Залежність стану металевої ванни від кількості застосовуваного феромарганцю на установці ківш-піч
Steel production involves the use of various ferroalloys, which are introduced in significant quantities into the liquid metal bath, including at the stage of extra-furnace treatment. The vast majority of ferroalloys (additives) are fed in lump form. The volume of the additive can vary from 0.05 to...
Збережено в:
| Дата: | 2025 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | Українська |
| Опубліковано: |
Physico-technological Institute of Metals and Alloys
2025
|
| Теми: | |
| Онлайн доступ: | https://www.metalsandcasting.com/index.php/mcu/article/view/283 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Metal and Casting of Ukraine |
Репозитарії
Metal and Casting of Ukraine| _version_ | 1859471999627165696 |
|---|---|
| author | Піптюк, В.П. Самохвалов, С.Є. Логозинський, І.М. Греков, С.В. |
| author_facet | Піптюк, В.П. Самохвалов, С.Є. Логозинський, І.М. Греков, С.В. |
| author_sort | Піптюк, В.П. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2025-06-13T12:49:48Z |
| description | Steel production involves the use of various ferroalloys, which are introduced in significant quantities into the liquid metal bath, including at the stage of extra-furnace treatment. The vast majority of ferroalloys (additives) are fed in lump form. The volume of the additive can vary from 0.05 to several tens of kilograms per ton of molten steel, depending on the technological conditions of production and other requirements. Until now, research and calculations on the efficiency of using such additives in steel production were based on the consideration of the behavior of their individual piece in the liquid metal bath. At the same time, the theoretical description of the hydrodynamic and thermal state of the metal bath did not take into account the effect of the amount of the additive introduced. At the same time, it is this factor that can affect the accuracy of the calculated results and increase the error of further assessment of the efficiency of using valuable ferroalloys, which can be imported in significant quantities. The article shows the feasibility of taking into account such a factor as the amount of solid additives in the study of melting (dissolution) processes and assimilation of solid additives by the metal melt, which turns out to be significant among a number of influential parameters in real complex physical and chemical processes of their use.
Using the example of lump ferromanganese grade FeMn78 as an additive, which was introduced in different quantities (from 1 to 3 kg/t) into the bath of a ladle with a capacity of 60 tons during steel processing in a ladle-furnace unit (LFU) with simultaneous bottom blowing with argon within 50-200 l/min through a tuyere, the effect of the amount of additive on the change in the hydrodynamic and thermal state of the liquid metal bath is shown. |
| first_indexed | 2026-03-12T15:51:27Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-283 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:51:27Z |
| publishDate | 2025 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-2832025-06-13T12:49:48Z Dependence of the State of the Metal Bath on the Amount of Ferromanganese Used in the Ladle-Furnace Unit Залежність стану металевої ванни від кількості застосовуваного феромарганцю на установці ківш-піч Піптюк, В.П. Самохвалов, С.Є. Логозинський, І.М. Греков, С.В. Amount of ferroalloy hydrodynamics thermal state liquid metal bath кількість феросплаву гідродинаміка тепловий стан рідка металева ванна Steel production involves the use of various ferroalloys, which are introduced in significant quantities into the liquid metal bath, including at the stage of extra-furnace treatment. The vast majority of ferroalloys (additives) are fed in lump form. The volume of the additive can vary from 0.05 to several tens of kilograms per ton of molten steel, depending on the technological conditions of production and other requirements. Until now, research and calculations on the efficiency of using such additives in steel production were based on the consideration of the behavior of their individual piece in the liquid metal bath. At the same time, the theoretical description of the hydrodynamic and thermal state of the metal bath did not take into account the effect of the amount of the additive introduced. At the same time, it is this factor that can affect the accuracy of the calculated results and increase the error of further assessment of the efficiency of using valuable ferroalloys, which can be imported in significant quantities. The article shows the feasibility of taking into account such a factor as the amount of solid additives in the study of melting (dissolution) processes and assimilation of solid additives by the metal melt, which turns out to be significant among a number of influential parameters in real complex physical and chemical processes of their use. Using the example of lump ferromanganese grade FeMn78 as an additive, which was introduced in different quantities (from 1 to 3 kg/t) into the bath of a ladle with a capacity of 60 tons during steel processing in a ladle-furnace unit (LFU) with simultaneous bottom blowing with argon within 50-200 l/min through a tuyere, the effect of the amount of additive on the change in the hydrodynamic and thermal state of the liquid metal bath is shown. Виробництво сталі передбачає застосування різних феросплавів, які вводяться в значній кількості в рідку металеву ванну, у тому числі, на етапі позапічної обробки. Переважна більшість феросплавів (добавок) подається у шматковому (кусковому) вигляді. Об'єм добавки може змінюватись в межах від 0,05 до декількох десятків кілограмів на тонну сталевого розплаву залежно від технологічних умов виробництва та інших вимог. До теперішнього часу дослідження і розрахунки щодо ефективності використання таких добавок при виробництві сталі базувались на розгляді поведінки їх окремого куска в рідкій металевій ванні. При цьому теоретичний опис гідродинамічного і теплового стану металевої ванни не враховував вплив кількості добавки, що вводиться. В той же час саме вказаний фактор може впливати на точність розрахункових результатів і збільшувати похибку подальшої оцінки ефективності використання коштовних феросплавів, що в значній кількості випадків можуть бути імпортованими. В статті показано доцільність врахування в дослідженні процесів плавлення (розчинення) та засвоєння металевим розплавом твердих добавок такого фактору, як їх кількість, що виявляється значущим серед низки впливових параметрів в реальних складних фізико-хімічних процесах їх використання. На прикладі кускового феромарганцю марки ФМп78 в якості добавки, який в різній (від 1 до 3 кг/т) кількості вводили у ванну ківша ємністю 60 т при обробці сталі на установці ківш-піч (УКП) з одночасною донною продувкою аргоном в межах 50—200 л/хв через фурму, показано вплив кількості добавки на зміну гідродинамічного і теплового стану рідкої металевої ванни. Physico-technological Institute of Metals and Alloys 2025-06-13 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/283 10.15407/steelcast2025.01.018 Metal and Casting of Ukraine; Vol. 33 No. 1 (2025): Metal and Casting of Ukraine; 18-24 Метал та лиття України ; Том 33 № 1 (2025): Метал та лиття України; 18-24 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/283/279 Авторське право (c) 2025 Метал та лиття України |
| spellingShingle | кількість феросплаву гідродинаміка тепловий стан рідка металева ванна Піптюк, В.П. Самохвалов, С.Є. Логозинський, І.М. Греков, С.В. Залежність стану металевої ванни від кількості застосовуваного феромарганцю на установці ківш-піч |
| title | Залежність стану металевої ванни від кількості застосовуваного феромарганцю на установці ківш-піч |
| title_alt | Dependence of the State of the Metal Bath on the Amount of Ferromanganese Used in the Ladle-Furnace Unit |
| title_full | Залежність стану металевої ванни від кількості застосовуваного феромарганцю на установці ківш-піч |
| title_fullStr | Залежність стану металевої ванни від кількості застосовуваного феромарганцю на установці ківш-піч |
| title_full_unstemmed | Залежність стану металевої ванни від кількості застосовуваного феромарганцю на установці ківш-піч |
| title_short | Залежність стану металевої ванни від кількості застосовуваного феромарганцю на установці ківш-піч |
| title_sort | залежність стану металевої ванни від кількості застосовуваного феромарганцю на установці ківш-піч |
| topic | кількість феросплаву гідродинаміка тепловий стан рідка металева ванна |
| topic_facet | Amount of ferroalloy hydrodynamics thermal state liquid metal bath кількість феросплаву гідродинаміка тепловий стан рідка металева ванна |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/283 |
| work_keys_str_mv | AT píptûkvp dependenceofthestateofthemetalbathontheamountofferromanganeseusedintheladlefurnaceunit AT samohvalovsê dependenceofthestateofthemetalbathontheamountofferromanganeseusedintheladlefurnaceunit AT logozinsʹkijím dependenceofthestateofthemetalbathontheamountofferromanganeseusedintheladlefurnaceunit AT grekovsv dependenceofthestateofthemetalbathontheamountofferromanganeseusedintheladlefurnaceunit AT píptûkvp zaležnístʹstanumetalevoívannivídkílʹkostízastosovuvanogoferomargancûnaustanovcíkívšpíč AT samohvalovsê zaležnístʹstanumetalevoívannivídkílʹkostízastosovuvanogoferomargancûnaustanovcíkívšpíč AT logozinsʹkijím zaležnístʹstanumetalevoívannivídkílʹkostízastosovuvanogoferomargancûnaustanovcíkívšpíč AT grekovsv zaležnístʹstanumetalevoívannivídkílʹkostízastosovuvanogoferomargancûnaustanovcíkívšpíč |