Технології лиття та приготування алюмінієвих сплавів за допомогою засобів магнітної гідродинаміки
This article presents some developments of the Physico-technological Institute of Metals and Alloys of the National Academy of Sciences of Ukraine related to the technologies of aluminum alloys, which have been successfully tested in laboratory and production facilities. Applied magnetohydrodynamics...
Збережено в:
| Дата: | 2024 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2024
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/256 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471991881334784 |
|---|---|
| author | Фікссен, В.М. Карпухін, Є.О. |
| author_facet | Фікссен, В.М. Карпухін, Є.О. |
| author_sort | Фікссен, В.М. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2025-05-30T17:01:04Z |
| description | This article presents some developments of the Physico-technological Institute of Metals and Alloys of the National Academy of Sciences of Ukraine related to the technologies of aluminum alloys, which have been successfully tested in laboratory and production facilities.
Applied magnetohydrodynamics in metallurgy and foundry manufacturing has technological opportunities that are either unattainable or difficult to implement when other physical principles are used. Progress in this area has been slow due to the fact that large non-magnetic gaps are inevitable in metallurgical devices used in metallurgy and foundry. However, due to the improvement of refractory and electro-technical materials, the use of magnetohydrodynamics in metallurgical production of the world is constantly increasing. The following technological developments are described.
Casting under electromagnetic pressure according to the low-pressure casting scheme, in which the pressure of the compressed gas is replaced by electromagnetic influence. As a result, there is no need to seal the crucible with liquid metal and the accuracy of the preset filling mode of the mold is increased.
Casting under electromagnetic pressure with a dispersed gating and feeding system. With this casting method, a high liquid metal utilization rate is achieved, which is unachievable in other casting methods, and the absence of shrinkage defects is ensured.
Electromagnetic stirrer for pulsating effect on liquid metal, which is an alternative to the electromagnetic mixer of traveling magnetic field.
Complex refining of aluminum alloys, including filtration of the melt through a ceramic foam filter and its simultaneous purging with argon. Increased efficiency is achieved by application of electromagnetic factors. |
| first_indexed | 2026-03-12T15:51:20Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-256 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:51:20Z |
| publishDate | 2024 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-2562025-05-30T17:01:04Z Technologies of casting and preparation of aluminum alloys using magnetohydrodynamics tools Технології лиття та приготування алюмінієвих сплавів за допомогою засобів магнітної гідродинаміки Фікссен, В.М. Карпухін, Є.О. aluminum alloys casting electromagnetic pressure electromagnetic stirrer non-metallic inclusions refining electromagnetic factors ceramic foam filter filtration Алюмінієві сплави лиття електромагнітний тиск електромагнітний перемішувач неметалеві включення рафінування електромагнітні фактори пінокерамічний фільтр фільтрування This article presents some developments of the Physico-technological Institute of Metals and Alloys of the National Academy of Sciences of Ukraine related to the technologies of aluminum alloys, which have been successfully tested in laboratory and production facilities. Applied magnetohydrodynamics in metallurgy and foundry manufacturing has technological opportunities that are either unattainable or difficult to implement when other physical principles are used. Progress in this area has been slow due to the fact that large non-magnetic gaps are inevitable in metallurgical devices used in metallurgy and foundry. However, due to the improvement of refractory and electro-technical materials, the use of magnetohydrodynamics in metallurgical production of the world is constantly increasing. The following technological developments are described. Casting under electromagnetic pressure according to the low-pressure casting scheme, in which the pressure of the compressed gas is replaced by electromagnetic influence. As a result, there is no need to seal the crucible with liquid metal and the accuracy of the preset filling mode of the mold is increased. Casting under electromagnetic pressure with a dispersed gating and feeding system. With this casting method, a high liquid metal utilization rate is achieved, which is unachievable in other casting methods, and the absence of shrinkage defects is ensured. Electromagnetic stirrer for pulsating effect on liquid metal, which is an alternative to the electromagnetic mixer of traveling magnetic field. Complex refining of aluminum alloys, including filtration of the melt through a ceramic foam filter and its simultaneous purging with argon. Increased efficiency is achieved by application of electromagnetic factors. У статті представлено деякі розробки Фізико-технологічного інституту металів та сплавів Національної академії наук України, пов'язані з технологіями алюмінієвих сплавів, які успішно пройшли випробування в лабораторних та виробничих умовах. Прикладна магнітна гідродинаміка в металургії та ливарному виробництві має технологічні потенціали, які або недосяжні, або важко реалізуються при використанні інших фізичних принципів. Прогрес у цій галузі був повільним у зв'язку з тим, що в металургійних пристроях, що використовуються в металургії та ливарному виробництві, неминучі великі немагнітні зазори. Однак у зв'язку з удосконаленням вогнетривких і електротехнічних матеріалів використання магнітної гідродинаміки в металургійному виробництві світу постійно зростає. Описані наступні технологічні розробки. Електромагнітне лиття під тиском за схемою лиття під низьким тиском, при якій тиск стисненого газу замінюється електромагнітною дією. В результаті відпадає необхідність герметизації тигля рідким металом, і підвищується точність заданого режиму заповнення форми. Електромагнітне лиття під тиском з розосередженою ливниково-живлючої системою. При такому способі лиття досягається високий коефіцієнт використання рідкого металу, що недосяжно при інших способах лиття, і забезпечує відсутність усадочних дефектів. Електромагнітний перемішувач для пульсуючого впливу на рідкий метал, який є альтернативою електромагнітному перемішувачу магнітного поля, що біжить. Комплексне рафінування алюмінієвих сплавів, що включає фільтрування розплаву через пінокерамічний фільтр і його продування аргоном. Підвищений коефіцієнт корисної дії (ККД) досягається застосуванням електромагнітних факторів. Physico-technological Institute of Metals and Alloys 2024-07-14 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/256 10.15407/steelcast2024.01.002 Metal and Casting of Ukraine; Vol. 32 No. 1 (2024): Metal and Casting of Ukraine Метал та лиття України ; Том 32 № 1 (2024): Метал та лиття України 2706-5529 2077-1304 10.15407/steelcast2024.01 uk https://www.metalsandcasting.com/index.php/mcu/article/view/256/255 Авторське право (c) 2024 Метал та лиття України |
| spellingShingle | Алюмінієві сплави лиття електромагнітний тиск електромагнітний перемішувач неметалеві включення рафінування електромагнітні фактори пінокерамічний фільтр фільтрування Фікссен, В.М. Карпухін, Є.О. Технології лиття та приготування алюмінієвих сплавів за допомогою засобів магнітної гідродинаміки |
| title | Технології лиття та приготування алюмінієвих сплавів за допомогою засобів магнітної гідродинаміки |
| title_alt | Technologies of casting and preparation of aluminum alloys using magnetohydrodynamics tools |
| title_full | Технології лиття та приготування алюмінієвих сплавів за допомогою засобів магнітної гідродинаміки |
| title_fullStr | Технології лиття та приготування алюмінієвих сплавів за допомогою засобів магнітної гідродинаміки |
| title_full_unstemmed | Технології лиття та приготування алюмінієвих сплавів за допомогою засобів магнітної гідродинаміки |
| title_short | Технології лиття та приготування алюмінієвих сплавів за допомогою засобів магнітної гідродинаміки |
| title_sort | технології лиття та приготування алюмінієвих сплавів за допомогою засобів магнітної гідродинаміки |
| topic | Алюмінієві сплави лиття електромагнітний тиск електромагнітний перемішувач неметалеві включення рафінування електромагнітні фактори пінокерамічний фільтр фільтрування |
| topic_facet | aluminum alloys casting electromagnetic pressure electromagnetic stirrer non-metallic inclusions refining electromagnetic factors ceramic foam filter filtration Алюмінієві сплави лиття електромагнітний тиск електромагнітний перемішувач неметалеві включення рафінування електромагнітні фактори пінокерамічний фільтр фільтрування |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/256 |
| work_keys_str_mv | AT fíkssenvm technologiesofcastingandpreparationofaluminumalloysusingmagnetohydrodynamicstools AT karpuhínêo technologiesofcastingandpreparationofaluminumalloysusingmagnetohydrodynamicstools AT fíkssenvm tehnologíílittâtaprigotuvannâalûmíníêvihsplavívzadopomogoûzasobívmagnítnoígídrodinamíki AT karpuhínêo tehnologíílittâtaprigotuvannâalûmíníêvihsplavívzadopomogoûzasobívmagnítnoígídrodinamíki |