині безперервного лиття заготовок (МБЛЗ) зі швидкостями розливання 2,8-4,3 м/хв. У процесі дослідження спочатку була розлита серія з 5 плавок сталі 60 (Ст60) відкритим струменем. Після цього, з використанням тих же гільз кристалізаторів, послідовно розливали закритим струменем 5 плавок сталі 40Х. Шляхом промислового експерименту було визначено, що в результаті безперервного розливання сталі відкритим струменем кількість ромбічності сортової заготовки становить 4,5 %. Зокрема, у випадку застосування технології розливання металу закритим струменем дефектів геометричної форми заготовок не виявлено. Використання системи «стопор-моноблок» — «стакан-дозатор» — «занурений стакан» дозволяє більш точно й вчасно регулювати витрату металу під час розливання в автоматичному режимі, не змінюючи швидкість витягування заготовки. При цьому забезпечується збереження рівня металевого розплаву в кристалізаторі, що найбільш точно враховує особливості формування скоринки заготовки по всій довжині гільзи при поточній швидкості лиття. Відсутність необхідності регулювання швидкості розливання рівнем металу в промківші дозволяє підтримувати в ньому оптимальну кількість розплаву, що стабілізує температуру розливання. Підведення струменя сталі за допомогою зануреного стакана під рівень металу в кристалізаторі запобігає бурлінню на межі розподілу фаз, а можливість істотного збільшення внутрішнього діаметра стакана-дозатора (у порівнянні з вільним витіканням) у кілька разів знижує швидкість його заростання відкладеннями корунду. Крім цього, розливання закритим струменем дозволяє застосовувати спеціальні шлакоутворюючі суміші, які забезпечують покращення якості поверхні заготовки. Додатково підвищити якість безперервнолитих зливків можливо за рахунок застосування електромагнітного перемішування рідкої сталі. Physico-technological Institute of Metals and Alloys 2023-07-30 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/218 10.15407/steelcast2023.02.034 Metal and Casting of Ukraine; Vol. 31 No. 2 (2023): Metal and Casting of Ukraine Метал та лиття України ; Том 31 № 2 (2023): Метал та лиття України 2706-5529 2077-1304 10.15407/steelcast2023.02 uk https://www.metalsandcasting.com/index.php/mcu/article/view/218/216 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | безперервне розливання дефекти безперервнолитої сортової заготовки вторинне окиснення відкритий струмінь стопор-моноблок занурений стакан електромагнітне перемішування Смірнов, О. М. Ухін, В. Є. Семірягін, С. В. Семенко, А. Ю. Осипенко, В. В. Смірнов, Ю. О. Скоробагатько, Ю. П. Рябий, Д. В. Деякі особливості розливання сортової заготовки відкритим та закритим струменем |
| title | Деякі особливості розливання сортової заготовки відкритим та закритим струменем |
| title_alt | Some specifics of the billet open and submerged stream casting |
| title_full | Деякі особливості розливання сортової заготовки відкритим та закритим струменем |
| title_fullStr | Деякі особливості розливання сортової заготовки відкритим та закритим струменем |
| title_full_unstemmed | Деякі особливості розливання сортової заготовки відкритим та закритим струменем |
| title_short | Деякі особливості розливання сортової заготовки відкритим та закритим струменем |
| title_sort | деякі особливості розливання сортової заготовки відкритим та закритим струменем |
| topic | безперервне розливання дефекти безперервнолитої сортової заготовки вторинне окиснення відкритий струмінь стопор-моноблок занурений стакан електромагнітне перемішування |
| topic_facet | continuous casting defects in continuously casted billets reoxidation open stream stopper rod submerged entry nozzle electromagnetic stirring безперервне розливання дефекти безперервнолитої сортової заготовки вторинне окиснення відкритий струмінь стопор-моноблок занурений стакан електромагнітне перемішування |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/218 |
| work_keys_str_mv | AT smírnovom somespecificsofthebilletopenandsubmergedstreamcasting AT uhínvê somespecificsofthebilletopenandsubmergedstreamcasting AT semírâgínsv somespecificsofthebilletopenandsubmergedstreamcasting AT semenkoaû somespecificsofthebilletopenandsubmergedstreamcasting AT osipenkovv somespecificsofthebilletopenandsubmergedstreamcasting AT smírnovûo somespecificsofthebilletopenandsubmergedstreamcasting AT skorobagatʹkoûp somespecificsofthebilletopenandsubmergedstreamcasting AT râbijdv somespecificsofthebilletopenandsubmergedstreamcasting AT smírnovom deâkíosoblivostírozlivannâsortovoízagotovkivídkritimtazakritimstrumenem AT uhínvê deâkíosoblivostírozlivannâsortovoízagotovkivídkritimtazakritimstrumenem AT semírâgínsv deâkíosoblivostírozlivannâsortovoízagotovkivídkritimtazakritimstrumenem AT semenkoaû deâkíosoblivostírozlivannâsortovoízagotovkivídkritimtazakritimstrumenem AT osipenkovv deâkíosoblivostírozlivannâsortovoízagotovkivídkritimtazakritimstrumenem AT smírnovûo deâkíosoblivostírozlivannâsortovoízagotovkivídkritimtazakritimstrumenem AT skorobagatʹkoûp deâkíosoblivostírozlivannâsortovoízagotovkivídkritimtazakritimstrumenem AT râbijdv deâkíosoblivostírozlivannâsortovoízagotovkivídkritimtazakritimstrumenem |