Модернізація агломераційної фабрики ПрАТ «КАМЕТ-СТАЛЬ»: організаційні, технологічні, екологічні та техніко-економічні аспекти
A short-term industrial project of modernization of the agglomeration factory of PJSC “KAMET-STEEL” (Ukraine, Kamianske) is proposed. The implementation of the project is carried out in three directions — improvement of agglomerate sintering technology, overhaul of agglomeration machine No. 7 and im...
Збережено в:
| Дата: | 2024 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2024
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/241 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471989859680256 |
|---|---|
| author | Воденнікова, О.С. Воденніков, С.А. Бондаренко, Я.В. |
| author_facet | Воденнікова, О.С. Воденніков, С.А. Бондаренко, Я.В. |
| author_sort | Воденнікова, О.С. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2024-03-24T18:39:49Z |
| description | A short-term industrial project of modernization of the agglomeration factory of PJSC “KAMET-STEEL” (Ukraine, Kamianske) is proposed. The implementation of the project is carried out in three directions — improvement of agglomerate sintering technology, overhaul of agglomeration machine No. 7 and improvement of the gas purification process of process gases and aspiration of the main dust removal units. The implementation of the project involves the following stages: engineering works; supply of equipment and production of technological metal structures; construction and assembly works and putting the modernized agglomeration machine into operation. For the capital repair of agglomeration machine No. 7, it is proposed to carry out: repair of the longitudinal and transverse seals of the agglomeration machine; repair of the gas collector, vacuum chambers, dust bags, compensators in the sintering zone, vacuum chambers in the cooling zone; restoration of thermal insulation on the gas collector, vacuum chambers, dust bags. For the purification of process gases at the sintering plant of PJSC “KAMET-STEEL” it is proposed to: replace the exhauster; installation of a new gas treatment; improvement of aspiration systems; dismantling of quenching and return cooling drums. An opportunity is shown by improving the process of gas purification of process gases and aspiration of the main dust removal units, to achieve a dust content of no more than 30 mg/m3, a CO content — of up to 6500 mg/m3, an SOx content — of no more than 500 mg/m3, and to reduce the overall dustiness at the sintering plant by 20 %. The technical and economic substantiation of the feasibility of modernization of the agglomeration factory of PJSC “KAMET-STEEL” is given. It has been established that the introduction of agglomerate sintering technology due to the use of energy-saving measures will lead to a 1.08 % decrease in the cost of 1 ton of agglomerate, which in turn will affect the decrease in the cost of 1 ton of cast iron. |
| first_indexed | 2026-03-12T15:51:18Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-241 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:51:18Z |
| publishDate | 2024 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-2412024-03-24T18:39:49Z Modernization of the agglomeration factory of PJSC “KAMET-STEEL”: organizational, technological, environmental and technical and economic aspects Модернізація агломераційної фабрики ПрАТ «КАМЕТ-СТАЛЬ»: організаційні, технологічні, екологічні та техніко-економічні аспекти Воденнікова, О.С. Воденніков, С.А. Бондаренко, Я.В. Production modernization ecological modernization agglomeration production agglomeration machine project project implementation модернізація виробництва екологічна модернізація агломераційне виробництво агломераційна машина проєкт реалізація проєкту A short-term industrial project of modernization of the agglomeration factory of PJSC “KAMET-STEEL” (Ukraine, Kamianske) is proposed. The implementation of the project is carried out in three directions — improvement of agglomerate sintering technology, overhaul of agglomeration machine No. 7 and improvement of the gas purification process of process gases and aspiration of the main dust removal units. The implementation of the project involves the following stages: engineering works; supply of equipment and production of technological metal structures; construction and assembly works and putting the modernized agglomeration machine into operation. For the capital repair of agglomeration machine No. 7, it is proposed to carry out: repair of the longitudinal and transverse seals of the agglomeration machine; repair of the gas collector, vacuum chambers, dust bags, compensators in the sintering zone, vacuum chambers in the cooling zone; restoration of thermal insulation on the gas collector, vacuum chambers, dust bags. For the purification of process gases at the sintering plant of PJSC “KAMET-STEEL” it is proposed to: replace the exhauster; installation of a new gas treatment; improvement of aspiration systems; dismantling of quenching and return cooling drums. An opportunity is shown by improving the process of gas purification of process gases and aspiration of the main dust removal units, to achieve a dust content of no more than 30 mg/m3, a CO content — of up to 6500 mg/m3, an SOx content — of no more than 500 mg/m3, and to reduce the overall dustiness at the sintering plant by 20 %. The technical and economic substantiation of the feasibility of modernization of the agglomeration factory of PJSC “KAMET-STEEL” is given. It has been established that the introduction of agglomerate sintering technology due to the use of energy-saving measures will lead to a 1.08 % decrease in the cost of 1 ton of agglomerate, which in turn will affect the decrease in the cost of 1 ton of cast iron. Запропоновано короткостроковий промисловий проєкт модернізації агломераційної фабрики ПрАТ «КАМЕТ-СТАЛЬ» (Україна, м. Кам’янське). Реалізація проєкту здійснюється в трьох напрямах —удосконалення технології спікання агломерату, капітальний ремонт агломераційної машини № 7 та удосконалення процесу газоочищення технологічних газів та аспірації основних вузлів пиловидалення. Виконання проєкту передбачає наступні етапи: інжинірингові роботи; постачання устаткування та виготовлення технологічних металоконструкцій; будівельно-монтажні роботи та введення модернізованої агломераційної машини в експлуатацію. Для капітального ремонту агломераційної машини № 7 пропонується виконати: ремонт поздовжніх та поперечних ущільнень агломераційної машини; ремонт газового колектора, вакуум-камер, пилових мішків, компенсаторів в зоні спікання, вакуум-камер в зоні охолодження; відновлення термічної ізоляції на газовому колекторі, вакуум-камерах, пилових мішках. Для очищення технологічних газів на агломераційній фабриці ПрАТ «КАМЕТ-СТАЛЬ» пропонується: заміна ексгаустера; установка нового газоочищення; удосконалення аспіраційних систем; демонтаж барабанів гасіння і охолодження обороту. Показано можливість шляхом удосконалення процесу газоочищення технологічних газів та аспірації основних вузлів пиловидалення досягти вмісту пилу на викиді в атмосферу не більше 30 мг/м3, вмісту СО — до 6500 мг/м3, вмісту SOx — не більше 500 мг/м3 та знизити загальну запиленість на агломераційній фабриці на 20 %. Наведено техніко-економічне обґрунтування доцільності модернізації агломераційної фабрики ПрАТ «КАМЕТ-СТАЛЬ». Встановлено, що впровадження технології спікання агломерату за рахунок використання енергозберігаючих заходів призведе до зниження на 1,08 % собівартості 1 тонни агломерату, що в свою чергу вплине на зниження собівартості 1 тонни чавуну. Physico-technological Institute of Metals and Alloys 2024-03-08 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/241 10.15407/steelcast2023.04.01 Metal and Casting of Ukraine; Vol. 31 No. 4 (2023): Metal and Casting of Ukraine Метал та лиття України ; Том 31 № 4 (2023): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/241/240 Авторське право (c) 2024 Метал та лиття України |
| spellingShingle | модернізація виробництва екологічна модернізація агломераційне виробництво агломераційна машина проєкт реалізація проєкту Воденнікова, О.С. Воденніков, С.А. Бондаренко, Я.В. Модернізація агломераційної фабрики ПрАТ «КАМЕТ-СТАЛЬ»: організаційні, технологічні, екологічні та техніко-економічні аспекти |
| title | Модернізація агломераційної фабрики ПрАТ «КАМЕТ-СТАЛЬ»: організаційні, технологічні, екологічні та техніко-економічні аспекти |
| title_alt | Modernization of the agglomeration factory of PJSC “KAMET-STEEL”: organizational, technological, environmental and technical and economic aspects |
| title_full | Модернізація агломераційної фабрики ПрАТ «КАМЕТ-СТАЛЬ»: організаційні, технологічні, екологічні та техніко-економічні аспекти |
| title_fullStr | Модернізація агломераційної фабрики ПрАТ «КАМЕТ-СТАЛЬ»: організаційні, технологічні, екологічні та техніко-економічні аспекти |
| title_full_unstemmed | Модернізація агломераційної фабрики ПрАТ «КАМЕТ-СТАЛЬ»: організаційні, технологічні, екологічні та техніко-економічні аспекти |
| title_short | Модернізація агломераційної фабрики ПрАТ «КАМЕТ-СТАЛЬ»: організаційні, технологічні, екологічні та техніко-економічні аспекти |
| title_sort | модернізація агломераційної фабрики прат «камет-сталь»: організаційні, технологічні, екологічні та техніко-економічні аспекти |
| topic | модернізація виробництва екологічна модернізація агломераційне виробництво агломераційна машина проєкт реалізація проєкту |
| topic_facet | Production modernization ecological modernization agglomeration production agglomeration machine project project implementation модернізація виробництва екологічна модернізація агломераційне виробництво агломераційна машина проєкт реалізація проєкту |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/241 |
| work_keys_str_mv | AT vodenníkovaos modernizationoftheagglomerationfactoryofpjsckametsteelorganizationaltechnologicalenvironmentalandtechnicalandeconomicaspects AT vodenníkovsa modernizationoftheagglomerationfactoryofpjsckametsteelorganizationaltechnologicalenvironmentalandtechnicalandeconomicaspects AT bondarenkoâv modernizationoftheagglomerationfactoryofpjsckametsteelorganizationaltechnologicalenvironmentalandtechnicalandeconomicaspects AT vodenníkovaos modernízacíâaglomeracíjnoífabrikipratkametstalʹorganízacíjnítehnologíčníekologíčnítatehníkoekonomíčníaspekti AT vodenníkovsa modernízacíâaglomeracíjnoífabrikipratkametstalʹorganízacíjnítehnologíčníekologíčnítatehníkoekonomíčníaspekti AT bondarenkoâv modernízacíâaglomeracíjnoífabrikipratkametstalʹorganízacíjnítehnologíčníekologíčnítatehníkoekonomíčníaspekti |