Виробничий шум на автоматизованій формувальній лінії ливарного цеху
The purpose of the work is to determine the nature of the noise generated during the operation of manual pneumatic rammers, an automated molding line and knockout grids in the foundry shop based on determining the levels of acoustic noise parameters in the mold manufacturing area and ways to reduce...
Збережено в:
| Дата: | 2024 |
|---|---|
| Автори: | , , , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2024
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/263 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471992938299392 |
|---|---|
| author | Солоненко, Л.І. Реп’ях, С.І. Усенко, Р.В. Погребський, О.І. Чумаченко, В.Б. |
| author_facet | Солоненко, Л.І. Реп’ях, С.І. Усенко, Р.В. Погребський, О.І. Чумаченко, В.Б. |
| author_sort | Солоненко, Л.І. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2025-06-04T06:57:48Z |
| description | The purpose of the work is to determine the nature of the noise generated during the operation of manual pneumatic rammers, an automated molding line and knockout grids in the foundry shop based on determining the levels of acoustic noise parameters in the mold manufacturing area and ways to reduce their level.
To determine the noise parameters, a mode noise spectrum analyzer SL-5868F was used with subsequent digitization of the data obtained on the analyzer. Measurements of noise parameters were carried out at the site for the production of foundry molds with manual pneumatic rammers and an automatic molding line, as well as at the site for knocking out castings on knockout grids.
It has been established that the noise generated in the areas of molding and knocking out molds, regardless of the molding method (manual, automatic) and the model of the knockout grid used, is broadband, and there is no homogeneity in the sound field of the generated noise, which is due to the generation of noise from sources characterized by differences in acoustic power levels and the nature of the noise spectrum. The noise from equipment or a technological operation with a shock nature is not constant and has a maximum sound power level in the region of medium and high frequencies generated by the equipment under study.
It is possible to reduce the noise level in the foundry shop analyzed in the work by implementing a set of measures to modernize the molding and knocking out equipment or introducing into production an alternative method of manufacturing and knocking out foundry molds, in which, if it is possible to produce castings of a given nomenclature in the required volume with the required level of quality, the above mentioned are excluded and other sources of noise generation of unacceptable levels. |
| first_indexed | 2026-03-12T15:51:21Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-263 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:51:21Z |
| publishDate | 2024 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-2632025-06-04T06:57:48Z Production noise on an automated molding line in a foundry Виробничий шум на автоматизованій формувальній лінії ливарного цеху Солоненко, Л.І. Реп’ях, С.І. Усенко, Р.В. Погребський, О.І. Чумаченко, В.Б. Noise frequency sound pressure knockout grid foundry molding line man шум частота звуковий тиск вибивна решітка ливарний цех формувальна лінія людина The purpose of the work is to determine the nature of the noise generated during the operation of manual pneumatic rammers, an automated molding line and knockout grids in the foundry shop based on determining the levels of acoustic noise parameters in the mold manufacturing area and ways to reduce their level. To determine the noise parameters, a mode noise spectrum analyzer SL-5868F was used with subsequent digitization of the data obtained on the analyzer. Measurements of noise parameters were carried out at the site for the production of foundry molds with manual pneumatic rammers and an automatic molding line, as well as at the site for knocking out castings on knockout grids. It has been established that the noise generated in the areas of molding and knocking out molds, regardless of the molding method (manual, automatic) and the model of the knockout grid used, is broadband, and there is no homogeneity in the sound field of the generated noise, which is due to the generation of noise from sources characterized by differences in acoustic power levels and the nature of the noise spectrum. The noise from equipment or a technological operation with a shock nature is not constant and has a maximum sound power level in the region of medium and high frequencies generated by the equipment under study. It is possible to reduce the noise level in the foundry shop analyzed in the work by implementing a set of measures to modernize the molding and knocking out equipment or introducing into production an alternative method of manufacturing and knocking out foundry molds, in which, if it is possible to produce castings of a given nomenclature in the required volume with the required level of quality, the above mentioned are excluded and other sources of noise generation of unacceptable levels. Мета роботи — на основі визначення рівнів акустичних параметрів шуму на ділянці виготовлення ливарних форм при роботі ручних пневматичних трамбівок, автоматизованій формувальній лінії та вибивних решіток у ливарному цеху визначити характер шумів, що при цьому генерується, та шляхи зниження їх рівня. Для визначення параметрів шумів використовували аналізатор спектру шуму мод. SL-5868F з послідуючою відцифровкою отриманих на аналізаторі даних. Виміри параметрів шумів проводили на ділянці виготовлення ливарних форм з ручними пневматичними трамбівками та на автоматичній формувальній лінії, а також на ділянці вибивання виливків на вибивних решітках. Встановлено, що шум, створюваний на ділянках формування і вибивання ливарних форм, незалежно від способу формування (ручне, автоматичне) та моделі використаної вибивної решітки є широкосмуговим, а у звуковому полі генерованого шуму відсутня однорідність, що зумовлено генерацією шумів від джерел, які характеризуються різницею рівнів акустичної потужності та характером шумового спектру. Шум від обладнання або технологічної операції з ударним характером не є постійним і має максимум за рівнем звукової потужності в області середніх і високих частот, що генеруються досліджуваним обладнанням. Зменшити рівень шуму в аналізованому в роботі ливарному цеху можна шляхом виконання комплексу заходів щодо модернізації формувального та вибивного обладнання або впровадження у виробництво альтернативного способу виготовлення та вибивання ливарних форм, в яких при можливості виробництва лиття даної номенклатури в необхідному обсязі з необхідним рівнем якості виключені зазначені вище та інші джерела генерації шуму неприпустимого рівня. Physico-technological Institute of Metals and Alloys 2024-07-24 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/263 10.15407/steelcast2024.02.007 Metal and Casting of Ukraine; Vol. 32 No. 2 (2024): Metal and Casting of Ukraine Метал та лиття України ; Том 32 № 2 (2024): Метал та лиття України 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/263/262 Авторське право (c) 2024 Метал та лиття України |
| spellingShingle | шум частота звуковий тиск вибивна решітка ливарний цех формувальна лінія людина Солоненко, Л.І. Реп’ях, С.І. Усенко, Р.В. Погребський, О.І. Чумаченко, В.Б. Виробничий шум на автоматизованій формувальній лінії ливарного цеху |
| title | Виробничий шум на автоматизованій формувальній лінії ливарного цеху |
| title_alt | Production noise on an automated molding line in a foundry |
| title_full | Виробничий шум на автоматизованій формувальній лінії ливарного цеху |
| title_fullStr | Виробничий шум на автоматизованій формувальній лінії ливарного цеху |
| title_full_unstemmed | Виробничий шум на автоматизованій формувальній лінії ливарного цеху |
| title_short | Виробничий шум на автоматизованій формувальній лінії ливарного цеху |
| title_sort | виробничий шум на автоматизованій формувальній лінії ливарного цеху |
| topic | шум частота звуковий тиск вибивна решітка ливарний цех формувальна лінія людина |
| topic_facet | Noise frequency sound pressure knockout grid foundry molding line man шум частота звуковий тиск вибивна решітка ливарний цех формувальна лінія людина |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/263 |
| work_keys_str_mv | AT solonenkolí productionnoiseonanautomatedmoldinglineinafoundry AT repâhsí productionnoiseonanautomatedmoldinglineinafoundry AT usenkorv productionnoiseonanautomatedmoldinglineinafoundry AT pogrebsʹkijoí productionnoiseonanautomatedmoldinglineinafoundry AT čumačenkovb productionnoiseonanautomatedmoldinglineinafoundry AT solonenkolí virobničijšumnaavtomatizovaníjformuvalʹníjlíníílivarnogocehu AT repâhsí virobničijšumnaavtomatizovaníjformuvalʹníjlíníílivarnogocehu AT usenkorv virobničijšumnaavtomatizovaníjformuvalʹníjlíníílivarnogocehu AT pogrebsʹkijoí virobničijšumnaavtomatizovaníjformuvalʹníjlíníílivarnogocehu AT čumačenkovb virobničijšumnaavtomatizovaníjformuvalʹníjlíníílivarnogocehu |