Нестаціонарні перехідні режими роботи доменних печей в пусковий період після будівництва або реконструкції
The purpose of the presented work is to determine tasks and characteristic features of three periods transition of blast furnaces (BF) from start-up to stationary mode of the smelting, namely blowing, blowing and development of the furnace capacity. It is shown that task of the blowing period is the...
Збережено в:
| Дата: | 2024 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2024
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/274 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471996534915072 |
|---|---|
| author | Крячко , Геннадій Юрійович Сігарьов , Євген Миколайович |
| author_facet | Крячко , Геннадій Юрійович Сігарьов , Євген Миколайович |
| author_sort | Крячко , Геннадій Юрійович |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2025-06-04T07:05:42Z |
| description | The purpose of the presented work is to determine tasks and characteristic features of three periods transition of blast furnaces (BF) from start-up to stationary mode of the smelting, namely blowing, blowing and development of the furnace capacity. It is shown that task of the blowing period is the formation of primary zone of the cohesion and establishment of five-zone column structure of the charge inherent in the stationary mode of blast furnace melting. The task of adjacent blowing and development of the furnace power periods is to achieve the working level of gas blowing parameters – flow rate and blowing temperature together with increased pressure of gases in working space of the furnace. It is shown that completion of the blowing and beginning of the blowing periods is a forced reduction blowing flow rate as a result of the formation of a cohesion zone in column of charge and an increase in its resistance. Visually, the boundary of these periods is characterized by breaks in the curves of changes in furnace gas temperatures and CO and CO2 content over time – the temperature increases after break, and gas content stabilizes at certain levels. It was established that the recommendation to increase the blowing flow in the blowing period at a rate of 30–35 m3/h is not universal, as it does not take into account the dimensions of the blast furnace. It is shown that at the initial relative flow in the inflation period of 1.0 Vd / Vcor . min with an inflation rate of 35 m3/h, the duration of the blowing period of the 1033 m3 BF will be 1.2 days, and the 5000 m3 BF will last 6 days. That is, another well-known recommendation regarding the same duration of the inflation period of 5–6 days needs correction. The modern practice of construction and reconstruction of blast furnaces is aimed at the use of a ceramic glass in the furnace and bottom, therefore, based on the experience of far abroad, the duration of the blowing period can be shortened due to the period of melting of cast iron.Furnaces of large volume require an extended period of power development, in which the condition for each subsequent increase in gas pressure parameters is to maintain stability temperature regime of lining of the furnace, sump and bottom. |
| first_indexed | 2026-03-12T15:51:24Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-274 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:51:24Z |
| publishDate | 2024 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-2742025-06-04T07:05:42Z Unstationary transient modes operation of blast furnaces in the start-up period after construction or reconstruction Нестаціонарні перехідні режими роботи доменних печей в пусковий період після будівництва або реконструкції Крячко , Геннадій Юрійович Сігарьов , Євген Миколайович blast furnace blowing development of power duration inflating inflation rate transition modes доменна піч задувальний освоєння потужності перехідні режими роздувальний темп роздування тривалість The purpose of the presented work is to determine tasks and characteristic features of three periods transition of blast furnaces (BF) from start-up to stationary mode of the smelting, namely blowing, blowing and development of the furnace capacity. It is shown that task of the blowing period is the formation of primary zone of the cohesion and establishment of five-zone column structure of the charge inherent in the stationary mode of blast furnace melting. The task of adjacent blowing and development of the furnace power periods is to achieve the working level of gas blowing parameters – flow rate and blowing temperature together with increased pressure of gases in working space of the furnace. It is shown that completion of the blowing and beginning of the blowing periods is a forced reduction blowing flow rate as a result of the formation of a cohesion zone in column of charge and an increase in its resistance. Visually, the boundary of these periods is characterized by breaks in the curves of changes in furnace gas temperatures and CO and CO2 content over time – the temperature increases after break, and gas content stabilizes at certain levels. It was established that the recommendation to increase the blowing flow in the blowing period at a rate of 30–35 m3/h is not universal, as it does not take into account the dimensions of the blast furnace. It is shown that at the initial relative flow in the inflation period of 1.0 Vd / Vcor . min with an inflation rate of 35 m3/h, the duration of the blowing period of the 1033 m3 BF will be 1.2 days, and the 5000 m3 BF will last 6 days. That is, another well-known recommendation regarding the same duration of the inflation period of 5–6 days needs correction. The modern practice of construction and reconstruction of blast furnaces is aimed at the use of a ceramic glass in the furnace and bottom, therefore, based on the experience of far abroad, the duration of the blowing period can be shortened due to the period of melting of cast iron.Furnaces of large volume require an extended period of power development, in which the condition for each subsequent increase in gas pressure parameters is to maintain stability temperature regime of lining of the furnace, sump and bottom. Метою представленої роботи є визначення задач і характерних ознак трьох періодів переходу доменних печей (ДП) від пуску до стаціонарного режиму ведення плавки, а саме задувального, роздувального і освоєння потужності печі. Показано, що задачею задувального періоду є утворення первинної зони когезії і встановлення п’ятизонної структури стовпа шихти, притаманної стаціонарному режиму доменної плавки. Задачею суміжних роздувального і освоєння потужності печі періодів є досягнення робочого рівня газодуттьових параметрів — витрати і температури дуття разом з підвищеним тиском газів в робочому просторі печі. Показано, що завершенням задувального і початком роздувального періодів є вимушене зменшення витрати дуття в результаті утворення зони когезії в стовпі шихти і зростання його опору. Візуально межею вказаних періодів є характерні перелами на кривих зміни в часі температур колошникового газу і вмісту СО і СО2 в ньому — температура після переламу зростає, а вміст газів стабілізується на певних рівнях. Встановлено, що рекомендація нарощувати витрату дуття в роздувальному періоді зі швидкістю 30—35 м3/год не є універсальною, оскільки не враховує розміри доменної печі. Показано, що при початковій відносній витраті в роздувальному періоді в 1,0 Vд / Vкор . хв з темпом роздування 35 м3/год тривалість задувального періоду ДП 1033 м3 становитиме 1,2 доби, а ДП 5000 м3 — 6 діб. Тобто ще одна відома рекомендація стосовно однакової тривалості роздувального періоду в 5—6 діб потребує коректив. Сучасна практика будівництва і реконструкції доменних печей спрямована на застосування керамічного стакану в горні і лещаді, тому спираючись на досвід дальнього зарубіжжя, тривалість роздувального періоду може бути скорочена за рахунок періоду виплавки ливарного чавуну. Печі великого об’єму потребують подовженого періоду освоєння потужності, при якому умовою кожного наступного підвищення газодуттьових параметрів є збереження стабільності температурного режиму футерівки горна, зумпфу і лещаді. Physico-technological Institute of Metals and Alloys 2024-12-24 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/274 10.15407/steelcast2024.03-04.001 Metal and Casting of Ukraine; Vol. 32 No. 3-4 (2024): Metal and Casting of Ukraine; 8-16 Метал та лиття України ; Том 32 № 3-4 (2024): Метал та лиття України; 8-16 2706-5529 2077-1304 10.15407/steelcast2024.03-04 uk https://www.metalsandcasting.com/index.php/mcu/article/view/274/271 Авторське право (c) 2025 Метал та лиття України |
| spellingShingle | доменна піч задувальний освоєння потужності перехідні режими роздувальний темп роздування тривалість Крячко , Геннадій Юрійович Сігарьов , Євген Миколайович Нестаціонарні перехідні режими роботи доменних печей в пусковий період після будівництва або реконструкції |
| title | Нестаціонарні перехідні режими роботи доменних печей в пусковий період після будівництва або реконструкції |
| title_alt | Unstationary transient modes operation of blast furnaces in the start-up period after construction or reconstruction |
| title_full | Нестаціонарні перехідні режими роботи доменних печей в пусковий період після будівництва або реконструкції |
| title_fullStr | Нестаціонарні перехідні режими роботи доменних печей в пусковий період після будівництва або реконструкції |
| title_full_unstemmed | Нестаціонарні перехідні режими роботи доменних печей в пусковий період після будівництва або реконструкції |
| title_short | Нестаціонарні перехідні режими роботи доменних печей в пусковий період після будівництва або реконструкції |
| title_sort | нестаціонарні перехідні режими роботи доменних печей в пусковий період після будівництва або реконструкції |
| topic | доменна піч задувальний освоєння потужності перехідні режими роздувальний темп роздування тривалість |
| topic_facet | blast furnace blowing development of power duration inflating inflation rate transition modes доменна піч задувальний освоєння потужності перехідні режими роздувальний темп роздування тривалість |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/274 |
| work_keys_str_mv | AT krâčkogennadíjûríjovič unstationarytransientmodesoperationofblastfurnacesinthestartupperiodafterconstructionorreconstruction AT sígarʹovêvgenmikolajovič unstationarytransientmodesoperationofblastfurnacesinthestartupperiodafterconstructionorreconstruction AT krâčkogennadíjûríjovič nestacíonarníperehídnírežimirobotidomennihpečejvpuskovijperíodpíslâbudívnictvaaborekonstrukcíí AT sígarʹovêvgenmikolajovič nestacíonarníperehídnírežimirobotidomennihpečejvpuskovijperíodpíslâbudívnictvaaborekonstrukcíí |