Залежність триботехнічних властивостей литого композиційного матеріалу системи [Al — FeCr], отриманого з використанням дисперсно-наповненої газмоделі, від параметрів його мікроструктури
Analysis of scientific and technical published works and sources of patent information made it possible to formulate andset the goal of the performed scientific research work (R&D). By inoculating cast Al-alloy grade AK12 of DSTU 2839:1994with dispersed intermetallic FeCr in the “volume”...
Збережено в:
| Дата: | 2023 |
|---|---|
| Автори: | , , , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2023
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/229 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471987836977152 |
|---|---|
| author | Небожак, І.А. Новицький, В.Г. Дерев’янко, О.В. Каніболоцький, Д.С. Верховлюк, А.М. |
| author_facet | Небожак, І.А. Новицький, В.Г. Дерев’янко, О.В. Каніболоцький, Д.С. Верховлюк, А.М. |
| author_sort | Небожак, І.А. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2024-01-05T20:21:26Z |
| description | Analysis of scientific and technical published works and sources of patent information made it possible to formulate andset the goal of the performed scientific research work (R&D). By inoculating cast Al-alloy grade AK12 of DSTU 2839:1994with dispersed intermetallic FeCr in the “volume” of the casting mold (CM) during casting according to gasifying models,samples of zero-dimensional cast composite material (CCM) of the [Al — FeCr] system were obtained. The application of metallographicanalysis (MGA) showed that the zero-dimensional CCM of the [Al — FeCr] system has an optimal microstructure,and the parameters of its tribostructure (the specific number of inclusions of the σ-phase and its dispersion) not only changealong the height of the cast samples, but also depend on each other. The results of the wearability tests of the material underconditions of friction showed, that the tribotechnical properties (workability of the counter-body material and CCM of the [Al— FeCr] system and the coefficient of sliding friction of the pair “CCM of [Al — FeCr] system — steel 40X” is depending notonly on the height composite casting, as well as from the parameters of its tribostructure. The MGA showed, that after testingthe zero-dimensional CCM of the [Al — FeCr] system and the control casting during wear under conditions of friction, it wasexperimentally proven that the activation of the counter-body material and the coefficient of friction for steam sliding “Al-alloyAK12 — steel 40X” as a result of reinforcement (composite strengthening) of cast Al-alloy grade AK12 with dispersed intermetallicFeCr, on average, increases from 1.15 mg/(cm2·km) and 1.77 to 3.75 mg/(cm2·km) and 1.98, respectively. In contrast,its wear, on average, decreases from 17.85 mg/(cm2·km) to 14.15 mg/(cm2·km). |
| first_indexed | 2026-03-12T15:51:16Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-229 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:51:16Z |
| publishDate | 2023 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-2292024-01-05T20:21:26Z Dependence of the tribotechnical properties of the cast composite material of the [Al — FeCr] system, obtained using a dispersed-filled gas model, on the parameters of its microstructure Залежність триботехнічних властивостей литого композиційного матеріалу системи [Al — FeCr], отриманого з використанням дисперсно-наповненої газмоделі, від параметрів його мікроструктури Небожак, І.А. Новицький, В.Г. Дерев’янко, О.В. Каніболоцький, Д.С. Верховлюк, А.М. Al-matrix FeCr σ-phase reinforcement dispersed inoculator dispersed-filled gas model intermetallic reinforcing phase composite casting composite strengthening Lost-foam casting (LFC-process) Al-alloy of AK12 grade CCM of [Al — FeCr] system metallographic analysis parameters of microstructure tribotechnical properties Al-матриця FeCr σ-фаза армування дисперсний інокулятор дисперсно-наповнена газмодель інтерметалідна армуюча фаза композитний виливок композиційне зміцнення ЛГМ-процес ливарний Al-сплав марки АК12 ЛКМ системи [Al — FeCr] металографічний аналіз параметри мікроструктури триботехнічні властивості Analysis of scientific and technical published works and sources of patent information made it possible to formulate andset the goal of the performed scientific research work (R&D). By inoculating cast Al-alloy grade AK12 of DSTU 2839:1994with dispersed intermetallic FeCr in the “volume” of the casting mold (CM) during casting according to gasifying models,samples of zero-dimensional cast composite material (CCM) of the [Al — FeCr] system were obtained. The application of metallographicanalysis (MGA) showed that the zero-dimensional CCM of the [Al — FeCr] system has an optimal microstructure,and the parameters of its tribostructure (the specific number of inclusions of the σ-phase and its dispersion) not only changealong the height of the cast samples, but also depend on each other. The results of the wearability tests of the material underconditions of friction showed, that the tribotechnical properties (workability of the counter-body material and CCM of the [Al— FeCr] system and the coefficient of sliding friction of the pair “CCM of [Al — FeCr] system — steel 40X” is depending notonly on the height composite casting, as well as from the parameters of its tribostructure. The MGA showed, that after testingthe zero-dimensional CCM of the [Al — FeCr] system and the control casting during wear under conditions of friction, it wasexperimentally proven that the activation of the counter-body material and the coefficient of friction for steam sliding “Al-alloyAK12 — steel 40X” as a result of reinforcement (composite strengthening) of cast Al-alloy grade AK12 with dispersed intermetallicFeCr, on average, increases from 1.15 mg/(cm2·km) and 1.77 to 3.75 mg/(cm2·km) and 1.98, respectively. In contrast,its wear, on average, decreases from 17.85 mg/(cm2·km) to 14.15 mg/(cm2·km). Проведено аналіз вітчизняної та зарубіжної науково-технічної й патентної літератури, а також сформульовано йпоставлено мету цієї науково-дослідної роботи (НДР). Шляхом інокулювання ливарного Al-сплаву марки АК12ДСТУ 2839:1994 дисперсним інтерметалідом FeCr у «порожнині» ливарної форми (ЛФ) при литті за моделями,що газифікуються, одержали зразки нульмірного литого композиційного матеріалу (ЛКМ) системи [Al — FeCr].За допомогою металографічного аналізу (МГА) вдалося довести, що параметри його мікроструктури (питомакількість включень σ-фази та її дисперсність) не лише змінюються по висоті литих зразків, але й залежать одинвід одного. Результати випробувань досліджуваного матеріалу на зношування в умовах сухого тертя показали,що триботехнічні властивості {спрацювання матеріалу контртіла (МКТ), зношування ЛКМ системи [Al — FeCr] йкоефіцієнт тертя ковзання пари «ЛКМ системи [Al — FeCr] — сталь 40Х»} залежать як від висоти композитноговиливка, так і параметрів його мікроструктури. Із застосуванням МГА та внаслідок випробувань в умовах сухоготертя було експериментально доведено, що спрацювання МКТ та коефіцієнт тертя ковзання пари «Al-сплав АК12— сталь 40Х» внаслідок армування (композиційного зміцнення) ливарного Al-сплаву марки АК12 дисперсним ін-терметалідом FeCr, у середньому, збільшується від 1,15 мг/(см2·км) та 1,77 до 3,75 мг/(см2·км) та 1,98, відповід-но. Натомість його зношування, у середньому, зменшується від 17,85 мг/(см2·км) до 14,15 мг/(см2·км). Physico-technological Institute of Metals and Alloys 2023-12-25 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/229 10.15407/steelcast2023.03.008 Metal and Casting of Ukraine; Vol. 31 No. 3 (2023): Metal and Casting of Ukraine Метал та лиття України ; Том 31 № 3 (2023): Метал та лиття України 2706-5529 2077-1304 10.15407/steelcast2023.03 uk https://www.metalsandcasting.com/index.php/mcu/article/view/229/227 Авторське право (c) 2023 Метал та лиття України |
| spellingShingle | Al-матриця FeCr σ-фаза армування дисперсний інокулятор дисперсно-наповнена газмодель інтерметалідна армуюча фаза композитний виливок композиційне зміцнення ЛГМ-процес ливарний Al-сплав марки АК12 ЛКМ системи [Al — FeCr] металографічний аналіз параметри мікроструктури триботехнічні властивості Небожак, І.А. Новицький, В.Г. Дерев’янко, О.В. Каніболоцький, Д.С. Верховлюк, А.М. Залежність триботехнічних властивостей литого композиційного матеріалу системи [Al — FeCr], отриманого з використанням дисперсно-наповненої газмоделі, від параметрів його мікроструктури |
| title | Залежність триботехнічних властивостей литого композиційного матеріалу системи [Al — FeCr], отриманого з використанням дисперсно-наповненої газмоделі, від параметрів його мікроструктури |
| title_alt | Dependence of the tribotechnical properties of the cast composite material of the [Al — FeCr] system, obtained using a dispersed-filled gas model, on the parameters of its microstructure |
| title_full | Залежність триботехнічних властивостей литого композиційного матеріалу системи [Al — FeCr], отриманого з використанням дисперсно-наповненої газмоделі, від параметрів його мікроструктури |
| title_fullStr | Залежність триботехнічних властивостей литого композиційного матеріалу системи [Al — FeCr], отриманого з використанням дисперсно-наповненої газмоделі, від параметрів його мікроструктури |
| title_full_unstemmed | Залежність триботехнічних властивостей литого композиційного матеріалу системи [Al — FeCr], отриманого з використанням дисперсно-наповненої газмоделі, від параметрів його мікроструктури |
| title_short | Залежність триботехнічних властивостей литого композиційного матеріалу системи [Al — FeCr], отриманого з використанням дисперсно-наповненої газмоделі, від параметрів його мікроструктури |
| title_sort | залежність триботехнічних властивостей литого композиційного матеріалу системи [al — fecr], отриманого з використанням дисперсно-наповненої газмоделі, від параметрів його мікроструктури |
| topic | Al-матриця FeCr σ-фаза армування дисперсний інокулятор дисперсно-наповнена газмодель інтерметалідна армуюча фаза композитний виливок композиційне зміцнення ЛГМ-процес ливарний Al-сплав марки АК12 ЛКМ системи [Al — FeCr] металографічний аналіз параметри мікроструктури триботехнічні властивості |
| topic_facet | Al-matrix FeCr σ-phase reinforcement dispersed inoculator dispersed-filled gas model intermetallic reinforcing phase composite casting composite strengthening Lost-foam casting (LFC-process) Al-alloy of AK12 grade CCM of [Al — FeCr] system metallographic analysis parameters of microstructure tribotechnical properties Al-матриця FeCr σ-фаза армування дисперсний інокулятор дисперсно-наповнена газмодель інтерметалідна армуюча фаза композитний виливок композиційне зміцнення ЛГМ-процес ливарний Al-сплав марки АК12 ЛКМ системи [Al — FeCr] металографічний аналіз параметри мікроструктури триботехнічні властивості |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/229 |
| work_keys_str_mv | AT nebožakía dependenceofthetribotechnicalpropertiesofthecastcompositematerialofthealfecrsystemobtainedusingadispersedfilledgasmodelontheparametersofitsmicrostructure AT novicʹkijvg dependenceofthetribotechnicalpropertiesofthecastcompositematerialofthealfecrsystemobtainedusingadispersedfilledgasmodelontheparametersofitsmicrostructure AT derevânkoov dependenceofthetribotechnicalpropertiesofthecastcompositematerialofthealfecrsystemobtainedusingadispersedfilledgasmodelontheparametersofitsmicrostructure AT kaníbolocʹkijds dependenceofthetribotechnicalpropertiesofthecastcompositematerialofthealfecrsystemobtainedusingadispersedfilledgasmodelontheparametersofitsmicrostructure AT verhovlûkam dependenceofthetribotechnicalpropertiesofthecastcompositematerialofthealfecrsystemobtainedusingadispersedfilledgasmodelontheparametersofitsmicrostructure AT nebožakía zaležnístʹtribotehníčnihvlastivostejlitogokompozicíjnogomateríalusistemialfecrotrimanogozvikoristannâmdispersnonapovnenoígazmodelívídparametrívjogomíkrostrukturi AT novicʹkijvg zaležnístʹtribotehníčnihvlastivostejlitogokompozicíjnogomateríalusistemialfecrotrimanogozvikoristannâmdispersnonapovnenoígazmodelívídparametrívjogomíkrostrukturi AT derevânkoov zaležnístʹtribotehníčnihvlastivostejlitogokompozicíjnogomateríalusistemialfecrotrimanogozvikoristannâmdispersnonapovnenoígazmodelívídparametrívjogomíkrostrukturi AT kaníbolocʹkijds zaležnístʹtribotehníčnihvlastivostejlitogokompozicíjnogomateríalusistemialfecrotrimanogozvikoristannâmdispersnonapovnenoígazmodelívídparametrívjogomíkrostrukturi AT verhovlûkam zaležnístʹtribotehníčnihvlastivostejlitogokompozicíjnogomateríalusistemialfecrotrimanogozvikoristannâmdispersnonapovnenoígazmodelívídparametrívjogomíkrostrukturi |