Комплексна система відсікання конвертерного шлаку з використанням розроблених функціональних виробів ТОВ «ГІР-Інжиніринг»
One of the most essential tasks that must be solved in a modern BOF shop is to reduce the amount of final slag that enters the ladle during the tapping. According to estimates from various researchers and practical experience, the amount of slag entering the ladle during the tapping is distributed a...
Збережено в:
| Дата: | 2024 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2024
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/278 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471997300375552 |
|---|---|
| author | Смірнов, О.М. Камкіна , Л.В. Шарандін , К.М. Рябий, Д.В. |
| author_facet | Смірнов, О.М. Камкіна , Л.В. Шарандін , К.М. Рябий, Д.В. |
| author_sort | Смірнов, О.М. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2025-06-04T07:05:42Z |
| description | One of the most essential tasks that must be solved in a modern BOF shop is to reduce the amount of final slag that enters the ladle during the tapping.
According to estimates from various researchers and practical experience, the amount of slag entering the ladle during the tapping is distributed as follows: up to 25% - at the beginning, up to 60% - at the end of the tapping and up to 15% - when the converter returns to its working position.
Today, there are two basic schemes for cutting off converter slag: automatic («active») and «passive». The primary automatic schemes include a «gas-dynamic» сut-off system and a «slide gate» type system. An affordable and effective alternative is the scheme of a “passive” primary and secondary BOF slag cut-off system using functional refractory devices.
The industrial facilities of GIR-Engineering LLC and PTIMA NAS of Ukraine have developed a "passive" scheme for the complex BOF slag cut-off system. It includes two systems: a primary cut-off with a plastic «tampon» type stopper and a secondary cut-off with the refractory «ball» / «dart» type stopper. Both systems work with manual applicators, which minimizes the capital costs of introducing them into the production chain.
During 2021-2024 years, at the PrJSC "KametStal" plant (Kamianske, Ukraine) (BOF with a capacity of 250 tons – 2 units.), successful industrial tests of the developed complex BOF slag cut-off system were carried out.
The total economic effect from implementation was ≈ 1.2 USD per ton of steel. |
| first_indexed | 2026-03-12T15:51:25Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-278 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:51:25Z |
| publishDate | 2024 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-2782025-06-04T07:05:42Z Complex BOF Slag Cut-Off System Using Developed Functional Devices Produced by GIR-Engineering LLC Комплексна система відсікання конвертерного шлаку з використанням розроблених функціональних виробів ТОВ «ГІР-Інжиніринг» Смірнов, О.М. Камкіна , Л.В. Шарандін , К.М. Рябий, Д.В. BOF slag primary cut-off system secondary cut-off system stopper applicator конвертер шлак первинне відсікання вторинне відсікання стопор аплікатор One of the most essential tasks that must be solved in a modern BOF shop is to reduce the amount of final slag that enters the ladle during the tapping. According to estimates from various researchers and practical experience, the amount of slag entering the ladle during the tapping is distributed as follows: up to 25% - at the beginning, up to 60% - at the end of the tapping and up to 15% - when the converter returns to its working position. Today, there are two basic schemes for cutting off converter slag: automatic («active») and «passive». The primary automatic schemes include a «gas-dynamic» сut-off system and a «slide gate» type system. An affordable and effective alternative is the scheme of a “passive” primary and secondary BOF slag cut-off system using functional refractory devices. The industrial facilities of GIR-Engineering LLC and PTIMA NAS of Ukraine have developed a "passive" scheme for the complex BOF slag cut-off system. It includes two systems: a primary cut-off with a plastic «tampon» type stopper and a secondary cut-off with the refractory «ball» / «dart» type stopper. Both systems work with manual applicators, which minimizes the capital costs of introducing them into the production chain. During 2021-2024 years, at the PrJSC "KametStal" plant (Kamianske, Ukraine) (BOF with a capacity of 250 tons – 2 units.), successful industrial tests of the developed complex BOF slag cut-off system were carried out. The total economic effect from implementation was ≈ 1.2 USD per ton of steel. Одним серед найважливіших завдань, які потребують вирішення в умовах сучасного конвертерного цеху, є скорочення кількості кінцевого технологічного шлаку, що потрапляє до сталерозливного ковша при випуску плавки з агрегату. За оцінками різних дослідників і практичного досвіду, кількість шлаку, яка потрапляє в ківш при випуску сталі з конвертора, розподіляється наступним чином (без використання технології / пристроїв відсікання шлаку): до 25% – на початку випуску плавки, до 60% – в кінці випуску плавки і до 15% – при поверненні конвертора до робочого положення. Нині існують дві принципові схеми відсікання конвертерного шлаку: автоматична (активна) та «пасивна». До основних автоматичних схем відноситься газодинамічна система відсікання та система типу «шиберний затвор». Доступною й ефективною альтернативою є схема «пасивного» відсічення первинного та вторинного конвертерного шлаку з використанням функціональних вогнетривких виробів. На промисловому майданчику компанії ТОВ «ГІР-Інжінірінг», спільно з ФТІМС НАН України, розроблено «пасивну» схему комплексного відсічення конвертерного шлаку. Вона містить дві системи: первинне відсікання пластичним стопором типу «тампон» і вторинне відсікання вогнетривким стопором типу «куля» / «дротик». Обидві системи працюють із ручними аплікаторами, що мінімізує капітальні витрати на їх упровадження у виробничий ланцюг. У період 2021–2024 рр. в умовах комбінату ПрАТ «КаметСталь» (конвертера ємністю 250 тн – 2 шт.) проведено успішні промислові випробування розробленої комплексної системи відсічення конвертерного шлаку. Сумарний економічний ефект від впровадження становив ≈ 1,2 USD/т сталі. Physico-technological Institute of Metals and Alloys 2024-12-24 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/278 10.15407/steelcast2024.03-04.002 Metal and Casting of Ukraine; Vol. 32 No. 3-4 (2024): Metal and Casting of Ukraine; 17-24 Метал та лиття України ; Том 32 № 3-4 (2024): Метал та лиття України; 17-24 2706-5529 2077-1304 10.15407/steelcast2024.03-04 uk https://www.metalsandcasting.com/index.php/mcu/article/view/278/269 Авторське право (c) 2025 Метал та лиття України |
| spellingShingle | конвертер шлак первинне відсікання вторинне відсікання стопор аплікатор Смірнов, О.М. Камкіна , Л.В. Шарандін , К.М. Рябий, Д.В. Комплексна система відсікання конвертерного шлаку з використанням розроблених функціональних виробів ТОВ «ГІР-Інжиніринг» |
| title | Комплексна система відсікання конвертерного шлаку з використанням розроблених функціональних виробів ТОВ «ГІР-Інжиніринг» |
| title_alt | Complex BOF Slag Cut-Off System Using Developed Functional Devices Produced by GIR-Engineering LLC |
| title_full | Комплексна система відсікання конвертерного шлаку з використанням розроблених функціональних виробів ТОВ «ГІР-Інжиніринг» |
| title_fullStr | Комплексна система відсікання конвертерного шлаку з використанням розроблених функціональних виробів ТОВ «ГІР-Інжиніринг» |
| title_full_unstemmed | Комплексна система відсікання конвертерного шлаку з використанням розроблених функціональних виробів ТОВ «ГІР-Інжиніринг» |
| title_short | Комплексна система відсікання конвертерного шлаку з використанням розроблених функціональних виробів ТОВ «ГІР-Інжиніринг» |
| title_sort | комплексна система відсікання конвертерного шлаку з використанням розроблених функціональних виробів тов «гір-інжиніринг» |
| topic | конвертер шлак первинне відсікання вторинне відсікання стопор аплікатор |
| topic_facet | BOF slag primary cut-off system secondary cut-off system stopper applicator конвертер шлак первинне відсікання вторинне відсікання стопор аплікатор |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/278 |
| work_keys_str_mv | AT smírnovom complexbofslagcutoffsystemusingdevelopedfunctionaldevicesproducedbygirengineeringllc AT kamkínalv complexbofslagcutoffsystemusingdevelopedfunctionaldevicesproducedbygirengineeringllc AT šarandínkm complexbofslagcutoffsystemusingdevelopedfunctionaldevicesproducedbygirengineeringllc AT râbijdv complexbofslagcutoffsystemusingdevelopedfunctionaldevicesproducedbygirengineeringllc AT smírnovom kompleksnasistemavídsíkannâkonverternogošlakuzvikoristannâmrozroblenihfunkcíonalʹnihvirobívtovgírínžiníring AT kamkínalv kompleksnasistemavídsíkannâkonverternogošlakuzvikoristannâmrozroblenihfunkcíonalʹnihvirobívtovgírínžiníring AT šarandínkm kompleksnasistemavídsíkannâkonverternogošlakuzvikoristannâmrozroblenihfunkcíonalʹnihvirobívtovgírínžiníring AT râbijdv kompleksnasistemavídsíkannâkonverternogošlakuzvikoristannâmrozroblenihfunkcíonalʹnihvirobívtovgírínžiníring |