Параметризація математичної моделі кінетики рекристалізації низьковуглецевої сталі у феритній області в процесі відпалу
An experimental study was performed for the case of recrystallization kinetics of low-carbon steel wire (0.06 % of C) obtained by cold drawing. The influence of the deformation degree and the annealing temperature in the ferrite region on the rate of the primary recrystallization process was studied...
Gespeichert in:
| Datum: | 2024 |
|---|---|
| Hauptverfasser: | , , |
| Format: | Artikel |
| Sprache: | Ukrainisch |
| Veröffentlicht: |
Physico-technological Institute of Metals and Alloys
2024
|
| Schlagworte: | |
| Online Zugang: | https://www.metalsandcasting.com/index.php/mcu/article/view/226 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Metal and Casting of Ukraine |
Institution
Metal and Casting of Ukraine| _version_ | 1859471986718146560 |
|---|---|
| author | Каверинський, В.В. Троцан, А.І. Сухенко, З.П. |
| author_facet | Каверинський, В.В. Троцан, А.І. Сухенко, З.П. |
| author_sort | Каверинський, В.В. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2024-01-05T20:17:59Z |
| description | An experimental study was performed for the case of recrystallization kinetics of low-carbon steel wire (0.06 % of C) obtained by cold drawing. The influence of the deformation degree and the annealing temperature in the ferrite region on the rate of the primary recrystallization process was studied. According to the model, these parameters are the most significant in the case of the same chemical composition. The study allowed us to estimate the parameters values needed for our mathematical model proposed earlier and thus made it applicable for the structural processes description that occurs during recrystallization annealing of ferrite steel at temperatures below A1. Comparison of the results of the updated mathematical model with the obtained experimental data is demonstrated. The analysis of the obtained results showed that at lower annealing temperatures (620–630 °C), the influence of the preliminary deformation degree on the rate of recrystallization is more significant: an increase in deformation accelerates recrystallization. Increasing the annealing temperature significantly accelerates the recrystallization process. At the same time, the degree of the previous deformation acquires much lesser effect. In fact, at annealing temperatures of 690–700 °C, this influence almost disappears for the considered range of deformation degrees (73–84 %). Specific data on the time of primary recrystallization for work-hardened steel of the considered type were also obtained, in particular: at annealing temperatures of 620–630 °C the process of complete primary recrystallization requires 100–120 seconds if a previous cold deformation was 84 % and at least 400 seconds if it was 73 %. At an annealing temperature of 690–700 °C the primary recrystallization of such steel takes about 50–60 seconds. |
| first_indexed | 2026-03-12T15:51:15Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-226 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:51:15Z |
| publishDate | 2024 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-2262024-01-05T20:17:59Z Parameterization of the mathematical model for low-carbon steel recrystallization kinetics in the ferrite region during annealing Параметризація математичної моделі кінетики рекристалізації низьковуглецевої сталі у феритній області в процесі відпалу Каверинський, В.В. Троцан, А.І. Сухенко, З.П. primary recrystallization mathematical model recrystallization kinetics wire cold deformation recrystallization annealing первинна рекристалізація математична модель кінетика рекристалізації дріт холодна деформація рекристалізований відпал An experimental study was performed for the case of recrystallization kinetics of low-carbon steel wire (0.06 % of C) obtained by cold drawing. The influence of the deformation degree and the annealing temperature in the ferrite region on the rate of the primary recrystallization process was studied. According to the model, these parameters are the most significant in the case of the same chemical composition. The study allowed us to estimate the parameters values needed for our mathematical model proposed earlier and thus made it applicable for the structural processes description that occurs during recrystallization annealing of ferrite steel at temperatures below A1. Comparison of the results of the updated mathematical model with the obtained experimental data is demonstrated. The analysis of the obtained results showed that at lower annealing temperatures (620–630 °C), the influence of the preliminary deformation degree on the rate of recrystallization is more significant: an increase in deformation accelerates recrystallization. Increasing the annealing temperature significantly accelerates the recrystallization process. At the same time, the degree of the previous deformation acquires much lesser effect. In fact, at annealing temperatures of 690–700 °C, this influence almost disappears for the considered range of deformation degrees (73–84 %). Specific data on the time of primary recrystallization for work-hardened steel of the considered type were also obtained, in particular: at annealing temperatures of 620–630 °C the process of complete primary recrystallization requires 100–120 seconds if a previous cold deformation was 84 % and at least 400 seconds if it was 73 %. At an annealing temperature of 690–700 °C the primary recrystallization of such steel takes about 50–60 seconds. Виконано експериментальне дослідження кінетики рекристалізації дроту із низьковуглецевої сталі (вміст вуглецю 0,06 %), отриманого шляхом холодного волочіння. Вивчався вплив ступеня деформації та температури відпалу у феритній області на швидкість процесу первинної рекристалізації. Згідно з моделлю ці параметри є найбільш значущими за умови однакового хімічного складу. Дослідження дозволило оцінити значення параметрів математичної моделі, запропонованої нами раніше, і тим самим зробити її застосовною також і для опису структурних процесів, що мають місце у випадку рекристалізаційного відпалу сталі феритного класу при температурах нижче A1. Продемонстровано зіставлення результатів оновленої математичної моделі з отриманими експериментальними даними. Аналіз отриманих результатів показав, що за умови нижчих температур відпалу (620–630 °C) вплив ступеня попередньої деформації на швидкість рекристалізації є більш значним, а саме, збільшення деформації прискорює рекристалізацію. У разі підвищення температури швидкість процесу рекристалізації істотно зростає. При цьому ступінь попередньої деформації починає надавати значно менший вплив. Фактично, при температурах відпалу 690–700 °C цей вплив майже зникає для розглянутого діапазону ступенів деформації (73–84 %). Також отримано конкретні дані про час протікання первинної рекристалізації в холоднодеформованій сталі розглянутого типу, зокрема: при температурах відпалу 620–630 °C процес повної первинної рекристалізації потребує 100–120 секунд за умов попередньої холодної деформації 84 % і не менш 400 секунд, якщо деформація складала 73 %. При температурі відпалу 690–700 °C первинна рекристалізація такої сталі завершується через 50–60 секунд. Physico-technological Institute of Metals and Alloys 2024-01-05 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/226 10.15407/steelcast2023.01.034 Metal and Casting of Ukraine; Vol. 31 No. 1 (2023): Metal and Casting of Ukraine Метал та лиття України ; Том 31 № 1 (2023): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/226/224 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | первинна рекристалізація математична модель кінетика рекристалізації дріт холодна деформація рекристалізований відпал Каверинський, В.В. Троцан, А.І. Сухенко, З.П. Параметризація математичної моделі кінетики рекристалізації низьковуглецевої сталі у феритній області в процесі відпалу |
| title | Параметризація математичної моделі кінетики рекристалізації низьковуглецевої сталі у феритній області в процесі відпалу |
| title_alt | Parameterization of the mathematical model for low-carbon steel recrystallization kinetics in the ferrite region during annealing |
| title_full | Параметризація математичної моделі кінетики рекристалізації низьковуглецевої сталі у феритній області в процесі відпалу |
| title_fullStr | Параметризація математичної моделі кінетики рекристалізації низьковуглецевої сталі у феритній області в процесі відпалу |
| title_full_unstemmed | Параметризація математичної моделі кінетики рекристалізації низьковуглецевої сталі у феритній області в процесі відпалу |
| title_short | Параметризація математичної моделі кінетики рекристалізації низьковуглецевої сталі у феритній області в процесі відпалу |
| title_sort | параметризація математичної моделі кінетики рекристалізації низьковуглецевої сталі у феритній області в процесі відпалу |
| topic | первинна рекристалізація математична модель кінетика рекристалізації дріт холодна деформація рекристалізований відпал |
| topic_facet | primary recrystallization mathematical model recrystallization kinetics wire cold deformation recrystallization annealing первинна рекристалізація математична модель кінетика рекристалізації дріт холодна деформація рекристалізований відпал |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/226 |
| work_keys_str_mv | AT kaverinsʹkijvv parameterizationofthemathematicalmodelforlowcarbonsteelrecrystallizationkineticsintheferriteregionduringannealing AT trocanaí parameterizationofthemathematicalmodelforlowcarbonsteelrecrystallizationkineticsintheferriteregionduringannealing AT suhenkozp parameterizationofthemathematicalmodelforlowcarbonsteelrecrystallizationkineticsintheferriteregionduringannealing AT kaverinsʹkijvv parametrizacíâmatematičnoímodelíkínetikirekristalízacíínizʹkovuglecevoístalíuferitníjoblastívprocesívídpalu AT trocanaí parametrizacíâmatematičnoímodelíkínetikirekristalízacíínizʹkovuglecevoístalíuferitníjoblastívprocesívídpalu AT suhenkozp parametrizacíâmatematičnoímodelíkínetikirekristalízacíínizʹkovuglecevoístalíuferitníjoblastívprocesívídpalu |