Аналіз впливу обважнених подач на розподіл матеріалів і газів в доменних печах
The paper presents the results of the analysis and generalization of data on the redistribution of gas flows between the center and periphery of blast furnaces equipped with conical charging devices when using weighted feeds. It was found that the use of weighted feeds causes a redistribution of the...
Gespeichert in:
| Datum: | 2025 |
|---|---|
| Hauptverfasser: | , |
| Format: | Artikel |
| Sprache: | Ukrainisch |
| Veröffentlicht: |
Physico-technological Institute of Metals and Alloys
2025
|
| Schlagworte: | |
| Online Zugang: | https://www.metalsandcasting.com/index.php/mcu/article/view/286 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Metal and Casting of Ukraine |
Institution
Metal and Casting of Ukraine| _version_ | 1859472000273088512 |
|---|---|
| author | Крячко, Г.Ю. Сігарьов, Є.М. |
| author_facet | Крячко, Г.Ю. Сігарьов, Є.М. |
| author_sort | Крячко, Г.Ю. |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2025-09-16T19:11:16Z |
| description | The paper presents the results of the analysis and generalization of data on the redistribution of gas flows between the center and periphery of blast furnaces equipped with conical charging devices when using weighted feeds. It was found that the use of weighted feeds causes a redistribution of the gas flow in the opposite direction from the optimized relatively longterm operating mode, with unloading of the periphery, the bottom of which is a generator of hot reducing gases, and loading of the center of the furnace with an iron ore component. It was found that the excessive force action of the weighted iron ore part of the feed on the charge column during its loading, as well as the overlap of the axial vent with an iron ore layer, which together lead to an increase in the resistance of the charge column, prevent the achievement of the expected reduction in the pressure drop in the charge column, the possibility of adding blast and increasing the furnace productivity. It has been confirmed that the 4K4A separate charging system loses its technological purpose when using conical charging devices, which significantly limits the control of the furnace from above, therefore the recommendation to spread the experience of using these feeds is not weighted. Weighted separate feeds according to the 4K4A system are suitable only for temporary uppression of excessive central gas flow. A classification of the causes of the negative impact of weighted feeds when using cone-type charging devices is proposed. It is recommended to avoid charging systems containing 3-4 skip feeds of iron ore materials in favor of 3 skip feeds of coke when choosing the feed mass for furnaces equipped with cone distributors and in conditions of pulverized coal fuel injection. A cardinal solution to eliminate obstacles to the use of weighted feeds is to replace cone-type charging devices with cone-less tray-type ones. |
| first_indexed | 2026-03-12T15:51:28Z |
| format | Article |
| id | oai:oai.metalsandcasting.com:article-286 |
| institution | Metal and Casting of Ukraine |
| keywords_txt_mv | keywords |
| language | Ukrainian |
| last_indexed | 2026-03-12T15:51:28Z |
| publishDate | 2025 |
| publisher | Physico-technological Institute of Metals and Alloys |
| record_format | ojs |
| spelling | oai:oai.metalsandcasting.com:article-2862025-09-16T19:11:16Z Analysis of the Influence of Weighted Feeds on the Distribution of Materials and Gases in Blast Furnaces Аналіз впливу обважнених подач на розподіл матеріалів і газів в доменних печах Крячко, Г.Ю. Сігарьов, Є.М. Blast furnace weighted feed pressure drop center periphery gas flow charging system charge доменна піч обважнена подача перепад тисків центр периферія газовий потік система завантаження шихта The paper presents the results of the analysis and generalization of data on the redistribution of gas flows between the center and periphery of blast furnaces equipped with conical charging devices when using weighted feeds. It was found that the use of weighted feeds causes a redistribution of the gas flow in the opposite direction from the optimized relatively longterm operating mode, with unloading of the periphery, the bottom of which is a generator of hot reducing gases, and loading of the center of the furnace with an iron ore component. It was found that the excessive force action of the weighted iron ore part of the feed on the charge column during its loading, as well as the overlap of the axial vent with an iron ore layer, which together lead to an increase in the resistance of the charge column, prevent the achievement of the expected reduction in the pressure drop in the charge column, the possibility of adding blast and increasing the furnace productivity. It has been confirmed that the 4K4A separate charging system loses its technological purpose when using conical charging devices, which significantly limits the control of the furnace from above, therefore the recommendation to spread the experience of using these feeds is not weighted. Weighted separate feeds according to the 4K4A system are suitable only for temporary uppression of excessive central gas flow. A classification of the causes of the negative impact of weighted feeds when using cone-type charging devices is proposed. It is recommended to avoid charging systems containing 3-4 skip feeds of iron ore materials in favor of 3 skip feeds of coke when choosing the feed mass for furnaces equipped with cone distributors and in conditions of pulverized coal fuel injection. A cardinal solution to eliminate obstacles to the use of weighted feeds is to replace cone-type charging devices with cone-less tray-type ones. У роботі наведено результати аналізу та узагальнення даних щодо перерозподілу газових потоків між центром та периферією доменних печей, оснащених конусними засипними пристроями, при використанні обважнених подач. З’ясовано, що використання обважнених подач викликає перерозподіл газового потоку в протилежному напрямку від оптимізованого відносно тривалого режиму експлуатації, з розвантаженням периферії, низ якої є генератором гарячих відновлювальних газів, і підвантаженням центру печі залізорудною складовою. Встановлено, що надмірна силова дія обважненої залізорудної частини подачі на стовп шихти при її завантаженні, а також перекриття осьової віддушини залізорудним шаром, які разом призводять до збільшення опору стовпа шихти, перешкоджають досягненню очікуваного зниження перепаду тисків в стовпі шихти, можливості добавки дуття та підвищенню продуктивності печі. Підтверджено, що роздільна система завантаження 4К4А при використанні конусних завантажувальних пристроїв втрачає своє технологічне призначення, що суттєво обмежує управління ходом печі згори, тому рекомендація поширювати досвід використання цих подач не є зваженою. Обважнені роздільні подачі за системою 4К4А придатні лише до тимчасового подавлення надмірного центрального потоку газів. Запропоновано класифікацію причин негативного впливу обважнених подач при використанні конусних засипних пристроїв. Рекомендовано уникати систем завантаження, що містять 3—4 скіпові подачі залізорудних матеріалів, на користь 3-х скіпових подач коксу, при виборі маси подачі на печах, обладнаних конусними розподільниками і в умовах вдування пиловугільного палива. Кардинальним рішенням для усунення перешкод використання обважнених подач є заміна конусних засипних пристроїв на безконусні лоткового типу. Physico-technological Institute of Metals and Alloys 2025-09-16 Article Article Рецензована Стаття application/pdf https://www.metalsandcasting.com/index.php/mcu/article/view/286 10.15407/steelcast2025.02.008 Metal and Casting of Ukraine; Vol. 33 No. 2 (2025): Metal and Casting of Ukraine; 8-14 Метал та лиття України ; Том 33 № 2 (2025): Метал та лиття України; 8-14 2706-5529 2077-1304 uk https://www.metalsandcasting.com/index.php/mcu/article/view/286/282 Авторське право (c) 2025 Метал та лиття України |
| spellingShingle | доменна піч обважнена подача перепад тисків центр периферія газовий потік система завантаження шихта Крячко, Г.Ю. Сігарьов, Є.М. Аналіз впливу обважнених подач на розподіл матеріалів і газів в доменних печах |
| title | Аналіз впливу обважнених подач на розподіл матеріалів і газів в доменних печах |
| title_alt | Analysis of the Influence of Weighted Feeds on the Distribution of Materials and Gases in Blast Furnaces |
| title_full | Аналіз впливу обважнених подач на розподіл матеріалів і газів в доменних печах |
| title_fullStr | Аналіз впливу обважнених подач на розподіл матеріалів і газів в доменних печах |
| title_full_unstemmed | Аналіз впливу обважнених подач на розподіл матеріалів і газів в доменних печах |
| title_short | Аналіз впливу обважнених подач на розподіл матеріалів і газів в доменних печах |
| title_sort | аналіз впливу обважнених подач на розподіл матеріалів і газів в доменних печах |
| topic | доменна піч обважнена подача перепад тисків центр периферія газовий потік система завантаження шихта |
| topic_facet | Blast furnace weighted feed pressure drop center periphery gas flow charging system charge доменна піч обважнена подача перепад тисків центр периферія газовий потік система завантаження шихта |
| url | https://www.metalsandcasting.com/index.php/mcu/article/view/286 |
| work_keys_str_mv | AT krâčkogû analysisoftheinfluenceofweightedfeedsonthedistributionofmaterialsandgasesinblastfurnaces AT sígarʹovêm analysisoftheinfluenceofweightedfeedsonthedistributionofmaterialsandgasesinblastfurnaces AT krâčkogû analízvplivuobvažnenihpodačnarozpodílmateríalívígazívvdomennihpečah AT sígarʹovêm analízvplivuobvažnenihpodačnarozpodílmateríalívígazívvdomennihpečah |